• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.409-414
• /
• 2006

Sulfur-oxidizing bacteria were enumerated and isolated from a steady-state anaerobic master culture reactor (MCR) operated for over six months under a semi-continuous mode and nitrate-limiting conditions using thiosulfate as an electron donor. Most are Gram-negative bacteria, which have sizes up to 12 m. Strains AD1 and AD2 were isolated from the plate count agar (PCA), and strains BD1 and BD2 from the solid thiosulfate/nitrate medium. Based on the morphological, physiological, FAME and 16S rDNA sequence analyses, the two dominant strains, AD1 and AD2, were identified as Paracoccus denitrificans and Paracoccus versutus (formerly Thiobacillus versutus), respectively. From the physiological results, glucose was assimilated by both strains AD1 and AD2. Heterotrophic growth of strains AD1 and AD2 could be a more efficient way of obtaining a greater amount of biomass for use as an inoculum. Even though facultative autotrophic bacteria grow under heterotrophic conditions, autotrophic denitrification would not be reduced.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.162-176
• /
• 2022

In Lead-based reactor (LBR) severe accident, the meltdown and migration inside the reactor core will lead to fuel fragment concentration, which may further cause re-criticality and even core disintegration. Accurately predicting the migration and solidification behavior of melt in LBR severe accidents is of prime importance for safety analysis of LBR. In this study, the Moving Particle Semi-implicit (MPS) method is validated and used to simulate the migration and solidification behavior. Two main surface tension models are validated and compared. Meanwhile, the MPS method is validated by the L-plate solidification test. Based on the improved MPS method, the migration and solidification behavior of melt in LBR severe accident was studied furthermore. In the Pb-Bi coolant, the melt flows upward due to density difference. The migration and solidification behavior are greatly affected by the surface tension and viscous resistance varying with enthalpy. The whole movement process can be divided into three stages depending on the change in velocity. The heat transfer of core melt is determined jointly by two heat transfer modes: flow heat transfer and solid conductivity. Generally, the research results indicate that the MPS method has unique advantage in studying the migration and solidification behavior in LBR severe accident.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.36-42
• /
• 2024

Roll-to-roll processing holds an integral position within the manufacturing landscape, and its significance reverberates across numerous industries. This versatile technology platform encompasses a diverse array of process methods and accommodates a wide spectrum of material categories, making it a cornerstone of modern production. Within this expansive domain, two commonly employed coating techniques, namely the slot die and gravure coating methods, have earned their prominence for their precision and efficiency in delivering flawless coatings. Additionally, the realm of drying processes relies heavily on thermal drying, infrared (IR) drying, and ultraviolet (UV) drying methods to expedite the transformation of materials from their liquid or semi-liquid states to solid, ready-to-use products. The undeniable importance of roll-to-roll processing lies in its ability to streamline manufacturing processes, reduce costs, and enhance product quality. This article embarks on a comprehensive journey to fathom the depth of this importance by delving into the intricacies of these common roll-to-roll process methods. Through rigorous research and meticulous data collection, we aim to shed light on the pivotal role these techniques play in shaping various industries and advancing the world of manufacturing. By understanding their significance, we can harness the full potential of roll-to-roll processing and pave the way for innovation and excellence in production.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.29-35
• /
• 2014

Purpose : This study has already started commercial Gated RapidArc automation equipment which was not previously in the Gated radiation therapy can be performed simultaneously with the VMAT Gated RapidArc radiation therapy to the accuracy of the analysis to evaluate the usability, Amplitude mode applied to the patient. Materials and Methods : The analysis of the distribution of radiation dose equivalent quality solid water phantom and GafChromic film was used Film QA film analysis program using the Gamma factor (3%, 3 mm). Three-dimensional dose distribution in order to check the accuracy of Matrixx dosimetry equipment and Compass was used for dose analysis program. Periodic breathing synchronized with solid phantom signals Phantom 4D Phantom and Varian RPM was created by breathing synchronized system, free breathing and breath holding at each of the dose distribution was analyzed. In order to apply to four patients from February 2013 to August 2013 with liver cancer targets enough to get a picture of 4DCT respiratory cycle and then patients are pratice to meet patient's breathing cycle phase mode using the patient eye goggles to see the pattern of the respiratory cycle to be able to follow exactly in a while 4DCT images were acquired. Gated RapidArc treatment Amplitude mode in order to create the breathing cycle breathing performed three times, and then at intervals of 40% to 60% 5-6 seconds and breathing exercises that can not stand (Fig. 5), 40% While they are treated 60% in the interval Beam On hold your breath when you press the button in a way that was treated with semi-automatic. Results : Non-respiratory and respiratory rotational intensity modulated radiation therapy technique absolute calculation dose of using computerized treatment plan were shown a difference of less than 1%, the difference between treatment technique was also less than 1%. Gamma (3%, 3 mm) and showed 99% agreement, each organ-specific dose difference were generally greater than 95% agreement. The rotational intensity modulated radiation therapy, respiratory synchronized to the respiratory cycle created Amplitude mode and the actual patient's breathing cycle could be seen that a good agreement. Conclusion : When you are treated Non-respiratory and respiratory method between volumetric intensity modulated radiation therapy rotation of the absolute dose and dose distribution showed a very good agreement. This breathing technique tuning volumetric intensity modulated radiation therapy using a rotary moving along the thoracic or abdominal breathing can be applied to the treatment of tumors is considered. The actual treatment of patients through the goggles of the respiratory cycle to create Amplitude mode Gated RapidArc treatment equipment that does not automatically apply to the results about 5-6 seconds stopped breathing in breathing synchronized rotary volumetric intensity modulated radiation therapy facilitate could see complement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.1
• /
• pp.88-103
• /
• 2009

The volatile and semi-volatile compounds of 5 accessions of domestic scented and 25 accessions of introduced scented were extracted by solid phase microextraction (SPME) and analyzed by gas chromatographymass spectrum (GC-MS). A total of 156 volatile and semivolatile compounds were identified from 30 accessions of aromatic rice, including 32 alcohols, 25 acids, 25 ketones, 21 hydrocarbon, 18 esters, 16 aldehydes, 4 ethers, 5 amines, 2 phenols, 2 bases, and 8 miscellaneous compounds. By UPGMA/Neighbor-join tree analysis, the thirty accessions of aromatic rice could be classified into seven groups according to the major odor or aroma compounds. Group I included indica type of Basmati varieties. Group II and Group IV included japonica type introduced scented. Group III consisted only Hyangmibyeo1ho in domestic scented. Group V and Group VII included indica type of Basmati and non-Basmati varities. Group VI included four of domestic scented of seven accessions excepted Basmati6129, Basmati 6311, and Seratus Malam.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1025-1035
• /
• 2014

This study assessed the effect of immobilized lipase on weak base styrene resin using polyethyleneimine (PEI) with cross-linking. Two procedures were used in this study. The first one, "mono-layer" lipase immobilization, involves washing PEI after adsorption. The second procedure, "multi-layer" lipase immobilization, has no washing before the cross-linking step. Treverlite XS-100200 (weak base styrene resin) was immersed with PEI solution (2.2 mg/mL). Lipase AH (from Burkholderia cepacia) was adsorbed onto the support coated with PEI before cross-linking with glutaraldehyde. Structured lipid was synthesized by immobilized lipase-catalyzed interesterification using canola oil, palmitic ethyl ester (PEE), and stearic ethyl ester (StEE). Total fatty acid contents of triacylglycerol (TAG) in structured lipids were analyzed to investigate activity, properties, and reusability of immobilized lipases. Activities of immobilized lipases on the multi-layer and mono-layer increased at a high concentration (8 mg/mL) of lipase solution used for immobilization. The results show that immobilized lipase with the mono-layer method at pH 8.0 on resin had the highest total saturated fatty acid content (26.17 area%). Activity of immobilized lipase with the multi-layer method at pH 7.5 on support was lower than that of the mono-layer, but total saturated fatty acid content was 16.79 area% higher than that of lipase AH (15.01 area%).

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1071-1077
• /
• 1996

Quality changes in citron (Citrus junos) during storage were studied to investigate the efficiency, cooling properties and the washing and storage effects of hydrocooling method. As a result of plotting the nondimensionalized citron temperature versus cooling time, its cooling rate coefficient was shown to be $-0.012\;min^4{\sim}\;-0.017\;min^4\;(R^2=0.97{\sim}0.99)$ at center, and to be $-0.033\;min^4{\sim}\;0.075\;min^4\;(R^2=0.89{\sim}0.93)$ at surface. During storage, weight loss was more affected by storage temperature than by pretreatment condition and in reached $22{\sim}23%$ after 7 weeks at $15^{\circ}C\;and\;10{\sim}11%$ after 8 weeks at $5^{\circ}C$ in all samples. However, changes in moisture contents of hydrocooled citron were shown to be about $1{\sim}2%$ after 7 weeks while that of non-treated citron was about 3% after 1 week of storage at $5^{\circ}C$. And the change of pH, acidity and soluble solid content were not significantly different between each treatments during storage $5^{\circ}C\;and\;15^{\circ}C$. Changes in Hunter L, a, and b values of hydrocooled citron were lower than those of non-treated one as the storage time increased. The respiration rate of hydrocooled citron during storage at $15^{\circ}C$ was $103.63\;mg{\cdot}CO_2/kg{\cdot}hr$, which is about 50% of that of non-treated citron.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.1
• /
• pp.67-77
• /
• 2001

In search for several fatty acid with unusual structure in vegetable oils, we have found that unknown peaks were shown on GLC in the analysis of fatty acids of the lipids from the pulp of ripened jujube (Zizypus jujuba var. inermis) fruits. These fatty acids were identified as a series of cis-monoenoic acids with ${\omega}-5$ double bond system such as $C_{14:1{\omega}5}$, $C_{16:1{\omega}5}$ and $C_{18:1{\omega}5}$, including ${\omega}-7$ fatty acid as $C_{16:1{\omega}7}$ and $C_{18:1{\omega}7}$, by GLC, solid-phase extraction silver ion-column chromatographic, GLC-mass spectrometric and IR techniques. First of all, total fatty acid methyl esters were resolved into saturated and branched fatty acid, monoenoic acid, dienoic acid, and trienoic acid fraction, respectively, with 100% dichloromethane (DCM), DCM/acetone (9:1, v/v) 100% acetone, and acetone/ acetonitrile (97:3, v/v) solvent system. Unknown fatty acids were included in the monoenoic fraction and were confirmed to have cis-configuration by IR. Picolinyl esters of monoenoic fatty acids gave distinct molecular ion peak and dominant diagnostic peaks, for example, m/z 317, 220 and 260 fragment for $cis-C_{14:1{\omega}5}$, m/z 345, m/z 248 and 288 fragment for $cis-C_{16:1{\omega}5}$ and m/z 373, m/z 276 and 316 fragment for $cis-C_{18:1{\omega}5}$. In this way the occurrence of $cis-C_{16:1{\omega}7}$ and $cis-C_{18:1{\omega}7}$ could be deduced from the appearance of prominent fragments as m/z 345, 220 and 260, and m/z 373, 248 and 280. Level of total ${\omega}-5$ fatty acids amounted to about 30% in the fatty acid composition with the predominance of $C_{16:1{\omega}5}$ $ (18.7{\sim}25.0%)$, in the semi-ripened and/or ripened samples collected in September 14 ($C_{16:1{\omega}5}$ ; 18.7%, $C_{14:1{\omega}5}$ ; 3.6% and $C_{18:1{\omega}5}$ ; 3.0%), September 22 ($C_{16:1{\omega}5}$ ; 25.0%, $C_{14:1{\omega}5}$ ; 1.4% and $C_{18:1{\omega}5}$ ; 2.6%), and October $7 (C_{16:1{\omega}5}$ ; 24.7%, $C_{14:1{\omega}5}$ ; 7.7% and $C_{18:1{\omega}5}$ ; 2.5%). However, the lipids extracted from unripened jujube in July and August contain these unusual fatty acids as low as negligible. It could be observed that the level of ${\omega}-5$ fatty acids in the pulps increased sharply with an elapse of ripening time of jujube fruits. Other monoenoic fatty acids with ${\omega}-7$ series, $C_{16:1{\omega}7}$ (palmitoleic acid) and $C_{18:1{\omega}7}$ (cis-vaccenic acid) could be detected. And in the lipids of the kernel and leaf of jujube, none of ${\omega}-5$ fatty acids could be detected.