• 제목/요약/키워드: Self-field loss

검색결과 61건 처리시간 0.03초

인공지능과 자율운용 기술을 이용한 긴급형 이동통신 기지국 자율설정 및 최적화 (Rapid Self-Configuration and Optimization of Mobile Communication Network Base Station using Artificial Intelligent and SON Technology)

  • 김재정;이희준;지승환
    • 한국정보통신학회논문지
    • /
    • 제26권9호
    • /
    • pp.1357-1366
    • /
    • 2022
  • 긴급 상황에 대비하는 재난망이나 전술 이동통신 네트워크는 현장에 적응하여 신속하고 정확하게 구축하는 것이 중요하다. 전통적인 무선통신 시스템을 구성하기 위해서는 셀 플래닝 장비를 통해 기지국의 파라미터를 설정한다. 하지만 셀 플래닝을 위해서는 환경에 대한 정보나 데이터가 사전에 구축되어 있어야 하며, 셀 플래닝에 반영되지 않아 현장에 맞지 않는 파라미터가 사용되면 네트워크 구축 후 문제의 해결 및 성능 향상을 위해서 별도의 최적화가 진행되어야 한다. 이 논문에서는 이동통신 기지국에서의 인공지능(AI)과 자율운용(SON) 기술을 사용한 신속한 이동통신망 구축 및 최적화 방법을 제시한다. 기지국의 위치와 단말의 측정 정보를 이용한 DNN 모델을 통해 경로 손실 예측을 수행하여 지형을 구분하는 CNN 모델을 기지국 파라미터를 자동으로 설정한 후, 운용 중에 수집되는 데이터로 경로 손실 모델을 학습시키며 이를 이용해 Coverage/Capacity 최적화를 지속적으로 수행할 수 있도록 한다.

준설매립토의 유실율 평가방법 정립에 관한 연구 (A Study on the Estimation Method of Loss Ratio in Dredged Fills)

  • 김석열;최효범;박재억;김승욱
    • 한국지반환경공학회 논문집
    • /
    • 제3권1호
    • /
    • pp.67-77
    • /
    • 2002
  • 준설토의 체적변화는 여수토를 통해 물과 함께 빠져나간 토립자의 유실량과 침강되어 새로이 형성된 지반 표면에서의 건조수축과 지반 내에서의 자중압밀에 의한 침하량의 합으로 생각할 수 있다. 그러나 현재까지 체적변화요인과 관련하여 자중압밀과 건조수축에 관한 연구에 비해 토립자의 유실과 관련된 연구는 미미한 실정이다. 따라서 본 연구에서는 준설토의 체적변화요인 중 여수토를 통해 외부로 유실되는 토량을 보다 명확히 규명하기 위해, 준설작업을 실시하기 전의 원지반과 준설토를 투기하여 조성된 매립 지역에서 각각 채취한 시료에 대한 입도분석결과에 Marsal의 수정파쇄율(일본토질공학회, 1990)을 적용하여 유실율을 평가하는 방법을 적용하였고, 이를 검증하기 위하여 기존의 방법을 이용하여 평가한 유실율과 비교 검토해 보았다. 또한 실내모형시험을 실시하여 현장계측 결과와 비교 검토하였으며 마지막으로 준설토를 단계투기법에 의하여 투기했을때 유실율에 미치는 영향을 실내모형시험을 통하여 확인하였다.

  • PDF

연안자망 부이에 어구자동식별 장치 설치방안에 관한 기초적 연구 (A fundamental study on the installation methods of automatic identification buoy on coastal gill net)

  • 허남희;강경범;구명성;김근형;김종범;좌민석;김준택;정주명;김병엽;김석종
    • 수산해양기술연구
    • /
    • 제55권4호
    • /
    • pp.294-302
    • /
    • 2019
  • As a series of fundamental researches on the development of an automatic identification monitoring system for fishing gear. Firstly, the study on the installation method of automated identification buoy for the coastal improvement net fishing net with many loss problems on the west coast was carried out. Secondly, the study was conducted find out how to install an automatic identification buoy for coastal gill net which has the highest loss rate among the fisheries. GPS for fishing was used six times in the coastal waters around Seogwipo city in Jeju Island to determine the developmental status and underwater behavior to conduct a field survey. Next, a questionnaire was administered in parallel on the type of loss and the quantity and location of fishing gear to be developed and the water transmitter. In the field experiment, the data collection was possible from a minimum of 13 hours, ten minutes to a maximum of 20 hours and ten minutes using GPS, identifying the development status and underwater behavior of the coastal gillnet fishing gear. The result of the survey showed that the loss of coastal net fishing gear was in the following order: net (27.3%), full fishing gear (24.2%), buoys, and anchors (18.2%). The causes were active algae (50.0%), fish catches (33.3%) and natural disasters (12.5%). To solve this problem, the installation method is to attach one and two electronic buoys to top of each end of the fishing gear, and one underwater transmitter at both ends of the float line connected to the anchor. By identifying and managing abnormal conditions such as damage or loss of fishing gear due to external factors such as potent algae and cutting of fishing gear, loss of fishing gear can be reduced. If the lost fishing gear is found, it will be efficiently collected.

적층형 초전도 다심 선재 제조 (Fabrication of coated conductor stacked multi-filamentary wire)

  • 윤기수;하홍수;오상수;문승현;김철진
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제14권1호
    • /
    • pp.4-7
    • /
    • 2012
  • Coated conductors have been developed to increase piece length and critical current for electric power applications. Otherwise, Many efforts were carried out to reduce AC loss of coated conductor for AC applications. Twisting and cabling processes are effective to reduce AC loss but, these processes can not be applied for tape shaped coated conductor. It is inevitable to have thin rectangular shape because coated conductor is fabricated by thin film deposition process on metal substrate. In this study, round shape superconducting wire was first fabricated using coated conductors. First of all, Ag coated conductor was used. coated conductor was slitted to several wires with narrow width below 1mm. 12ea slitted wires were parallel stacked on top of another until making up the square cross-section. The bundle of coated conductors was heat treated to stick on each other by diffusion bonding and then copper plated to make round shape wire. Critical current of round wire was measured 185A at 77K, self field.

병원 전 응급간호사의 응급 처치 수행 능력과 영향 요인 (Factors Influencing on Prehospital Emergency Nurses' Activities and Procedures in the Field)

  • 김복자;강경희;임용수
    • 간호행정학회지
    • /
    • 제15권1호
    • /
    • pp.64-71
    • /
    • 2009
  • Purpose: This study shows the prehospital emergency nursing practices, and analyzes them associated with their individual characteristics and job conditions. Method: Based on a survey of the National Emergency Medical Center in Korea(2008), principal components were extracted from 7 prehospital emergency nursing practices by factor analysis, and some regression analyses of principal components(CPR-AED and V/S-I.V.) were executed on individual characteristics and job conditions. Results: The PENs gave themselves higher order ratings for vital sign check, airway management for loss of consciousness patients, CPR for suspicious cardiac arrest, keeping vein open for shock patients, AED for abnormal pulse rate, AED for suspicious cardiac arrest, and AED for loss of consciousness. Age and duty periods were statistically significant influential factors on the CPR-AED component. Conclusion: The results indicate that the PENs were competent in overall prehospital emergency activities and procedures even some weak self-evaluations, and that the standard curriculum and practice standard for prehospital nursing should be developed in order to increase nursing leadership in prehospital emergency settings.

  • PDF

개인회생 채무자의 경제적.심리적 특성에 관한 연구 (A Study on the Demographic, Economic and Psychological Characteristics of the Debtors in Individual Rehabilitation Procedures)

  • 김미라;황덕순
    • 가정과삶의질연구
    • /
    • 제26권5호
    • /
    • pp.109-127
    • /
    • 2008
  • There are few studies on the characteristics of debtors in individual rehabilitation procedures, though research in this field is needed. The scarcity of research means that public policy and perception are being made with inadequate information and, to a certain extent, based on personal prejudices and misconceptions. The purpose of this study was to find out demographic, economic and psychological characteristics of debtors in individual rehabilitation procedures. For this study, an in-depth interview was used. The major findings were as follows : The focus of this study is debtors in individual rehabilitation procedures. They were all under 40 and received relatively high educations. Interestingly, they showed a high tendency to use debt and an inability to manage their money. They had short time horizons and imperfect self-control in consumption and borrowing decisions. Monthly income, expenditures, asset and debt of the debtors, and monthly payment to creditors were reported. There were a lot of reasons for their bankruptcy : business failure, job loss, the cost of raising children, and expenditures for entertainment causing them to file for individual rehabilitation procedures. One of the major conclusions of this study was the discovery that their psychological characteristics were nearly the same. The implications of the study suggest that financial education and counseling must consider psychological characteristics.

금속 폼 압축에 의한 자가 가압 효과 및 PEMFC 성능 개선 (Self-pressurization Effect and PEMFC Performance Improvement Using Metal Foam Compression)

  • 김현우;김준범
    • 공업화학
    • /
    • 제33권6호
    • /
    • pp.618-623
    • /
    • 2022
  • 분리판은 반응물 및 전자를 전달하고 부산물인 물과 열을 배출하며, 막전극접합체의 지지체 역할을 하는 고분자전해질 연료전지의 핵심 구성요소이다. 따라서 분리판의 유로 구조는 연료전지의 성능을 향상시키는데 중요한 역할을 한다. 본 연구에서는 압축률이 다른 구리 폼을 cathode 분리판에 적용한 25 cm2 단위 전지를 이용하여 성능 평가를 수행하였다. 금속 폼의 압축률이 증가할수록 총 저항이 감소하였으며, 특히 전하전달과 물질전달 저항이 사형 유로에 비해 크게 개선되어 중전류밀도 및 고전류밀도 영역에서 전압 손실을 줄일 수 있었다. 가압한 공기를 사용한 사형 유로 구조의 경우 연료전지의 성능이 압축한 금속 폼(S3)을 적용한 유로와 중전류밀도 영역까지는 큰 차이가 없었으나, 고전류밀도 영역에서는 유로 구조의 한계로 낮은 성능을 보였다.

대규모 위상배열용 적응 빔 형성 알고리듬의 성능비교 (Performance comparisons of adaptive beamforming algorithms for a large distorted phased array)

  • 강봉순;박성균
    • 전자공학회논문지S
    • /
    • 제35S권7호
    • /
    • pp.46-52
    • /
    • 1998
  • This paper presents an experimenal proof for criteria of selecting an optimum adaptive beamforming (ABF) algorithm for a large distorted phased array. A single point target embedded in clutter model is suggested to compare four well-known ABF algorithms. These algorithms are tested to low variance and high variance real data for self-calibrating a large distored phased array. It is shown that these algorithms require at least one dominant scatterer with large radar cross section (RCS) or multiple scatterers with moderate RCS in the field of view. Experimental results are provided to demonstrate the comparisons of the four algorithems in terms of gain loss and image correlaion coefficient, along with corresponding reconstructed cross-range images and range-azimuth images.

  • PDF

볏단크기의 변화가 바인더에 의한 수확작업과 탈곡작업에 미치는 영향 (Effect of Rice-Bundle size the harvesting performance with binder and the threshing performance)

  • 김성래;안수봉;김기대
    • Journal of Biosystems Engineering
    • /
    • 제5권1호
    • /
    • pp.51-57
    • /
    • 1980
  • It is desirable to increase the diameter of rice bundle harvested by Japanese reaper binder recently introduced into Korean farmers , since it is too small for stalking in the field for preliminary drying prior to threshing operation which is dominant procedure in rice harvesting . Accordingly, this study was conducted to analyze the effect of the size of rice-bundle on the performance of binder and self-feeding thresher. The results are summarized as follows : 1. The diameter of rice-bundle could be increased from $\phi$80-98 to $\phi$105.0-125.4 while the number of rice bundles per 10 a were reduced to 1200 from 1600. The time required for harvesting 10 a of rice was 81 minutes in small size bundles and 84 minutes in large size bundles and no statistical difference was obtained. 2 .The grain loss due to discharge and cutting were slightly increased with large size bundle compared to the small size but no statistical difference was obtained. The precision of operation and drying rate was not significantly different between small and large size bundles. 3. The unthreshed losses were the same between large and small sizes of rice bundles when self-feeding thresher was used. When 8 PS engine was used , continuous operation was possible for small size bundles , but 1.5seconds of time interval was necessary for large size buldles. 4. The consumption of binding twine was reduced to 603 from 820 meters with the larger bundles , and the labour requirement for stalking rice bundles in the field was also reduced to 1.83 form 2.50 man-hour per 10 a Therefore, harvesting cost can be reduced up to 26.5 percent by increasing the bundle size.

  • PDF

병용계 고유동 자기충전 라이닝콘크리트의 현장 타설에 관한 연구 (Study of The Combined High Flowing Self-Compacting Concrete's Cast in Place)

  • 최욱;박현묘;최연왕;이광명;김기범;윤태정
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.977-980
    • /
    • 2008
  • 최근 터널 라이닝콘크리트의 고질적인 문제점 중에서 유동성 부족 및 충전 불량을 해결하기 위해 자기충전 콘크리트를 적용하고자 하는 연구가 활발하게 진행되고 있다. 본 연구에서는 최근 다년간에 걸친 연구 결과인 개발한 자기충전 라이닝콘크리트(이하 SCLC로 약함)를 타설 전.후의 유동 특성 및 역학적 특성을 검토하여 현장적용 타당성을 검증하고자 하였다. Packing Factor 배합법에 의해 개발된 SCLC를 현장여건과 골재특성에 따라 현장배합으로 변경하여 타설하였으며 타설 전 SCLC의 Slump flow, 공기량 등을 통하여 유동성능과 내구성능을 검토하였다. 또한, 시간경과에 따른 Slump flow loss를 측정하여 현장타설 가능성을 평가하고자 하였다. 나아가 국내 터널 라이닝에 적용된 첫 번째 타설임을 감안하여 차후 자기충전 라이닝콘크리트를 현장 적용할 때 주의해야할 사항 등과 시공방법을 제시하고자 하였다.

  • PDF