• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.440-447
• /
• 2009

Domestic ruminant animals are reared in diverse production systems, ranging from extensive systems under semi-arid and tropical conditions with poor feed resources to intensive systems in temperate and cold areas with high quality feed. Nitrogen (N) recycling between the body and gut of ruminants plays a key role in the adaptation to such diverse nutritional conditions. Ammonia and microbial protein produced in the gut and urea synthesized in the liver are major players in N-recycling transactions. In this review, we focus on the physiological factors affecting urea production and recycling. Sheep and buffalo probably have higher abilities to reabsorb urea from the kidney compared with cattle. This affects the degree of urea-N recycling between the body and gut at both low and high N intakes. The synthesis and gut entry of urea also differs between cattle bred for either dairy or beef production. Lactating dairy cows show a higher gut entry of urea compared with growing cattle. The synthesis and recycling of urea dramatically increases after weaning, so that the functional development of the rumen exerts an essential role in N transactions. Furthermore, high ambient temperature increases urea production but reduces urea gut entry. An increase in total urea flux, caused by the return to the ornithine cycle from the gut entry, is considered to serve as a labile N pool in the whole body to permit metabolic plasticity under a variety of physiological, environmental and nutritional conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.416-423
• /
• 2003

During the last ten years, the need has been increased for reducing maintenance cost for aged equipments and ensuring safety, efficiency and profitability of petrochemical and refinery plants. RBI (Risk Based Inspection) methodology is one of the most promising technologies satisfying the need in the field of integrity management. In this study, a user-friendly software, realRBl for RBI based on the API 581 code was developed. This software has modules for evaluating qualitative and semi-quantitative risk level, analyzing quantitative risks using the potential consequences of a failure of the pressure boundary, and assessing the likelihood of failure. A quantitative analysis was performed for 16 columns in a domestic NCC (Naphtha Cracking Center) plant whose operating time reaches about 12 years. Each column was considered as two equipment parts by dividing into top and bottom. Generic column failure frequencies were adjusted based on likelihood data. After determining release rate, release duration and release mass for each failure scenario, flammable/explosive and toxic consequences were assessed. Current risks for 32 equipment parts were evaluated and risk based prioritization were determined as a final result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.689-692
• /
• 2008

Noises from ceiling mounted air-conditioning units were recorded in various actual situations such as offices, classrooms and libraries. Eight specimens of air-conditioners from major domestic and foreign manufacturers' were investigated in this study. A head and torso simulator was located 1.5 m beneath the air-conditioner panel for the measurements and sound pressure levels of the recording sounds were varied from 28 to 55 dBA with 3 dB steps for subjective evaluations. A total of 88 stimuli was randomly presented to subjects using a headphone system in semi-anechoic chamber. Two-categorized (noisiness and amenity) nine-point scale was used as evaluation method. The third scale ('point 3') among the nine-point scale was set as the threshold of allowable level of the air-conditioning sounds in consideration of the real situations. The results indicate that the allowable sound pressure level is around 34 dBA for both noisiness and amenity categories.

• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.250-259
• /
• 2011

Objectives: Intimate partner violence (IPV) is a significant global public health concern, affecting 5.3 million US individuals annually. An estimated 1 in 3 women globally are abused by an intimate partner in their lifetime, and the effects carry over into the workplace. This article examines employers' perceptions of IPV in the workplace, targeting supervisors of Latina employees. Methods: Fourteen employers and supervisors of small service-sector companies in Oregon were interviewed using semi-structured interviews. Interpretive description was used to identify themes. These qualitative interviews preceded and helped to formulate a larger workplace intervention study. Results: The following themes were found and are detailed: (1) factors associated with recognizing IPV in the workplace, (2) effects of IPV on the work environment and (3) supervisors' responses to IPV-active vs. passive involvement. Also, supervisors' suggestions for addressing IPV in the workplace are summarized. Conclusion: These findings demonstrate the need for more IPV-related resources in the workplace to be available to supervisors as well as survivors and their coworkers. The needs of supervisors and workplaces vary by site, demonstrating the need for tailored interventions, and culturally appropriate workplace interventions are needed for Latinas and other racially and ethnically diverse populations.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.2
• /
• pp.139-146
• /
• 1996

The aero-industry is union industry which includes a research development type, a knowledge accumulation type and a developed country type. The aero-industry of Korea is in semi-developed type stage but departed later than that of other country such as Taiwan, Indonesia etc. Therefore, the necessity of domestic airplane material is required. This study on 7050Al extruded alloy aims to suggest an adequate heat treatment conditions of T73, T74 and T76. The results of this study show that; 1. The optimum conditions of T7x heat treatment in extruded 7050Al alloy show this; $$T73:121^{\circ}C{\times}7hr+177^{\circ}C{\times}14hr$$. $$T74:121^{\circ}C{\times}7hr+177^{\circ}C{\times}10hr$$. $$T76:121^{\circ}C{\times}7hr+163^{\circ}C{\times}21hr$$. 2. The 2nd step aging heat treatment such as T73, T74 and T76 etc. is efective in 7050Al alloy but the variation otf microstructure and mechanical property with dispersive inclusions produced for extrusion process causes some troubles. Accordingly, in order to produce a good 7050Al alloy, a careful attention is needed in manufacturing process.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.844-857
• /
• 2016

The purpose of this study was to figure out the meaning and value of DIY shown in the fashion industry today, to analyze the types and characteristics of DIY applied to the products of domestic and global fashion brands, and to provide implications for brand marketing strategies. This study was based on qualitative research which was media contents analysis and brand case study on fashion DIY. The results were as follows: First, the concept of DIY involved the Semi-DIY way that meant individuals participated in not every step of design and making process but a part of them such as design process. Also, it was means for customization. Second, the value of DIY consisted of individual value, experiential value, enjoyable value, self-actualizaion value, social value, economic value and ethical value. Third, fashion DIY was classified into seven types: DIY choosing and assembling design components of a product, DIY modifying a design with trimming, DIY making a product by using DIY Kits, DIY modifying a design after making a product by using DIY Kits, DIY choosing design components, DIY designing, and DIY all making and designing. DIY could be applied as a key marketing strategy for mass customization to meet the value of individual consumer.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.57-63
• /
• 2013

Arid areas have a significant problem with water supply due to climate change and high water demand. More than 3,000 years ago, Persians started constructing elaborate tunnel systems called Qanat for extracting groundwater for agriculture and domestic usages in arid and semi-arid areas and dry deserts. In this paper, it has been demonstrated that ancient methods of water management, such as the Qanat system, could provide a good example of human wisdom to battle with water scarcity in a sustainable manner. The purpose of this paper is twofold: Review of old wisdom of Qanat-to review the history of this ancient wisdom from the beginning until now and study the Qanat condition at the present time and to explore why (notwithstanding that there are significant advantages to the Qanat system), it will no longer be used; and suggestions for future water management-to suggest a number of new methods based on new materials and technology to refine and protect Qanats. With these new suggestions it could be possible to refine and reclaim this method of extracting water in arid areas. Also, a new multi-purpose water management model has been introduced based on rainwater infiltration management over the Qanat system as the model can be applied either in dry or wet cities to solve current urban water problems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4726-4732
• /
• 2013

The Domestic boat has been manufactured by hull form of typical foreign boat. In this study, design environment for polyethylene boat is analysed to create new hull form of the boat and design elements are extracted from existing boats and consumer preferences. Key elements in polyethylene boat design are three words "semi-classic, urban and sporty". Hull resistance and engine power for new developed boat can be expected by Orca 3D program. This result indicates that engine power of the boat is much less than that of commercial boat.

• Journal of Korea Game Society
• /
• v.13 no.2
• /
• pp.111-118
• /
• 2013

The US military is developing and improving SE-CORE and CVE to integrate war game between different kinds of systems, establish time-optimal CVE. Although South Korea is researching SEDRIS, etc. that is suitable for domestic circumstances, there are still many problems to be solved. The researchers suggest a way to semi-automate part of SNE process, by using the channel information of the image. This can help to improve speed of creating synthetic environment and facilitate information sharing to the others. If there is further research on the subject, it will be possible to develop automation technology to apply data from various information collection devices to synthetic battlefield environment (SBE).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1388-1392
• /
• 2013

Electric scooter has been using short-lived, low-efficiency DC motor. And motor control system is equipped with imported uniformly, so there is no product differentiation. Also, product design according to the characteristics of disability is difficult. In this study, BLDC motor control system to specialize in a electric scooter for disabled was developed with a semi-permanent features of life, low price, and high performance. This development will also contribute to the activation of the related industries, as well as be able to secure price competitiveness of domestic electric scooter.