• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.403-410
• /
• 2003

To enhance the performance of a rice seed pelleting machine and the quality of rice-seed pellets made, improvement of the rice seed pelleting machine developed previously(Park, 2002) was tried and its performance was evaluated. As compared with the previous pelleting machine, a feeding mechanism of pellet materials to the forming rolls was changed from screw conveyor to hydraulic cylinder for proper feeding, rings were installed among rows of semi-spherical forming grooves on the forming rolls for reducing pellet materials loss and seeds damage, and discharging air nozzles were added for complete discharging of the pellets made. Through performance tests, capacity, pelleting ratio, and seed loss ratio of the pelleting machine were investigated at the mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : 1, and rotating speeds of the forming rolls of 7 rpm, 10 rpm, and 13 rpm. As results of performance evaluation, pelleting ratios were in the range of 77 ∼ 89 ％, and maximum pelleting ratio increased by 18 % in comparison with that of the previous machine. Maximum capacity was about 110 kg/h(about 63,000 pellets/h), which was increased by 70 % in comparison with that of the previous machine. But, ratios of seed loss were in the range of 24 - 49 ％, which were not improved.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.123-135
• /
• 2007

The objective of this study is to analyze the relationship between traffic accidents occurring at trumpet interchange ramps according to accident type as well as the relevant factors that led to the traffic accidents, such as geometric design elements and traffic volumes. In the process of analysis of the distribution of traffic accidents, negative binomial distribution was selected as the most appropriate model. Negative binomial regression models were developed for total trumpet interchange ramps, direct ramps, loop ramps and semi-direct ramps based on the negative binomial distribution. Based upon several statistical diagnostics of the difference between observed accidents and predicted accidents with four previously developed models, the fit proved to be reasonable. Understanding of statistically significant variables in the developed model will enable designers to increase efficiency in terms of road operations and the development of traffic accident prevention policies in accordance with road design features.

• Journal of Preventive Medicine and Public Health
• /
• v.41 no.4
• /
• pp.255-264
• /
• 2008

Objectives: This study adopted a qualitative method to explore the layman's beliefs and experience concerning high blood pressure and its management in order to develop a strategy to increase adherence to proper medical treatment. Methods: Semi-structured interviews that focused on personal experiences with hypertension and its management were conducted with 26 hypertensive patients. The participants were selected according to a BP above 140/90 mmHg (hypertension stage 1), based on the seventh report of the Joint National Committee on prevention, detection, evaluation and treatment of high blood pressure (JNC-VII). The interviews lasted for approximately 30 minutes (range: 20-60 minutes). The resulting questions were formulated into open-ended questions. The interview questionnaire was composed 17 items to examine non-adherence to treatment and 19 items to examine adherence to treatment. Results: Most participants recognized that the direct cause of high blood pressure was unhealthy behavior rather than inheritance. Thus, the hypertensive patient believed they could recover their blood pressure to a normal level through removing the direct cause of hypertension (weight reduction, diet, exercise) instead of taking drugs. The reasons for these statements were that the drugs for controlling hypertension are not natural or they are artificial, and they may have side effects, and drugs are not treatment for the root cause of hypertension. Most of the hypertensive patients chose to manage their behaviors as soon as they knew their blood pressure was high. Therefore, we should not divide the subjects into two groups according to their taking drugs or not, but they should be divided into two groups according to their willingness or not to manage their condition. Conclusions: For developing a strategy for an individual approach to hypertension management, we need to develop a client-centered attitude and strategy. That is, we need to tailor our approach to individual cases to avoid generalizations and stereotyping when developing an adherence increasing strategy.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.3
• /
• pp.127-141
• /
• 2015

Silver-based systems activated by low intensity direct current continue to be investigated as an alternative antimicrobial for infection prophylaxis and treatment. However there has been limited research on the quantitative characterization of the antimicrobial efficacy of such systems. The objective of this study was to develop a semi-mechanistic pharmacokinetic/pharmacodynamic (PK/PD) model providing the quantitative relationship between the critical system parameters and the degree of antimicrobial efficacy. First, time-kill curves were experimentally established for a strain of Staphylococcus aureus in a nutrientrich fluid environment over 48 hours. Based on these curves, a modified PK/PD model was developed with two components: a growing silver-susceptible bacterial population and a depreciating bactericidal process. The test of goodness-of-fit showed that the model was robust and had good predictability ($R^2>0.7$). The model demonstrated that the current intensity was positively correlated to the initial killing rate and the bactericidal fatigue rate of the system while the anode surface area was negatively correlated to the fatigue rate. The model also allowed the determination of the effective range of these two parameters within which the system has significant antimicrobial efficacy. In conclusion, the modified PK/PD model successfully described bacterial growth and killing kinetics when the bacteria were exposed to the electrically activated silver-titanium implant system. This modeling approach as well as the model itself can also potentially contribute to the development of optimal design strategies for other similar antimicrobial systems.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.987-995
• /
• 2019

Steam jet condensation is of great importance to pressure suppression containment and automatic depressurization system in nuclear power plant. In this paper, the condensation processes of sonic steam jet in a quiescent subcooled pool are recorded and analyzed, more precise understanding are got in direct contact condensation. Experiments are conducted at atmospheric pressure, and the steam is injected into the subcooled water pool through a vertical nozzle with the inner diameter of 10 mm, water temperature in the range of $25-60^{\circ}C$ and mass velocity in the range of $320-1080kg/m^2s$. Richardson number is calculated based on the conservation of momentum for single water jet and its values are in the range of 0.16-2.67. There is no thermal stratification observed in the water pool. Four condensation regimes are observed, including condensation oscillation, contraction, expansion-contraction and double expansion-contraction shapes. A condensation regime map is present based on steam mass velocity and water temperature. The dimensionless steam plume length increase with the increase of steam mass velocity and water temperature, and its values are in the range of 1.4-9.0. Condensation heat transfer coefficient decreases with the increase of steam mass velocity and water temperature, and its values are in the range of $1.44-3.65MW/m^2^{\circ}C$. New more accurate semi-empirical correlations for prediction of the dimensionless steam plume length and condensation heat transfer coefficient are proposed respectively. The discrepancy of predicted plume length is within ${\pm}10%$ for present experimental results and ${\pm}25%$ for previous researchers. The discrepancy of predicted condensation heat transfer coefficient is with ${\pm}12%$.

• Journal of Korean Dental Science
• /
• v.16 no.1
• /
• pp.23-34
• /
• 2023

Purpose: This study aims to investigate the force delivery profile of thermoformed aligners (TFA) compared with direct-printed aligners (DPA) and to explore the effect of different activation amounts on forces and moments of respective groups. A secondary objective is to observe the amount of stress relaxation that occurs over the 7~14 days when aligners are maintained in a simulated intraoral environment. Materials and Methods: An in vitro setup was created to quantify forces and moments. It consisted of a three dimensional-printed base plate and segmented maxillary teeth, placed in a semi-enclosed chamber to maintain a temperature of 37℃. Ninety clear aligners were divided into nine groups of ten aligners each based on material types (Zendura, ATMOS, TC-85) and activation amounts. Aligners were created with 0.00, 0.25- and 0.50-mm activations for lingual bodily movement of the upper left central incisor and kept on models in the "stressed" position in a 37℃ water bath. Three force components acting on the upper left lateral incisor, upper left central incisor, and upper right central incisor were measured for each time point, beginning from the initial baseline measurement, 8 hours, 16 hours, 24 hours, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, and lastly, 14 days. Result: TC-85 aligners in every activation group showed less force on teeth than Zendura and ATMOS. Significant force levels from 0.0 mm activation were present and stayed consistent over the course of 14 days. Comparisons made for baseline measurements to 7-days and 14-days showed statistically significant change from the baseline force level. Conclusion: TC-85 aligners demonstrated lower, more consistent forces with fewer side effects. Aligners can generate forces even when no activation is programmed. No major decreases in force levels over time were observed; the intra-oral clinical simulated environment and length of observation time could contribute to this.

• The Journal of the Korean dental association
• /
• v.41 no.1 s.404
• /
• pp.35-41
• /
• 2003

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined theimpression quality in clinical condition and the wettability of impression material. Three commercially available addition silicone impression material (Imprint; 3M, USA, Examix; GC, Japan, Perfect; Handae, Korea) were studied. A total of 90 putty/wash impressions of semi-dried premolars and wet molar teeth were examined for void production in impression body. The percentae of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned casts from the impressions with stereomicroscope. Three impression materials were used to produce die stone casts from vcid entrapment die. Voids in the stone casts were counted with the stereomicroscpe. From the experiment, the following results were obtained: 1. In direct observation, Imprint showed greatest numbers of void in impression body (P<.001).However, correlations were not found between sulcus reproduction and void production. 2. Sulcus reproduction ability of additional silicone impression material was diminished in order of Imprint, Examix, Perfect. The significant difference was found between Imprint and other material (P<.001). 3. In void entrapment laboratory test, void productions was diminished in order of Examix, Imprint, Perfect. All voids in casts were less in delayed poured cast than immediately poured cast. 4. Especially, the stone pouring time of Perfect impression material should be delayed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.4
• /
• pp.290-295
• /
• 2000

The joint treatment of concrete is one of the technical problems in top down construction method. Joints created with the top down construction result in serious weakness from the aspects of both structural and water-barrier function. Ultrasonic method was used for the inspection of top down construction joints of a various column in SRC structure in this study. The advantages and limitations of this method for non-destructive inspection in top down construction joints are investigated. As a result, it has been verified that the semi-direct measurement method is more effective than the other methods for detecting the voids of construction joints using ultrasonic method.

• Journal of Korean Library and Information Science Society
• /
• v.38 no.4
• /
• pp.257-276
• /
• 2007

Back-of-book-style indexes have a similar function as back-of-book indexes. The best advantage o4 back-of-book-style indexes for Information access on the web is to give direct access to specific subjects of interest. Though back-of-book-style indexes are alphabetically arranged as back-of-book indexes, they have linked index entries to contents on the site by using a anchor tag of HTML. In this research, I have created back-of-book-style indexes in two separated ways, by hand-crafted and semi-automatic Indexing. We have utilized back-of-book-style indexes, that is similar to back-of-book index of traditional information organization method of library and information science, in library circumstances.

• Bulletin of the Korean Mathematical Society
• /
• v.35 no.4
• /
• pp.641-652
• /
• 1998

Chung and et al. ([2].1991) introduced a new concept of a manifold, denoted by $^{\ast}g-SEX_n$, in Einstein's n-dimensional $^{\ast}g$-unified field theory. The manifold $^{\ast}g-SEX_n$ is a generalized n-dimensional Riemannian manifold on which the differential geometric structure is imposed by the unified field tensor $^{\ast}g^{\lambda \nu}$ through the SE-connection which is both Einstein and semi-symmetric. In this paper, they proved a necessary and sufficient condition for the unique existence of SE-connection and sufficient condition for the unique existence of SE-connection and presented a beautiful and surveyable tensorial representation of the SE-connection in terms of the tensor $^{\ast}g^{\lambda \nu}$. Recently, Chung and et al.([3],1998) obtained a concise tensorial representation of SE-curvature tensor defined by the SE-connection of $^{\ast}g-SEX_n$ and proved deveral identities involving it. This paper is a direct continuations of [3]. In this paper we derive surveyable tensorial representations of constracted curvature tensors of $^{\ast}g-SEX_n$ and prove several generalized identities involving them. In particular, the first variation of the generalized Bianchi's identity in $^{\ast}g-SEX_n$, proved in theorem (2.10a), has a great deal of useful physical applications.