• 한국실내디자인학회논문집
• /
• 제3호
• /
• pp.91-99
• /
• 1994

The purpose of this study was to determine the long term effect of a pleasantly designed interior on pro-saptial behavior. For pleasantly designed interior, the existing interior was remodeled through the change of finishing materials for major architectural elements such as wall, floor and ceiling, and changes of furniture and it's arrangement . Pro-spatial behavior was operationalized as seat arranging behavior and measured through the arranged condition and observable arranging behavior. Time-series design, one of quasi-experimental design was used. The data in this study were extracted from an existing field experimental research. Five hundred survey video tapes record during 2 years period were used. In conclusion, the pleasantly designed environment has a long term effect on the pro-spatial behavior change . While self-centered pro-spatial was improved continuously and even reinforced , altruistic pro-spatial behavior was improved but diminished as time passed. There were no differences in the effect between male and female children. The result of the research provide scientific background of an answer to why Interior Design.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.66-71
• /
• 2011

This study analyzed the mechanical characteristics and evaluated their subsequent performance for two types of seals which reinforced characteristics with lower friction and anti-wear functions among the foremost important features in the automotive engine seals; one with the addition of glass fiber to PTFE(Polytetrafluoro ethylene); the other with the addition of self-lubricant molybdenumin addition to the glass fiber. Based on the configuration design of seal installed to the front part in the automotive engine, this study carried out interpretations on the stress and reaction for those two types of oil seals to compare the maximum stress and contact load generated from the seal steel, rubber and PTFE lip. This study also verified the stress concentration and anti-wear performance through the coefficient of friction, torque and durability test by producing two types of PTFE seals actually.

• 지역사회간호학회지
• /
• 제23권1호
• /
• pp.51-62
• /
• 2012

Purpose: The purpose of this study was to identify community health nursing activities that community health practitioners perceive and their achievements in community by reviewing the community health nursing activities that community health practitioners have done for the last 30 years. Methods: This study was a qualitative study. Thirty one community health practitioners were interviewed using the focus group interview method and data were analyzed using content analysis. Data were collected from April to June in 2011. Results: Community health practitioners perceived themselves as "Community Vitalizers" and 9 categories were identified. They were 'ground to explore new nursing areas', 'assimilation to community', 'ground to establish community diagnosis', 'everyday life health management in the community', 'increased accessibility to medical services for the residents', 'enforced health practices for the residents', 'reinforced self-reliance of community', 'commitment to making a happy village' and 'mental fence of the community.' Conclusion: This study was meaningful in that it explained the unique identity of the community health practitioners and could be used as important basic materials in the process of re-establishment of the roles of Health Offices. Hereafter in-depth study on community competence reinforcement should be made to identify the roles of community health nurses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.349-352
• /
• 2008

본 연구는 보통강도(30MPa) 고유동 자기충전 콘크리트를 구조체에 적용하기 위하여 두개의 철근콘크리트 보(고유동 자기충전 콘크리트 실험체, 일반 콘크리트 실험체)를 제작하여 4점 재하실험을 수행하고, 고유동 자기충전 콘크리트와 일반 콘크리트의 휨 거동 특성을 비교 분석 하였다. 실험 결과 모든 실험체는 휨에 의해 연성적인 파괴양상을 보였다. 고유동 자기충전 콘크리트와 일반 콘크리트 실험체의 강성 및 연성은 유사한 거동을 보였으나, 고유동 자기충전 콘크리트가 일반 콘크리트에 비해 균열제어 효과가 뛰어난 것으로 나타났다. 이상의 결과로 고유동 자기충전 콘크리트는 현장 적용이 가능할 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.174-176
• /
• 2005

This treatise studies composing process that renew information mastered by interactive experience between environment and system via network among individuals. In the previous study map information regarding free space is learned by using of reinforced learning algorithm, which enable each individual to construct optimal action policy. Based on those action policy each individuals can obtain optimal path. Moreover decision process to distinguish best optimal path by comparing those in the network composed of each individuals is added. Also information about the finally chosen path is being updated. A self renewing method of each system information by sharing the each individual data via network is proposed Data enrichment by shilling the information of many maps not in the single map is tried Numerical simulation is conducted to confirm the propose concept. In order to prove its suitability experiment using micro-mouse by integrating and comparing the information between individuals is carried out in various types of map to reveal successful result.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.43-49
• /
• 2003

This research work has been carried out for finding J-integral in mode II of CFRP(carbon fiber reinforced plastics) laminate plates based on the classical bar theory in dynamic conditions with consideration of the effect of inertia forces, eventually to lead to finding the dynamic inter-layer fracture toughness. Dynamic inter-layer fracture toughness was found by a self-made ENF(End Notched Flexure) experimental apparatus using Split Hopkinson's Bar(SHPB), and also observed the variation of the fracture toughness haying different resin contents and fiber arrangements of CFRP specimen([$0_3^{\circ}/90_3^{\circ}/0_6^{\circ}/90_3^{\circ}/0_3^{\circ}$], [$0_{20}^{\circ}$], [$0_5^{\circ}/90_{10}^{\circ}/0_5^{\circ}$]). As an experimental result, in either cases of quasi-static or dynamic load condition, the critical load and the inter-layer fracture toughness increased sharply depending on the increase of resin contents. Therefore, it could, be concluded that the effect by resin contents is the major factor determining the inter-layer fracture toughness in the CFRP laminate plates.

• Computers and Concrete
• /
• 제12권4호
• /
• pp.499-518
• /
• 2013

Fiber reinforced polymer (FRP) jackets have been widely used as an effective tool for the strengthening and rehabilitation of concrete structures, especially damaged concrete columns. Therefore, a clear understanding of the compressive behavior of FRP-confined concrete is essential. The objective of this paper is to develop a simple efficient method for predicting the compressive strength, the axial strain at the peak stress, and the stress-strain relationship of FRP-confined concrete. In this method, a compressive strength model is established based on Jefferson's failure surface. With the proposed strength model, the strength of FRP-confined concrete can be estimated more precisely. The axial strain at the peak stress is then evaluated using a damage-based formula. Finally, a modified stress-strain relationship is derived based on Lam and Teng's model. The validity of the proposed compressive strength and strain models and the modified stress-strain relationship is verified with a wide range of experimental results collected from the research literature and obtained from the self-conducted test. It can be concluded that, as a competitive alternative, the proposed method can be used to predict the compressive behavior of FRP-confined concrete with reasonable accuracy.

• Steel and Composite Structures
• /
• 제22권5호
• /
• pp.1163-1192
• /
• 2016

This paper presents the cost optimization of a composite I beam floor system, designed to be made from a reinforced concrete slab and steel I sections. The optimization was performed by the mixed-integer non-linear programming (MINLP) approach. For this purpose, a number of different optimization models were developed that enable different design possibilities such as welded or standard steel I sections, plastic or elastic cross-section resistances, and different positions of the neutral axes. An accurate economic objective function of the self-manufacturing costs was developed and subjected to design, resistance and deflection (in)equality constraints. Dimensioning constraints were defined in accordance with Eurocode 4. The Modified Outer-Approximation/Equality-Relaxation (OA/ER) algorithm was applied together with a two-phase MINLP strategy. A numerical example of the optimization of a composite I beam floor system, as presented at the end of this paper, demonstrates the applicability of the proposed approach. The optimal result includes the minimal produced costs of the structure, the optimal concrete and steel strengths, and dimensions.

• 한국실내디자인학회논문집
• /
• 제17권5호
• /
• pp.3-11
• /
• 2008

'The eye' and 'the gaze' organize the visual system and distinguish the subject from the others. Recent philosophical thoughts have forcefully argued against the tradition characterized by the domination of the eye that assimilates the alterity of the others to one's own, cancels their alterity, and totalizes their differences within himself. In the speculative discourse modeled on the eye, the alienation of self in its other and the reflection of the object are linked together in such a way as to form a totality in which they are reflected into one's another, leaving absolutely no remainder outside. By contrast to this totalizing tendency of the eye, Sartre and Lacan propose the gaze that becomes constitutive of vision. The modern architecture reinforced subject's eye and clearly separated the others from subject Through Descartes's visual paradigm, space became homogeneous and nature was seized by architecture. However, recently the clear boundary between subject and object is disappearing. Lacan insisted that oneself's eye and the other's gaze are mixed up in human sight This means that the boundary between the subject and the other is indistinct and also the boundary between an object and landscape is meaningless in architecture. The overthrow of gaze in contemporary architecture appears in the form of trans-boundary, translucency and widen architectural notion and expression.

• 소성∙가공
• /
• 제29권4호
• /
• pp.179-187
• /
• 2020

Existing composite forming processes such as the autoclave, prepreg compression forming (PCF), RTM, etc. require high production costs because of their long processing time. On the other hand, microwave heating process (MHP) can reduce the production costs since both mold and composite material can be heated directly. The aim of this study is to manufacture a mold consisting of polytetrafluoroethylene (PTFE), quartz glass, stainless steel clamps, and polyether ether ketone (PEEK) bolts for fabricating FML based on self-reinforced polypropylene (SRPP) using the MHP. First, the flame test was carried out prior to the MHP to check the temperature on the mold and whether the spark occurred at the mold and the edge of the FML. Second, the uniaxial tensile test was then conducted to obtain the mechanical properties of the FML manufactured by the MHP. The mechanical properties were compared with those of the FML fabricated by the PCF. As a result, the MHP using the PTFE mold can manufacture the FML more rapidly than the PCF, and obtain acceptable mechanical properties.