• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.240-244
• /
• 2000

The three-dimensional orientation distribution function of a conical shaped tungsten liner prepared by the thermo-mechanical forming process was analyzed by 1.525$\AA$ neutrons to carry out the Rietveld refinement. The pole figure data of three reflections, (110)(220) and (211) were measured. The orientation distribution functions for the normal and radial directions were calculated by the WIMV method. The inverse pole figures of the normal and radial directions were obtained from their orientation distribution functions. The Rietveld refinement was performed with the RIETAN program that was slightly modified for the description of preferred orientation effect. We could successfully do the Rietveld refinement of the strongly textured tungsten liner by applying the pole density of each reflection obtained from the inverse pole figure to the calculated diffraction pattern. The correction method of preferred orientation effect based on the inverse pole figures showed a good improvement over the semi-empirical texture correction based on the direct usage of simple empirical functions.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.67-74
• /
• 2019

Visual inspection is regarded as one of the critical activities for quality control in a manufacturing company. it is thus important to improve the performance of detecting a defective part or product. There are three probable working modes for visual inspection: fully automatic (by automatic machines), fully manual (by human operators), and semi-automatic (by collaboration between human operators and automatic machines). Most of the current studies on visual inspection have been focused on the improvement of automatic detection performance by developing a better automatic machine using computer vision technologies. However, there are still a range of situations where human operators should conduct visual inspection with/without automatic machines. In this situation, human operators'performance of visual inspection is significant to the successful quality control. However, visual inspection of components assembled into a mobile camera module belongs to those situations. This study aims to investigate human performance issues in visual inspection of the components, paying more attention to human errors. For this, Abstraction Hierarchy-based work domain modeling method was applied to examine a range of direct or indirect factors related to human errors and their relationships in the visual inspection of the components. Although this study was conducted in the context of manufacturing mobile camera modules, the proposed method would be easily generalized into other industries.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.1-7
• /
• 2015

The weight estimation of floating offshore structures such as FPSO, TLP, semi-Submersibles, Floating Offshore Wind Turbines etc. in the preliminary design, is one of direct measures of both construction cost and basic performance. Through both literature investigation and internet search, the weight data of floating offshore structures such as FPSO and TLP was collected. In this study, the weight estimation model with the genetic programming was suggested for FPSO. The weight estimation model using genetic programming was established by fixing the independent variables based on this data. In addition, the correlation analysis was performed to make up for the weak points of genetic programming; it is apt to induce over-fitting when the number of data is relatively smaller than that of independent variables. That is, by reducing the number of variables through the analysis of the correlation between the independent variables, the increasing effect in the number of weight data can be expected. The reliability of the developed weight estimation model was within 2% of error rate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.11 s.242
• /
• pp.1527-1533
• /
• 2005

Three methods for design sensitivity analysis such as finite difference method(FDM), direct differentiation method(DDM) and adjoint variable method(AVM) are well known. FDM and DDM for design sensitivity analysis cost too much when the number of design variables is too large. An AVM is required to compute adjoint variables from the simultaneous linear system equation, the so-called adjoint equation. Because the adjoint equation is independent of the number of design variables, an AVM is efficient for when number of design variables is too large. In this study, AVM has been extended to the eigenproblem of damped systems whose eigenvlaues and eigenvectors are complex numbers. Moreover, this method is implemented into a commercial finite element analysis program by means of the semi-analytical method to show applicability of the developed method into practical structural problems. The proposed_method is compared with FDM and verified its accuracy for analytical and practical cases.

• Journal of the Korean Dietetic Association
• /
• v.26 no.3
• /
• pp.208-220
• /
• 2020

In modern society, the online to offline (O2O) market has become an emerging market. Based on social and cultural phenomena, the importance of "FOODTECH" linked with mobile applications is growing in the food and restaurant industry. This study examined subjective food application service quality, perceived value, and post-purchase behavior intentions. According to this study, of foodtech service quality attributes, only information, mobility, and reliability had positive (+) relationships with perceived value. However, foodtech service quality attributes did not have a direct impact on behavior intentions. Perceived values had a positive (+) relationship with behavior intentions and showed full mediation effects between foodtech service quality attributes and behavior intentions. Based on these results, future research on the relationship among food application service quality, perceived value, and post-purchase behavior intentions is needed.

• Structural Engineering and Mechanics
• /
• v.41 no.5
• /
• pp.675-689
• /
• 2012

Most connections of steel structures exhibit flexible behaviour under cyclic loading. The flexible connections can be assumed as nonlinear rotational springs attached to the ends of each beam. The nonlinear behaviour of the connections can be considered by suitable moment-rotation relationship. Time-history analysis by direct integration method can be used as a powerful technique to determine the nonlinear dynamic response of the structure. In conventional numerical integration, the response is evaluated for a series of short time increments. The limitations on the size of time intervals can be removed by using Chen and Robinson improved time history analysis method, in which the integrated displacements are used as the new variables in integrated equation of motion. The proposed method permits longer time intervals and reduces the computational works. In this paper the nonlinearity behaviour of the structure is summarized on the connections, and the step by step improved time-history analysis is used to calculate the dynamic response of the structure. Several numerical calculations which indicate the applicability and advantages of the proposed methodology are presented. These calculations illustrate the importance of the effect of the nonlinear behaviour of the flexible connections in the calculation of the dynamic response of steel frames.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.629-635
• /
• 2014

This paper describes propagation characteristics obtained by considering semiconducting screen and cross-bonding in underground transmission cables. The semiconducting screen of power cable has effect on propagation characteristics including attenuation, velocity and surge impedance. However, it is very difficult to apply the semiconduction screen for EMTP model because of the number of conductors limitation. Therefore, CIGRE WG 21-05 proposed advanced insulation structure and analysis technique of simplified approach including inner and outer semiconducting screen. In this paper, the various propagation characteristics analyse using this structure and technique for 154kV XLPE $2000mm^2$ cable. The frequency independent model of EMTP CABLE PARAMETER is used for just pattern analysis of propagation characteristics. For exact data analysis, the frequency dependent model of J-marti is used for EMTP modeling. From these result, various propagation characteristics of 154kV XLPE $2000mm^2$ cable according to semi conducting screen consideration, frequency range, cable length and pulse width are analysed. In addition, in this paper, the effects of cross-bonding are also variously discussed according to cross-bonding methods, direct connection and impedance of lead cable.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.618-620
• /
• 2003

Harmonics of sea surface temperature (SST) in the East Sea and their possible causes are examined by analyzing NOAA/AVHRR data, SSM/I wind speeds, NSCAT wind vectors, and NCEP heat flux data. Detailed spatial structures of amplitudes and phases of the seasonal cycles and their contributions to the total variance of SST have quantitatively. The Subpolar front serves as a boundary between regions of high annual amplitudes (${\geq}$10$^{\circ}$C) in the cold continental region and low amplitudes (${\leq}$10$^{\circ}$C) in the Tsushima Warm Current region. The low phase center of annual cycle is located over a seamount at 132.2$^{\circ}$E, 41.7$^{\circ}$N south of Vladivostok. Semi-annual amplitudes are significantly large leaching over 20% of the annual amplitudes in the Tatarskiy Strait and along the continental shelf off Russian coast in fall and spring, but its forcings are substantially annual. We have shown that fall cooling is attributed by direct and local wind forcing, while spring cooling is remotely forced by cold waters from sea ices in the Tatarskiy Strait.

• Nutritional Sciences
• /
• v.3 no.1
• /
• pp.36-41
• /
• 2000

The aim of this study was to evalute the effect of multivitamin-mineral supplementation during pregnancy on plasma levels of antioxidants, erythrocyte antioxidant enzyme activities, and lipid peroxidation. A controlled, semi-randomized, prospective trial was performed by comparing the supplement group, which received multivitamin-mineral tables once daily for 10 weeks, with the control group. Plasma levels of $\beta$-carotene, tocopherol, coenzyme Q10, ascorbate, folate, zinc, and selenium and malondialdehyde (MDA), as well as the activities of superocxide dismutase(SOD) and glutathione peroxidase(GSH-Px) in erythrocytes were measured initially (20 wk gestation) and at the end of the intervention (34 wk gestation). In the control group, plasma ascorbate and selenium levels decreased and tocopherol levels increased. In the supplement group, a significant increase in plasma $\beta$-carotene(46%), conenzyme Q10 (42%), and zinc (24%) was observed after 10 weeks of supplementation. No changes were observed in the plasma levels of MDA, and erythrocyte GSH-Px activity, while SOD activity increased in both control group and the supplement group during the intervention. These data suggest that multivitamin-mineral supplementation during pregnancy produced moderate increases in plasma $\beta$-carotens, coenzyme Q10, and zinc concentrations but the enhancement of those plasma antioxidants had on direct on the plasma level of MDA, erythrocytes SOD or GSH-Px activities.

• Steel and Composite Structures
• /
• v.11 no.3
• /
• pp.251-271
• /
• 2011

To make direct comparisons regarding the cyclic behavior of thin steel plate shear walls (TSPSWs) with different infill-to-boundary frame connections, two TSPSWs were tested under quasi-static conditions, one having the infill plate attached to the boundary frame members on all edges and the other having the infill plate connected only to the beams. Also, the bare frame that was used in the TSPSW specimens was tested to provide data for the calibration of numerical models. The connection of infill plates to surrounding frames was achieved through the use of self-drilling screws to fish plates that were welded to the frame members. The behavior of TSPSW specimens are compared and discussed with emphasis on the characteristics important in seismic response, including the initial stiffness, ultimate strength and deformation modes observed during the tests. It is shown that TSPSW specimens achieve significant ductility and energy dissipation while the ultimate failure mode resulted from infill plate fracture at the net section of the infill plate-to-boundary frame connection after substantial infill plate yielding. Experimental results are compared to monotonic pushover predictions from computer analysis using strip models and the models are found to be capable of approximating the monotonic behavior of the TSPSW specimens.