• Journal of Aerospace System Engineering
• /
• v.7 no.4
• /
• pp.55-61
• /
• 2013

In recent years, NASA, FAA and the aerospace industry, through MIL-HDBK-17 and the NASA-conceived AGATE(Advanced General Aviation Transport Experiments) program, have worked together to reduce the qualification burden imposed on individual aircraft manufacturers. AGATE is one of the most successful public/private cost-haring partnerships ever conceived, bringing together academia, the FAA, other government agencies and industry to develop affordable new technologies and accompanying industry standards and certification methods. In 2005, NASA established NCAMP(National Center for Advanced Materials Performance) with the purpose of refining and enhancing the AGATE process to a self-sustaining level to serve the entire aerospace industry in partnership with CMH-17, FAA, and SAE. In this paper, I will introduce briefly NCAMP process and explain its organization structure and core NCAMP documents. This paper can provide some help in establishing our certification system for composite materials where the NCAMP process is expected to be the most good model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.521-527
• /
• 2001

The dynamic performance analyses and tests for a 50kW turbo-generator (KIMM-TG50) were carried out. The operating concept of this machine is that it gets the initial driving force from the built-in motor-generator until it reaches its self-sustaining speed of 40,000 rpm, and then the driving mode is changed to self-operating mode by the combustor installed between the centrifugal compressor and the turbine. Due to winding mistake of motor-generator, the system could go only up to 22000 rpm by the motor so that high pressure air externally fed into the turbine was utilized to get the system to run up to 62,000 rpm thereafter. The vibration data collected during the tests revealed that the first bending critical speed is in near 5,600 rpm as predicted in the design stage of the rotor-bearing system, and that there were no other identifiable critical speeds up until 62,000 rpm due to high damping from the squeeze film damper-bearings supporting the rotor. This paper presented some of the experimental results along with dynamic performance predictions made in the design stage as a part of progress being made.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.491-499
• /
• 2020

Background: Assembly lines work is frequently associated to work-related upper limb musculoskeletal disorders. The related disability and absenteeism make it important to implement efficient health surveillance systems. The main objective of this study was to identify self-reported variables that can determine work-related upper limb musculoskeletal symptoms-discomfort/pain-during a 6-month follow-up. Methods: This was a prospective study with a 6-month follow-up period, performed in an assembly line. Upper limb musculoskeletal discomfort/pain was assessed through the presence of self-reported symptoms. Uni- and multivariate logistic regression analyses were used to evaluate which self-reported variables were associated to upper limb symptoms after 6 months at the present and to upper limbs symptoms in the past month. Results: Of the 200 workers at baseline, 145 replied to the survey after 6 months. For both outcomes, "having upper limb symptoms during the previous 6 months" and "education" were possible predictors. Conclusion: Our results suggest that having previous upper limb symptoms was related to its maintenance after 6 months, sustaining it as a specific determinant. It can be a hypothesis that this population had mainly workers with chronic symptoms, although our results give only limited support to self-reported indicators as determinants for upper limb symptoms. Nevertheless, the development of an efficient health surveillance system for high demanding jobs should implicate self-reported indicators, but also clinical and work conditions assessment should be accounted on the future.

• Korean System Dynamics Review
• /
• v.13 no.4
• /
• pp.33-55
• /
• 2012

The research is to identify important diffusion factors and their effects on green car diffusion process using system dynamics perspectives and a causal-loop analysis. Through a deep review on previous research, we have found the important factors of green car diffusion process. Price, driving range, network effect, recharge system, fuel cost had important facilitation on consumer attraction and green car diffusion. Based on the review, we have constructed a causal loop diagram explaining hybrid car diffusion process. We have found 3 important reinforcing loops in the causal loop diagram. Loop for learning & economies of scale(supply side), loop for network effect(consumer side), and loop for battery development(technology side) had most significant roles in the whole diffusion process. Through a deliberate analysis on the 3 causal loops, we have found meaningful results. First, there seems to exist a critical mass in the diffusion. Second, of the 3 loops, the battery technology had most significant role. Third, not consumer installed base but sales must be a standard to decide whether the critical mass is achieved or not. Based on these findings, several meaningful implications are suggested for the government and corporations related to the green car industries.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.2
• /
• pp.94-99
• /
• 2018

Depending on how the energy storage system(ESS) is used in a system that can construct a microgrid by using an independent power source such as campus, surplus power can be generated that can not be charged to the ESS. For example, assuming that heat is supplied by a fuel cell in the case of a system in which thermal self-sustaining is prioritized, the fuel cell capacity required differs depending on the heat load. The amount of surplus power that can not be stored in the ESS will appear differently depending on the load operation of the fuel cell for each cycle. This power is hydrogenated through a water electrolytic device to present the amount of hydrogen energy that can be operated for each cycle. Therefore, this paper propose the possibility of utilizing University campus as a hydrogen station.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1640-1641
• /
• 2011

다양한 환경에서 USN 시스템이 적용됨에 따라 해당 시스템의 효율적인 전력 운용 및 통신 방식이 중요해 지고 있다. 이에 본 논문에서는 태양전지를 사용하여 획득한 전력을 효율적으로 배터리에 충전시키기 위해 히스테리시스 스위치를 사용한 에너지 획득모듈, 센서노드의 효율적인 전력운영을 위해 아이디 기반의 웨이크업 모�뺐� 센싱정보를 전송후 자체적으로 전력을 차단하는 동적전력관리 모듈을 제안 및 구현을 통해 센서노드의 효율적인 전력 운용을 검증했다.

• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1339-1348
• /
• 2018

The aim of this paper is to determine neutronic performances of the light water reactor (LWR) spent fuel mixed with fertile thorium fuel in a FFHR. Time dependent three dimensional calculations for major technical data, such as blanket energy multiplication, tritium breeding ratio, cumulative fissile fuel enrichment and burnup have been performed by using Monte Carlo Neutron-Particle Transport code MCNP5 1.4, coupled with a novel interface code MCNPAS, which is developed by our research group. A self-sustaining tritium breeding ratio (TBR>1.05) has been kept throughout the calculations. The study has shown that the fissile fuel quality will be improved in the course of the transmutation of the LWR spent in the FFHR. The latter has gained the reusable fuel enrichment level conventional LWRs between one and two years. Furthermore, LWR spent fuel - thorium mixture provides higher burn-up values than in light water reactors.

• The Southeast Asian review
• /
• v.22 no.2
• /
• pp.171-199
• /
• 2012

Saman, a novel written by Ayu Utami, has been recognized as the symbol of the politico-social changes, which began to occur since the collapse of Suharto' New Order regime in 1998. In the novel, Ayu Utami showed the spirits of resistance against various absurd socio-political circumstances during the New Order era such as pressure on discussion, abuse of power, politics-business collusion, patriarchism, and suppression of gender. In representing those spirits, Ayu Utami used unconventional structure-making, fresh feedback and multilayered descriptions of the figures, which brought her a fame as the pioneer of the Fragrant Literature (Angkatan Wangi or chick-lit). Ayu Utami particularly criticized that, under the name of sustaining the national integrity and identity, the New Order regime enhanced patriarchal system, which consequently infringed gender equality and women's rights to self-determination. In addition, Ayu Utami argued that the abuse of power and politics-business collusion, which were prevalent during the New Order period, destroyed lives of the masses and the Indonesian society.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.235-242
• /
• 1998

Aiming at one of decisive alternatives for long term aspect of nuclear power concerns, an integral and closed nuclear system, AMBIDEXTER (Advanced Molten-salt Break-even Inherently-safe Dual-mission Experimental and TEst Reactor) concept is under development. The AMBIDEXTER complex essentially comprises two mutually independent loops of the radiation/material transport and the heat/energy conversion, centered at the integrated reactor assembly, which enables one to utilize maximum benefits of nuclear energy under minimum risks of nuclear radiation. And it provides precious radioisotopes and radiation sources from its waste stream. Also the reactor operates at very low level of fission products inventory throughout its lifetime. The nuclear and thermalhydraulic characteristics of the molten TH/$^{233}$ U fuel salt extend the capability of the self-sustaining AMBIDEXTER fuel cycle to enhance resource security and safeguard transparency. The reactor system is consisted of a single component module of the core, heat exchangers and recirculation pumps with neither pipe connections nor active valves in between, which will significantly improve inherent features of nuclear safety. States of the core technologies associated with designing and developing the AMBIDEXTER concept are mostly available in commercialized form and thus demonstration of integral aspects of the concept should be the prime area in future R＆D programs.

• Journal of Aerospace System Engineering
• /
• v.10 no.3
• /
• pp.63-69
• /
• 2016

The properties of composite materials, when compared to those of metallic materials, are highly variable due to many factors including the batch-to-batch variability of raw materials, the prepreg manufacturing process, material handling, part-fabrication techniques, ply-stacking sequences, environmental conditions, and test procedures. It is therefore necessary to apply reliable statistical-analysis techniques to obtain the design allowables of composite materials. A new composite-material qualification process has been developed by the Advanced General Aviation Transport Experiments (AGATE) consortium to yield the lamina-design allowables of composite materials according to standardized coupon-level tests and statistical techniques; moreover, the generated allowables database can be shared among multiple users without a repeating of the full qualification procedure by each user. In 2005, NASA established the National Center for Advanced Materials Performance (NCAMP) with the purpose of refining and enhancing the AGATE process to a self-sustaining level to serve the entire aerospace industry. In this paper, the statistical techniques and procedures for the generation of the allowables of aerospace composite materials will be discussed with a focus on the pooling-across-environments method.