• Bulletin of the Korean Chemical Society
• /
• 제23권2호
• /
• pp.325-329
• /
• 2002

In this study, the dependency of the behavior of propagating front on the reaction condition in frontal polymerization reaction has been studied. We have used some multifunctional acrylates as a monomer and ammonium persulfate as an initiator for the polymerization reactions. In frontal polymerization, a method of producing polymeric materials via a thermal front that propagates through the unreacted monomer/initiator solution, the behavior of self propagating front shows various dynamic patterns depending on the reaction condition. We have obtained some spin modes of propagating front in the number of 'hot spots' or 'spin heads' by changing the reaction condition. The effect of the reactor tube diameter on the mode of propagating front has also been studied by using some reactor tubes with different size of tube diameter and it has been examined in some detail by adopting an experimental method of two-tubes system.

• 한국분말재료학회지
• /
• 제30권3호
• /
• pp.233-241
• /
• 2023

In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.

• 한국분말재료학회지
• /
• 제2권2호
• /
• pp.158-164
• /
• 1995

Synthesis of the NiTi shape memory alloy using the thermal explosion mode of the self-propagating high-temperature synthesis has been investigated. The significant fractions of intermetallics phases were found to form at the Ti/Ni powder interface during the heating to the ignition temperature and seemed to influence the relative fraction of phases in the final products. As the heating rate to the ignition temperature was increased, the combustion temperature and the fraction of NiTi in the final reaction products were increased. The synthesis reaction under 70 MPa compressive pressure yielded a reaction product with 98% theoretical density.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.931-937
• /
• 1995

AlN powder and whiskers were synthesized by direct nitridation of aluminum powder in pure nitrogen atmosphere. The nitridation reaction of aluminum powder was initiated by heating the sample to the ignition temperature and the reaction was finished in less than 3 minutes. AlN whisker-shaped morphology was observed predominantly when the sample was heated above 90$0^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.299-304
• /
• 2016

Nitrate-citrate 혼합 전구체로부터 ZnO 입자 합성을 위한 자체진행 반응(Self-propagating reaction)의 특성을 고찰하였다. 질화물과 Citrate 그룹간의 자체진행 반응을 위해 탄소/질소 성분의 비는 0.7~0.8 수준으로 유지하였으며, 출발물질의 시료를 TGA방법에 의해 열분해하였다. 반응의 후반부인 반응 전환율이 0.5 이상에서 자체진행 반응의 특성을 나타내었으며 시료는 매우 짧은 시간에 많은 열을 방출하며 분해되었다. 반응의 전반부(X<0.5)가 전체반응의 율속단계로 나타났으며, 이 율속단계에서 반응의 특성을 Friedman, Ozawa-Flynn-Wall 그리고 Vyazovkin의 방법들을 사용하여 해석하였다. 율속단계에서 활성화 에너지는 46~130 (kJ/mol)의 범위로 반응 전환율이 증가함에 따라 증가하였으며, 반응차수는 2.9~0.9, 그리고 반응속도의 빈도인자(Frequency factor)는 85~278 ($min^{-1}$)의 범위에서 승온속도가 증가함에 따라 각각 전자는 감소하고 후자는 증가하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 추계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.11-12
• /
• 2000

Non-stoichiometric ceramics of $Ni_{x}ZnO_{1-x}Fe_{2}O_{4}$ were prepared by self-propagating high temperature synthesis reaction with various processing conditions and their stoichometric numbers were determined by neutron diffraction. The neutron diffraction patterns were measured at room temperature using monochromatic neutrons with a wave length of 0.18339 nm from a Ge(331) mocochromator at a 90 degree take off angle. The Rietveld refinement of each pattern converged to good agreement (x2=1.88-2.24). The neutron diffraction analysis revealed the final stoichiometries of the ferrites were $Ni_{0.38}Zn_{0.62}Fe_{2}O_{4}$ and $Ni_{0.33}Zn_{0.67}Fe_{2}O_{4]$, respectively. This supports that final stoichiometric number of the self-propagating high temperature synthesis product can be controlled by the processing parameters during the combustion reaction.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.155-158
• /
• 2002

Fabrication process of metal/intermetallic laminated composites by using self-propagating high temperature synthesis(SHS) reactions between Ni and Al elemental metal foils have been investigated. Al foils were sandwiched between Ni foils and heated in a vacuum hot press to the melting point of aluminium. SHS reaction kinetics was thermodynamically analyzed through the final volume fraction of the unreacted Al related with the initial thickness ratio of Ni:Al and diffusion bonding stage before SHS reaction. Thermal aging of laminated composites resulted in the formation of functionally gradient series of intermetallic phases. Microstructure showed that the main phases of intermetallics were NiAl and $Ni_3Al$ having higher strength at room and high temperatures. The volume fractions of intermetallic phases were measured as 82.4, 58.6, 38.4% in 1:1, 2:1, 4:1 initial thickness ratio of Ni:Al.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.332-337
• /
• 2000

Forming mechanism of fibrous TiC during self-propagating high temperature synthetic reaction was analyzed and suggested. It was revealed that critical temperature for the stable fiber formation was not the melting point of TiC, but the eutectic reaction temperature of TiC and C. Minimum amount of TiC diluent addition required to form fibers was calculated to be 25.6%, which was consistent with the experimental result. Synthesized fibers were found hollow tube-like. The morphology was explained by the diffusion rates of C and Ti in TiC, and by the molar volume chnage of C during the reaction. Expanding shell model was suggested for the hollow fiber formation mechanism.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.120-127
• /
• 1998

The finite element method has been used to model and analyze the heat transfer phenomena during manufacturing process of $MoSi_2$ by SHS(Self-propagating High-temperature Synthesis). For this purpose nonlinear transient heat transfer analyses by using ANSYS have been performed to estimate the temperature distributions and the peak temperature in the test specimen. The effects of manufacturing process parameters such as pre-heating temperatures, the velocity of reaction zone have been investigated. The results of the analysis have been compared with the experimental results.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.749-756
• /
• 1998

TiC-Ni and TiC-Ni-Mo cermet powders were produced by Self-propagating High temperature Synthesis (SHS) process. The cooling rate of synthesized powders were controlled by using the V-shaped copper jig and the carbide size decreased with increasing the cooling rate I. e decreasing the width of copper jig Round shape carbide particles were produced after SHS reaction in TiC-Ni as well as TiC-Ni-Mo powders. Local segregation of Mo rich phases was observed in SHS powder of TiC-Ni-Mo and the uneven dis-triobution of Mo promoted the faster growth rate of carbide particles during sintering compared to the same composition specimen with commercial TiC powder. Howogeneous microstructure of TiC-Ni-Mo cermet was obtained when the elemental Mo powder was mixed with the SHS powder of TiC-Ni.