• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.419-422
• /
• 2011

본 논문에서는 초저전력 어플리케이션을 위한 이중입력 자가 전력관리 시스템을 제안한다. 자가 발전 시스템의 전력 공급원으로는 PZT와 solar cell소자를 병합하여 사용한다. 제한된 전력관리 회로는 solar cell 출력 전압을 승압하기 위한 charge pump 회로, PZT의 출력을 DC로 변환하기 위한 rectifier, 수확된 에너지를 병합 및 관리하기 위한 전력관리회로로 구성된다. 설계된 회로는 CMOS 0.18um technology를 이용하여 성능을 검증하였다. 설계된 회로의 칩 면적은 $295um{\times}275um$ 이다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1117-1126
• /
• 2017

The main contribution of this paper is the use of sensorless active diodes to generate the gate signals for a three-phase boost-rectifier with a self-powered control scheme. The sensorless operation is achieved making use of the gate control signals generated by the active diode schemes on each of the switching devices using a pulse width half-controlled boost rectifier modulation technique (PWM-HCBR). The proposed scheme synchronizes the gate control signals with a three phase voltage supply. Autonomous operation is obtained making use of the output DC bus to feed the control circuitry, the active diodes and the driver circuitry. The three-phase boost-rectifier is supplied by a three-phase permanent magnet electric generator powered by a solar concentrator dish with variable voltage and variable frequency conditions. Experimental results report an efficiency of up to 94.6% for 25 W and an input of 3.6 V peak per phase with 450.

• 센서학회지
• /
• 제25권3호
• /
• pp.229-234
• /
• 2016

Self-powered neutron detector (SPND) is being widely used to monitor the reactor core of the nuclear power plants. The SPND contains a neutron-sensitive metallic emitter surrounded by a ceramic insulator. Currently, the vanadium (V) SPND has been being developed to be used in OPR1000 nuclear power plants. Some Monte Carlo simulations were accomplished to calculate the initial sensitivity of vanadium emitter material and alumina insulator with a cylindrical geometry. An MCNP code was used to simulate some factors (neutron self-shielding factor and beta escape probability from the emitter) and space charge effect of an insulator necessary to calculate the sensitivity of vanadium detector. The simulation results were compared with some theoretical and experimental values. The method presented here can be used to analyze the optimum design of the vanadium SPND and contribute to the development of TMI (Top-mount In-core Instrumentation) which might be used in the SMART and SMR.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.483-487
• /
• 2022

본 논문에서는 태양에너지 하베스팅을 위한 자가발전 아두이노 시스템을 설계하고 이의 동작을 설명한다. 이를 위해서 아두이노 시스템이 시시각각 변하는 태양에너지의 양을 센싱하고 이에 따라서 active mode와 sleep mode의 동작 시간의 비율을 스스로 조정해서 주어진 태양 빛의 세기에 대해서 최적으로 동작할 수 있는 동작 조건을 스스로 찾아가는 방법을 설명하고 이의 동작을 검증한다. 본 논문에서 개발한 active mode와 sleep mode의 동작 시간의 비율의 자가 조절을 통해서 태양 빛의 세기가 충분히 강할 경우에는 아두이노 시스템이 active mode로 지속적으로 구동되고, 태양광으로부터 전력을 충분히 공급받을 수 없는 경우 sleep mode를 사용하여 전력 소모를 최소화한다. 그 결과 active mode를 지속적으로 구동하는 것에 비해 sleep mode를 사용하는 경우 전력 소모를 최대 81.7% 줄여 에너지 소비를 최소화할 수 있다는 것을 알 수 있다. 또한 빛의 세기가 중간 수준일 때에는 active mode와 sleep mode의 비율을 빛의 세기에 맞게 적정하게 배분하여 동작하게 한다. 본 논문에서 제안한, 스스로 active mode와 sleep mode의 동작 시간 비율을 조절하는 방법은 특히 높은 전력 소비 효율 특성이 필요한 웨어러블 및 바이오-헬스용 자가발전 시스템을 에너지 효율적으로 동작시킬 때에 도움이 될 것으로 생각된다.

• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.263-272
• /
• 2018

Recent developments in the field of energy harvesting technology that convert ambient energy resources into electricity enable the use of self-powered energy systems in wearable and portable electronic devices without the need for additional external power sources. In particular, piezoelectric-effect-based flexible energy harvesters have drawn much attention because they can guarantee power generation from ubiquitous mechanical and vibrational movements. In response to demand for sustainable, permanent, and remote use of real-life personal electronics, many research groups have investigated flexible piezoelectric energy harvesters (f-PEHs) that employ nanoscaled piezoelectric materials such as nanowires, nanoparticles, nanofibers, and nanotubes. In those attempts, they have proven the feasibility of energy harvesting from tiny periodic mechanical deformations and energy utilization of f-PEH in commercial electronic devices. This review paper provides a brief overview of f-PEH devices based on piezoelectric nanomaterials and summarizes the development history, output performance, and applications.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.47-52
• /
• 2015

The transient phenomenon of self-powered energy-harvesting is assessed using a bond-graph method. The bond-graph is an energy-based approach to describing physical-dynamic systems. It shows power flow graphically, which helps us understand the behavior of complicated systems in simple terms. Because energy-harvesting involves conversion of power in mechanical form to the electrical one, the bond-graph is a good tool to analyze this power flow. Although the bond-graph method can be used to calculate the dynamics of combining mechanical and electrical systems simultaneously, it has not been used for harvesting analysis. We demonstrate the usability and versatility of bond-graph for not only steady analysis but also transient analysis of harvesting.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.111-119
• /
• 2014

This paper describes the design and implementation of a electromagnetic energy harvesting mechanism and electronic circuit for autonomous emergency call system. This analysis results show the power output of the proposed harvesting mechanism and circuit up to max power output 5V and it can hold up to 65 msec of the power generation and 10msec of the RF transmission. Based on the these testing results, the implementation of autonomous emergency call device without battery power or any external power source is feasible.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.141-147
• /
• 2017

Mechanical shim is an advanced technology for reactor power and axial offset control with control rod assemblies. To address the adverse accuracy impact on the ex-core power range neutron flux measurements-based axial offset control resulting from the variable positions of control rod assemblies, the lead-lag-compensated in-core self-powered vanadium detector signals are utilized. The prompt ${\gamma}$ current of self-powered detector is ignored normally due to its weakness compared with the delayed ${\beta}$ current, although it promptly reflects the flux change of the core. Based on the features of the prompt ${\gamma}$ current, a method for configuration of the lead-lag dynamic compensator is proposed. The simulations indicate that the method can improve dynamic response significantly with negligible adverse effects on the steady response. The robustness of the design implies that the method is of great value for engineering applications.

• 전자통신동향분석
• /
• 제34권5호
• /
• pp.36-47
• /
• 2019

Smart window technology has become a major component of smart buildings, leading to energy savings and enhanced functionality. Smart windows work like curtains or blind screens, blocking external light sources. Smart window components employ electrochromic or photochromic materials that can selectively block sunlight when electricity is applied. The installation of low-E glass and building-integrated photovoltaics (BIPV) is being encouraged in accordance with the policy on saving building energy. To incorporate BIPV into smart windows, the transparency and colors of transparent photovoltaics must be optimized. The power sources required to operate these smart windows take advantage of the transparent color of the solar cells, which also facilitates aesthetics. Self-powered smart windows that combine electrochromic or photochromic screens with transparent solar cells suggest a promising convergent technology.

• 센서학회지
• /
• 제32권1호
• /
• pp.22-30
• /
• 2023

Innovative and advanced technologies, including robots, augmented reality, virtual reality, the Internet of Things, and wearable medical equipment, have largely emerged as a result of the rapid evolution of modern society. For these applications, pressure monitoring is essential and pressure sensors have attracted considerable interest. To improve the sensor performance, several new designs of pressure sensors have been researched based on resistive, capacitive, piezoelectric, optical, and triboelectric types. In particular, optical pressure sensors have been actively studied owing to their advantages, such as robustness to noise and remote sensing capability. Herein, a review of recent research on optical pressure sensors with self-powered sensing, remote sensing, high spatial resolution, and multimodal sensing capabilities is presented from the viewpoints of design, fabrication, and signal processing.