• Journal of environmental and Sanitary engineering
• /
• v.23 no.3
• /
• pp.9-22
• /
• 2008

This study was conducted to develop a system that processes harmful gases and dust, which being generated in the production of micro-inorganic fabric. This can be obtained by melt spinning raw materials such as agalmatolite, fluorspar, limestone, silica under high temperature at $1500-1600^{\circ}C$ in a glass recuperator using a dry method by Cyclone Reactor or Envelope Type (ET) type Bag Filter. If the number of the members of Korea Glass Industry Association reaches up to 45, the damage of the harmful gas being generated in recuperator should not be small. In addition, research of existing facilities showed the most of harmful gas treatment facilities which adopt wet treatment or semi-dry treatment process. This was caused the problems for wastewater and the second pollutive materials. Moreover, in the dust collecting facility behind recuperator, it is also problematic that electric dust collector requires enormous initial investment. We have researched various methods to show both economic and efficient new processes for the preventive facilities of recuperator. As the result of the experiments, the removal efficiencies of HF and SOx were 99% and 87%, respectively. Although it was insignificant reaction, a pretty much interesting result that NOx showed an absorption reaction with $Ca(OH)_2$(removal efficiency was more than 25%) was obtained.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.245-250
• /
• 2003

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL (Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAlN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL(Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.144-148
• /
• 1992

The purpose of this study is to develop a continuous process for sorbitol production using dried Zymomonas mobilis immobilized in K-carrageenan. The methods of glularaldehyde cross-linking of enzymes in CTAB (celyltrimetylammoniumbromide) treated cells immobilized in K-carrageenan showed stability for the production of sorbitol for 30 days of operation. K-carrageenan beads entrapping permeabilized cells were dried to Improve bead rigidity and storage stability. A semi-batch process with dry beads was carried out and only a small loss of enzyme activity (less than 8%) was observed during 72h. The value of Vmax for the dry K-carrageenan beads was found to be one half or that for free cells. It was shown that the productivities of the continuous process with wet K-carrageenan beads and dry beads at a dilution rate 0.1h-1 were 3.4g/L-h and 2.88h/L-h, respectively.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.2
• /
• pp.135-143
• /
• 2017

This study evaluated the quality characteristics of semi-dried noodles prepared with different water contents (wet noodles; 32, 24, 22, 20%, dry noodles; 12%). The drying process was carried out in a drying chamber at $13{\sim}18^{\circ}C$ temperature and 75~95% humidity. The proximate composition of Korean wheat flour was as follows: water $22.1{\pm}3.64%$, protein $8.6{\pm}0.13%$, fat $1.3{\pm}0.10%$, ash $0.7{\pm}0.02%$, carbohydrates $67.3{\pm}0.10%$. As water contents decreased, both L and b values significantly decreased before cooking of noodles, whereas L, a, and b values were not significantly different after cooking of noodles. Weight, water absorption, and volume of cooked noodles significantly increased as water content decreased, whereas turbidity of soup was not significantly different. Cutting hardness before cooking of noodles significantly increased as water content decreased. Sections of noodles after cooking by SEM (scanning electron microscopy) showed roughness and fewer round starch particles as water content decreased. For overall preferences according to the sensory evaluation, noodles prepared with different water contents were not significantly different. According to the results, semidried noodles have development potential to complement the disadvantages of both wet noodles and dry noodles.

• Culinary science and hospitality research
• /
• v.23 no.4
• /
• pp.185-192
• /
• 2017

This study examined the optimum conditions and obtained the basic data for processing semi-dried sea cucumber flakes. During the boiling process, the weight and length of the sea cucumber decreased to 45.61% and 55.87%, respectively. Thereafter, there was a gradual decrease in the weight and length of the sea cucumber, which were finally maintained at 30.00% and 50.93%, respectively. The moisture content during drying was 38.37% after 3 hours at $60^{\circ}C$, and 36.56% after 5 hours at $30^{\circ}C$. However, the decrease in moisture content was slowly at 60 hours and $4^{\circ}C$, reaching a final value of 68.9%. The length of boiled sea cucumber during drying decreased to 66.35% after 11 hours at $60^{\circ}C$, and 68.90% after 24 hours at $30^{\circ}C$. The chromaticity and hardness tended to increase during the drying process. Moisture content and water activity of sea cucumber flakes decreased from 81.48% (0.963) to 33.50% (0.763), respectively, after 3 hours at $60^{\circ}C$. Following this, the moisture content and water activity continuously decreased to 30.75% (0.608) at 4 hours and 19.47% (0.437) at 5 hours, respectively. The overall acceptance score was 4.11 and 3.89 for 4 hours dry sample and 5 hours dry sample, respectively. However, the score was not statistically significant.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.28-33
• /
• 2004

At present, industry and researchers are looking for ways to reduce the use of lubricants because of ecological and economical reasons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. This paper presents an investigation into MQL(Minimum Quantity Lubrication) machining with the objective of deriving the optimum cutting conditions for the turning process of SM45C. To reach these goals several finish turning experiments were carried out, varying cutting speed, feed rate and oil quantity, with MQL. The surface roughness results of tests were measured and the effects of cutting conditions were analyzed by the method of Analysis of Variance(ANOVA). From the experimental results and ANOVA, it is found that a better surface roughness can be obtained by decreasing oil quantity and feed rate.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.09a
• /
• pp.3-12
• /
• 2006

The main feature of these total technologies is that we can constitute the optimum treatment scheme fitting to the property of wastes, amount of wastes and energy requirement. For high moisture content wastes or biomass resources, high pressure steam process (MMCS) for crush, dry and deodorize wastes to produce high quality fertilizer of fuel is most appropriate. For dry or semi-dry solid wastes, the STAR-MEET system can be applied to produce low-BTU gases for power generation using duel fueled diesel engines of Stirling engines, and the REPRES and HyPR-MEET systems can be applied to produce hydrogen rich medium-BTU gas. For waste plastics and oils, liquefaction technology is best fit to produce light oil or kerosene equivalent fuel oils. These total technologies are completely different from the existent waste treatment technologies based on land-filling or incineration, and are expected to disseminate all over the world in the near future.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.221-226
• /
• 2002

As environmental restriction has continuously become more strict, machining technology has emphasized on development of environment-friendly technologies. In cutting technology, it has been well recognized that cutting fluids might have undesirable effects on workers health and working environment and, hence, recently there have been numerous attempts to minimize harmful effects of cutting fluids on environments. To minimize the use of cutting fluids in machining, conventional cutting fluids have been replaced with the technologies of pressurized cold air and minimum quantity lubrication (MQL). Compared with milling, turning is continuous cutting process, where tools are continuously heated up and lack of lubricity could lead to tool wear and deteriorated surface roughness. In this work, it has been investigated how tool wear and surface roughness could be affected by cutting conditions, supply and cooling methods. The experimental results show that MQL technology is able to minimize conventional cutting fluids.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.313-319
• /
• 2015

This study relates to an investigation into semi-dry manufacturing process of BP sludge based on non-heating production method. In this study, we conducted a research into reduction of water content ratio which arose from mixture of BP by-products of high water content ratio(50% or higher) with industrial by-products to use such BP by-products as construction materials in large quantity. We measured the reduction rate of water content ratio at the feeding ratio of water content reduction agent(1:0.5) in BP by-products. The results showed that water content ratio was the lowest with 18.5% in the mixture of PA+CFA(1:0.5). Moreover, water content ratio ranged between approximately 9.2% and 11.4% at the age of 1 day to 2 days at the aging temperature of $20-30^{\circ}C$, suggesting that the water content ratio was in the range within 10% which was a level suitable for use as construction material in this study. Meanwhile, we compared and evaluated the physical properties of non-heated BP by-products based on post-aging pulverization method. The results showed that there was no significant difference, depending on pulverization method. When production efficiency and economic feasibility were taken into consideration, it was found desirable to use fine particle pulverizer or pin mill enabling continuous production.