• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.75-79
• /
• 2008

In this study, the numerical process for analyzing the automotive louver fin heat exchanger was developed with a 3D microscopic and semi-microscopic analysis. In the microscopic analysis, the simulation with the detailed meshes was performed for obtaining the characteristics of the heat exchanger. From this simulation, the numerical correlations of the heat transfer and flow friction were obtained. In the semi-microscopic analysis, the Semi-microscopic Heat Exchanger (SHE) method, which is characterized by a conjugate heat transfer and porous media analysis was used with the numerical correlation from the microscopic analysis. This analysis predicted the flow and heat transfer characteristics of the louver fin heat exchanger in the wind tunnel and vehicle. In the design of the louver fin heat exchanger, this numerical process can predict the performance and characteristic of the louver fin heat exchanger.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.129-134
• /
• 2009

In the present study, the characteristic of flow distribution in the channel of a plate heat exchanger is investigated numerically. In order to accomplish the efficient and fast analyses of the flow characteristics in the channel, a semi-microscopic analysis has been performed using a porous media model. For semi-microscopic analysis using porous media, the flow resistance coefficients are obtained through the result of pressure drop in the experimental data. The results showed that the variation of mass flow rate, geometry and chevron angle strongly depend on the flow distribution in the channel. Particularly, the chevron angle is most important factor for uniform flow distribution.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.379-386
• /
• 2018

The present study addresses the direct and indirect methods of determining the mode-I fracture toughness of concrete using experimental tests and particle flow code. The direct method used is compaction tensile test and the indirect methods are notched Brazilian disc test, semi-circular bend specimen test, and hollow center cracked disc. The experiments were carried out to determine which indirect method yields the fracture toughness closer to the one obtained by the direct method. In the numerical analysis, the PFC model was first calibrated with respect to the data obtained from the Brazilian laboratory test. The crack paths observed in the simulated tests were in reasonable accordance with experimental results. The discrete element simulations demonstrated that the macro fractures in the models are caused by microscopic tensile breakages on large numbers of bonded particles. The mode-I fracture toughness in the direct tensile test was smaller than the indirect testing results. The fracture toughness obtained from the SCB test was closer to the direct test results. Hence, the semi-circular bend test is recommended as a proper experiment for determination of mode-I fracture toughness of concrete in the absence of direct tests.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.853-857
• /
• 2007

The semi-outdoor cultivation of Spirulina platens is was attempted using an underground-water-based medium. Occurrence of contaminant organisms such as Chlorella sp. and Chlamydomonas sp. was not found from a microscopic observation and bacteria were not detected from denaturing gradient gel electrophoresis(DGGE) analysis of PCR-amplified 16S rDNA during the cultivation, owing to pH control and the high quality of the underground water. The mean productivity was high at $10.5g/m^2/d$ with a range of $4.2-12.3g/m^2/d$ despite the unfavorable weather conditions of the rainy season. The cultivated S. platens is included a normal protein content of 58.9%. Consequently, the underground water improved the biomass productivity and the biomass quality because of an abundant supplementation of natural minerals and through a contaminant-free culture.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.121-128
• /
• 2009

This study has proposed the signal operating system to use both semi-actuated signal control and pedestrian push-button as a way to make up for the problems of 3 leg intersections which are operated inefficiently in the signal operation, one of the methods of traffic operations. In case of the semi-actuated signal control, it can reduce delay inside the intersection by serving to uncongested traffic on the main road where there is not much traffic volume on the secondary road and push-button signal can reduce unnecessary waiting time it could happen to vehicles by operating it though there is no pedestrian. Quantitative analysis was tried regarding the average delay reduction per vehicle using VISSIM, microscopic simulation program regarding how much effect it has compared with the existing signal control system and semi-actuated signal control system when the above two advantages are collected. The field test was performed for one three-leg intersection of Incheon. According to respectively signal control method pedestrian traffic changed and executed a sensitivity analysis. The result which compares the average delay time per a vehicle of scenarios, the signal control method of using the pedestrian push-button system in comparison with the fixed signal control method showed to decrease effect of a minimum 3.7 second (10%), a maximum 5.8 second (16%). When the pedestrian traffic volume was 20% or less of the measurement traffic volume, The signal control method of using the pedestrian push-button system appeared to be more efficient the semi-actuated signal control with object intersection.

• Transactions of Materials Processing
• /
• v.24 no.3
• /
• pp.194-198
• /
• 2015

Microstructure based FE simulations were conducted to investigate the micro-mechanical properties of ferrite-martensite dual-phase steels. The FE model was built based on real microstructure images which were characterized by optical microscopy through the thickness direction. Serial sectioned 2D images were converted into semi-2D representative volume elements (RVEs) model. Each RVE model was subjected to a non-proportional loading condition and the mechanical response was analyzed on both the macroscopic and microscopic levels. Macroscopically, stress-strain curves were described under tension-compression and tension-orthogonal tension conditions and the Bauschinger effect was well captured for both loading paths. In addition, micromechanical properties were investigated in the view of stress-strain partitioning and strain localization during monotonic tension.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.89-93
• /
• 2023

This study is a case study of the Ukrainian military's asymmetric combat performance method. The composition of this study is as follows. First, it presented the background for the outbreak of war in the macroscopic framework of Russia-Ukraine. Second, the Ukraine-Russia war, which broke out in February 2022, presented the justification for the study, that is, the direction of the Ukrainian military's asymmetric combat performance in terms of microscopic aspects of the study, and detailed analysis of precision strikes using commercial drones and advanced sensors. Finally, we covered in-depth the case of Ukrainian troops who attempted to attack Russian tanks using semi-automatic laser homing technology. Therefore, the Korean military organization also suggested the justification for gradually introducing and utilizing the system for the Ukrainian military's asymmetric combat performance method, and related follow-up studies should be actively conducted following this study.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2015

Organogels are semi-solid systems that consist of an apolar solvent as the liquid phase within a three-dimensional networked structure. In this study, we developed a stable and skin penetration-enhanced Lecithin Organogel (LO) containing genistein, which is one of the poorly soluble active ingredients in both polar and apolar phase. After screening of various components (type of gelators, organic and aqueous phase), hydrogenated lecithin (HL), sunflower oil (SO), dipropylene glycol (DPG), and polyethylene glycol (PEG) were mainly used in this formulation. Phase ternary diagram was employed for optimization of the composition in the LO. The formulated LO were evaluated for its organoleptic characteristics, stability, pH, rheology, phase transition temperatures, microscopic analysis and skin penetration. The optimized stable LO system can be utilized as an effective and stable cosmetic formulation that can carry poorly soluble active ingredients at high concentration for topical dermal delivery.

• Journal of fish pathology
• /
• v.24 no.3
• /
• pp.297-305
• /
• 2011

A trap identification system for isolating functional sequences to allow the constitutive expression of foreign protein from Edwardsiella tarda was developed. Using the green fluorescent protein (GFP) reporter-based trap system, various functional sequences to drive heterologous expression of the GFP were selectable in Escherichia coli host. However from the bioinformatic sequence analysis, all the segments predicted as regulatory regions were not native promoters actually existing upstream of endogenous E. tarda genes. Instead, a number of non-authentic sequences, possibly resulted from the random shuffling and/or intermolecular ligation were also proven to be able to display a potent GFP expression in the recombinant E. coli. Further analysis with selected clones showed that both authentic and non-authentic sequences could function in as a constitutive promoter, leading quite a consistent and stable GFP expression after repetitive subcultures. Microscopic examination also confirmed the uniform pattern of GFP expression in every host bacterium. Semi-quantitative assay of GFP showed that there was no clear relationship between expression levels and organizational features of the promoters trapped. Functional promoter-like elements achieved in the present study could be a good starting material for multivalent genetic engineering of E. tarda in order to produce recombinant vaccines in a cost-effective fashion.

• The Korea Journal of Herbology
• /
• v.36 no.1
• /
• pp.87-95
• /
• 2021

Objective : Liquidambaris Storax, the processed resin of Liquidambar orientalis Mill., has been therapeutically used as orifice-opening medicinals in Korean Medicine. However, unauthenticated resinous drugs from various origins were sold as Liquidambaris Storax. This study aimed to establish the quality assessment of genuine Liquidambaris Storax and to provide quantitative differences of Liquidambaris Storax in herbal markets. Methods : Bibliographic research on ancient Liquidambaris Storax was performed using classic books of herbology. The quality assessment was approached by searching modern books of herbal medicines. The marker compounds in Liquidambaris Storax from various origins were quantitatively analyzed using high-performance liquid chromatography. Results : L. orientalis was botanically characterized by palmately 5-lobed shape of leaves. Genuine Liquidambaris Storax was recognized as resinous or semi-solid form (ancient―Song dynasty) to liquid form (Myeong/Cheong dynasty) and two processed forms were available in current markets. Genuine liquid Liquidambaris Storax should be lengthened as a thread when it was lifted by a stick and be sunken under the water. The crystals of cinnamic acid was seen under microscopic observation and the scent of benzaldehyde occurred after the treatment with potassium permanganate. Cinnamyl alcohol, cinnamic acid, and cinnamaldehyde were quantified in two liquid samples of Liquidambaris Storax, while cinnamaldehyde was not quantified in resinous (semi-solid) sample. Conclusion : This study presents the detailed methods of quality assessment for genuine Liquidambaris Storax as well as the status in the herbal markets. Further quantitative study with diverse samples is required to establish the quality standard of Liquidambaris Storax.