• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.434-437
• /
• 2003

Evaluation or the patterning accuracy of e-beam lithography machines requires a high precision inspection system that is capable of measuring the true xy-locations of fiducial marks generated by the e-beam machine under test. Fiducial marks are fabricated on a single photo mask over the entire working area in the form of equally spaced two-dimensional grids. In performing the evaluation, the principles of self-calibration enable to determine the deviations of fiducial marks from their nominal xy-locations precisely, not being affected by the motion errors of the inspection system itself. It is. however, the fact that only repeatable motion errors can be eliminated, while random motion errors encountered in probing the locations of fiducial marks are not removed. Even worse, a random error occurring from the measurement of a single mark propagates and affects in determining locations of other marks, which phenomenon in fact limits the ultimate calibration accuracy of e-beam machines. In this paper, we describe an uncertainty analysis that has been made to investigate how random errors affect the final result of self-calibration of e-beam machines when one uses an optical inspection system equipped with high-resolution microscope objectives and a precision xy-stages. The guide of uncertainty analysis recommended by the International Organization for Standardization is faithfully followed along with necessary sensitivity analysis. The uncertainty analysis reveals that among the dominant components of the patterning accuracy of e-beam lithography, the rotationally symmetrical component is most significantly affected by random errors, whose propagation becomes more severe in a cascading manner as the number of fiducial marks increases

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.159-159
• /
• 2004

금속 박막 위의 알칸티올분자의 흡착에 의한 자기조립단분자막(Self-Assembled Monolayers)은 접착 방지, 마찰 저하 등의 기능을 가진 코팅층으로서의 응용과 분자 또는 생분자의 미세 구조물 형성을 위한 방법으로 널리 연구되어지고 있다. 이러한 연구 중에서 특히 자기조립단분자막의 매우 얇은 두께와 금속 박막의 선택적 식각을 위한 안정적인 리지스트(Photo Resist)로서의 특징을 활용한 극미세 패터닝에 대한 연구가 활발히 진행되고 있다.(중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.411-414
• /
• 2005

We have developed a transflective liquid crystal display (LCD) with a single cell gap and a low twisted nematic (LTN) mode in combination with a self-integrated retardation layer. The retardation layer was made of UV curable liquid crystalline material in one step of photo masking process and has both the homeotropic and the planar parts. The proposed transflective configuration has advantages in a simple fabrication process, and the possibility for a single driving scheme due to the similarity between the transmittance and the reflectance.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.286-290
• /
• 2018

We investigated the dependence of the retardation dispersion on the polarization direction of ultraviolet (UV) light during the photopolymerization of self-organized smectic reactive mesogen (RM) molecules. RM retarder film that was photopolymerized with UV light linearly polarized parallel to the layer plane showed negative dispersion (ND) of retardation for a wide range of UV polymerization temperatures. On the other hand, film that was photopolymerized with unpolarized UV light showed negative dispersion in a narrow range of UV polymerization temperatures. With a certain UV polymerization temperature, the dispersion of retardation was converted from positive to negative, depending on the UV polarization.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.114-120
• /
• 2006

Nano-size Au particle doped $TiO_2$ films were prepared with $Ti(OC_3H_7^i)_4$, polyvinylpyrrolidone(PVP), $HAuCl_4$ and $C_3H_7OH$ etc. by sol-gel method. $TiO_2$ gel films were obtained by the dip-coating method on the $SiO_2$ glass substrates, and then heat-treated at $700^{\circ}C$ for 10 min. The thickness of $TiO_2$ films were $0.7\~1.8\;{\mu}m$. It was found that the thickness of films prepared from PVP containing solution was about $2\~8$ times higher values than that of thin films without PVP. The size of Au particles doped in the films were about $350\~750\;nm$. Nano-size Au particle dispersed $TiO_2$ films showed high absorption peak at visible region 450nm, which made them good candidates for non-linear optical materials and photo-catalytic materials. The contact angle of $TiO_2$ film for water was $12.5^{\circ}$, and therefore it is clear that $TiO_2$ films have very high hydrophilic properties and the self-cleaning effects.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.25 no.3
• /
• pp.150-159
• /
• 2012

Objective : The purpose of this study was to evaluate the effect of korean herbal cosmetics for facial skin elasticity. Methods : We recruited patients and divided them to cosmetics group and control group randomly. We provided korean herbal cosmetics to cosmetics group and subjects in cosmetics group applied the provided cosmetics for 4 weeks. Control group waited and applied cosmetics that had previously used for 4 weeks. We assessed all subjects in 0 week, 2 weeks and 4 weeks. Primary assessment instrument was moire topography photo scale. Second assessment instrument was skin moisture, oiliness and elasticity which assessed with skintouch system v1.0, detox/regeneration questionnaire score and self-evaluating facial wrinkle/looseness score. Result : Moire topography photo scale improved in cosmetics group than control group significantly. Skin moisture and elasticity assessed with skintouch system improved in cosmetics group than control group significantly while skin oiliness assessed with skintouch system have not improved significantly. Detox/regeneration questionnaire score and self-evaluating facial wrinkle/looseness score improved in cosmetics group than control group significantly. Conclusion : Korean herbal cosmetics application might be effective method for facial skin elasticity.

• Journal of Information Display
• /
• v.5 no.4
• /
• pp.18-22
• /
• 2004

A carbon nanotube field emission display (CNT FED) panel with a 2 inch diagonal size was fabricated through screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20nm. The sealing temperature of the panel is around 390 $^{\circ}C$ and the vacuum level is obtained with $1.4{\times}10^{-5}$torr at the sealing. The field emission properties of the diode type CNT FED panel are characterized. Currently, we are in the process of developing a triode type CNT FED with a self-aligned gate-emitter structure.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.3
• /
• pp.366-370
• /
• 2006

We investigated the negative differential resistance (NDR) property of self-assembled 4,4-di(ethynylphenyl)-2'-nitro-l-(thioacetyl)benzene ('nitro-benzene'), which has been well known as a conducting molecule [1], Self-assembly monolayers (SAMs) were prepared on Au (111), which had been thermally deposited onto pre-treated $(H_2SO_4: H_2O_2=3:1)$ Si, The Au substrate was exposed to a 1mM solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing of the sample, it was exposed to a $0.1{\mu}M$ solution of nitro-benzene in dimethylformamide (DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. Following the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured the electrical properties of SAMs using ultra high vacuum scanning tunneling microscopy (UHV-STM) and scanning tunneling spectroscopy (STS) [2]. As a result, we confirmed the properties of NDR in between the positive and negative region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1270-1275
• /
• 2004

Standard positive photoresist techniques were adapted to generate nano-scale patterns of gold substrate using self-assembled monolayers (SAMs) and femtosecond laser. SAMs formed by the adsorption of alkanethiols onto gold substrate are employed as very thin photoresists, Alkanethiolates formed by the adsorption of alkanethiols are oxidized on exposure to UV light in the presence of air to alkylsulfonates. Specifically, it is known that deep UV light of wavelength less than 200nm is necessary for oxidation to occur. In this study, ultrafast laser of wavelength 800nm and pulse width 200fs is applied for photolithography. Results show that ultrafast laser of visible range wavelength can replace deep UV laser source for photo patterning using thin organic films. Femtosecond laser coupled near-field scanning optical microscopy facilitates not only the patterning of surface chemical structure, but also the creation of three-dimensional nano-scale structures by combination with suitable etching methods.

• Journal of the Korean housing association
• /
• v.18 no.5
• /
• pp.65-72
• /
• 2007

What is the meaning of home to older people? How much is home significant for older people? How do they express self-identity through decorating their own homes? These are the new subjects that scholars in the West are involved in lately in terms of micro-perspective (George, 1998; Kellett, Gilroy & Jason, 2005; Gilroy & Kellett, 2006). It is evident that home has more significant meaning to older people than other age groups, since the older are more likely to spend greater time within the home through lower income, lessening mobility or loss of companions (Gilroy, 2005). Also the older tend to cling to their homes and attach to possessions than the younger. Older people's possessions are the things that memories of their lives were absorbed. Therefore, possession display can role as a mean of showing their past lives and memories. Gilroy and her colleagues (2005, 2006) found that there was a certain pattern of possession display in English older people's households, and that older people would like to express self-identity through decorating their own homes with their precious possessions. Then, isn't it interesting to find out if there is any pattern of possession display or decoration items in Korean older people's households as well? Thus, the aim of this study is to describe pattern of possession display as a mean of expressing self-identity in Korean older people's households. Interview with older people was used to find out the way and reason of display possessions. Observation method including taking photos and hand-drawings was also added in order to demonstrate detail condition of display items in the house. Possessions display and furniture arrangement in the living room and bedroom were investigated to find out a certain pattern of display and meaning. Research objects were healthy older people aged over 60, who are living independently from their adult children, and who can manage housekeeping by themselves. 32 households were investigated in the area of Seoul, Kyunggi, Chungchungnam, and Kangwon provinces. The findings demonstrate that most precious possession for Korean older people is photo of themselves; especially one taken in their younger age. The reason of it is because the photo reminds them of their heydays when they were vital. Photo of the most beloved one is displayed more frequently in the bedroom than in the living room indicating consistence with English case. As symmetrical display pattern was dominant in case of English older people's households, no dominant display pattern is found in Korean case. Korean older people also cling to their homes and possessions and want to keep their dwelling space as large as what they use now. It is notable that even after they become older and frail, they want sufficient space to display possessions as a mean of self-identity expression. Attachment to possessions and decoration can give older people significant meaning of identity, and it is the reason why architects or interior designers have to meet older people's needs. It needs consideration that residents are allowed to bring their old furniture and precious possessions when they move in elderly housing unit in order to minimize environmental shock, as well as feeling at home. This subject could suggest a clue to designers or architects who have to meet residents' needs in space design of elderly housing or facilities in the future. Psychological well-being of older people can be met by making them feel at home wherever they live. They need space where they can express their own identity and personality even in case when they have to live in a limited small space like elderly housing unit or nursing home.