• 한국광학회지
• /
• 제14권3호
• /
• pp.327-330
• /
• 2003

본 논문에서는 도파로층이 1.3 $\mu\textrm{m}$ InGaAsP긴 파장 가변 BT(butt-coupled)-DBR(distributed bragg reflector)-LD(laser diode)를 제작하고, 특성을 측정하였다. Butt 결합 성장면의 성장조건을 건식식각과 선택식각 방법과 MOCVD(metal organic chemical vapor deposition)성장으로 최적화 한 후 활성층과 도파로층의 결합 효율을 측정한 결과 결합 효율이 85% 이상으로 나타났으며, 제작된 BT-DBR-LD에 연속전류를 인가 했을 때, 평균 임계전류는 약 21 ㎃, 최대 광출력이 25 ㎽ 이상으로 나타났다. 또한 위상제어 영역과 DBR영역에 각각 25㎃와 50 ㎃의 전류를 주입하여도 급격한 광출력 변화와 포화현상이 나타나지 않았다 이때 최대 파장 가변 폭은 7.4 nm, SMSR비는 40 ㏈이상으로 나타났다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1042-1047
• /
• 2008

As an ultra-precision measurement system the heterodyne laser interferometer plays an important role in semiconductor industry. However the errors of environment and nonlinearity which are caused by air refraction and frequency-mixing separately reduce the accuracy of displacement measurement. In this paper we propose a DFNN(data fusion and neural network) method for error compensation. As a hybrid method of data fusion and neural network, DFNN method reduces the environmental and nonlinear error simultaneously. The effectiveness of the proposed error compensation method is proved through experimental results.

• 공학논문집
• /
• 제3권1호
• /
• pp.171-180
• /
• 1998

저가의 파장 tuner로서 편광제어를 이용한 파장가변 고리형 광섬유레이저에 대한 분석 및 실험을 통하여 동작을 입증하였다. 이 고리형 레이저는 루프 중간에 편광기 및 편광제어기로 구성되어 있고 SOA를 이득매질로 사용하여 구현하였다. 편광제어기 및 편광기를 조절해서 파장가변을 시킬 수 있으며 1540~1560 nm의 가변 영역을 확인할 수 있었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.383-386
• /
• 2008

We developed a fiber-optic Bragg grating sensor system using a SOA fiber laser for over heat detection in power systems. To compensate the nonlinear wavelength tuning of the fiber laser, we used fixed passband wavelengths from Fabry-Perot ITU filter as reference wavelengths. Gaussian line-fitting algorithm was also used to reduce the FBG peak detection error. Compared with a highest-peak-detection and a polynomial-fitting method, the proposed Gaussian fitting algorithm could drastically reduce the measurement errors. Also the SOA fiber laser made it possible to enhance the signal-to-noise-ratio even with several kilometers of lead fiber.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.927-933
• /
• 2006

The structural and electrical characteristics of PLZT thin films fabricated onto $Pt/IrO_2/Ir/Ti/SiO_2/Si$ substrates by a pulsed laser deposition were investigated to develop the high dielectric thin films for capacitor layer of semiconductor memory devices The slim region 14/50/50 PLZT thin films were fabricated by PLD and estimated the characteristics for memory application 14/50/50 PLZT thin films have crystallize into perovskite structure at the $600^{\circ}C$ deposition temperature, 200 mTorr of oxygen pressure, and 2 $J/cm^2$ of laser energy density. In this condition PLZT thin films had the dielectric constant as high as 985, storage charge density 8.17 ${\mu}C/cm^2$ and charging time 0.20 ns. Leakage current density was less than $10^{-10}A/cm^2$ up to 5 V bias voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.469-471
• /
• 1988

The basic modeling is analyzed on the optoelectronic properties of CSP-DH laser structure using self-consistent calculation of optical field and the electron-hole distribution in the active region. Laser properties is modelled include gain profile, threshold, near field and far field pattern. This new characterization is allowed for consideration such as carrier spatial hole burning due to strong optical fields which stimulate recombination.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.28-36
• /
• 1998

Widely tunable diodes integrated with periodically sampled and chirped DBR(distributed Bragg reflector) and an EA(electroabsorption) modulator are analyzed dynamically using the improved largesinal time-domain model. The tuning characteristics of sampled- and chirped-grating DBR laser diodes are demonstrated theoretically. The results of the simulation agree well with those of the experiment. And the intensity-modulation properties of the laser diodes integrated with an EA modulator are calculated. It is shown that the external modulation has the lower frequency chirp by 1/20 for the same extinction ratio than the direct modulation, and also the short pulse train can be generated using the optical gating of an EA modulator.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.756-759
• /
• 2009

We described the growth of undoped ZnO thin films and their optical properties changing with a various growth temperature. The undoped ZnO thin films were grown on $c-Al_2O_3$ substrates using pulsed laser deposition (PLD) at room temperature, 200, 400, and $600^{\circ}C$, respectively. Field emission microscopy (FE-SEM) measurements showed that the grain size of undoped ZnO thin films are increasing as a increase of growth temperature. In addition, we were investigated that the structural and optical properties of undoped ZnO thin films by x-ray diffraction (XRD) and photoluminescence (PL) studied. Also, we could confirmed that the exciton luminescence was strongly related to charge trap by grain boundary of the samples using micro-PL measurement.

• 한국세라믹학회지
• /
• 제37권1호
• /
• pp.33-43
• /
• 2000

Up-conversion of rare-earth element added glass is promising area for short wavelength laser source by utilizing high power semiconductor infra-red laser if the efficiency can be increased by proper method. In this study, relatively low phonon energy fluoride glasses were prepared by co-doping rare-earth elements to realize the high efficiency up-convertor. The physical, chemical, andoptical properties of co-doped fluoride glasses were measured. 10 combinations of 5 different rare-earth fluoride elements doped samples were prepared and their transition temperatures, chemical durability, density, hardness, refractive index, absorption, fluorescence, and fluorescence lifetime were measured. 480nm wavelengths blue up-conversion was found in the Yb3+/Tm3+ co-doped glass sample with 800nm laser source and the optimum composition for the most efficient blue up-conversion was found from the glass sample with 0.3 mol% TmF3 and 1 mol% YbF3.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.118-119
• /
• 2007

High performance three-dimensional (3-D) stacked poly-Si complementary metal-oxide semiconductor (CMOS) inverters with a high quality laser crystallized channel were fabricated. Low temperature crystallization methods of a-Si film using the excimer-laser annealing (ELA) and sequential lateral solidification (SLS) were performed. The NMOS thin-film-transistor (TFT) at lower layer of CMOS was fabricated on oxidized bulk Si substrate, and the PMOS TFT at upper layer of CMOS was fabricated on interlayer dielectric film. The 3-D stacked poly-Si CMOS inverter showed excellent electrical characteristics and was enough for the vertical integrated CMOS applications.