• 한국광학회지
• /
• 제14권1호
• /
• pp.97-102
• /
• 2003

이차원 표면 플라즈몬의 공명 흡수와 포토 마스크를 이용하여 11-MUA(11-Mercaptoundecanoic acid)와 11-MUOH(11-Mercaptoundecanol) 둥으로 이루어진 자기조립 단분자막(Self-Assembled Monolayer; SAM)의 다채널 영상을 얻었다. 통상의 Photoresist를 이용한 리토그래피 대신에 Thiol bonding의 광산화를 이용하여 패터닝 과정을 줄이고, 백색광 및 대역통과 필터(λ$_{0}$=633nm)를 이용하여 입사광으로써 레이저를 사용할 때 나타나는 간섭무늬를 줄였다. 이로부터 나타나는 이차원 영상의 명암을 정량적으로 보정하면 수 나노미터(nm) 두께의 변화를 측정할 수 있다. 또한 표면 플라즈몬 공명법은 국소화된 근접장 (소산장)을 이용하는 방법으로서, 통상 많이 이용되는 형광법 등에서 나타나는 광탈색(Photobleaching)이나 소광(Quenching) 현상이 없이 시료의 처리가 간단하고, 영상 신호의 시간에 따른 변화가 극히 적으며, 실시간으로 신호의 변화를 측정할 수 있다는 장점이 있다.

• 폴리머
• /
• 제29권4호
• /
• pp.331-337
• /
• 2005

일반적으로 꼬리부분에 카복실산을 갖는 알칸티올레이트는 바이오 물질의 고정화 활성물질로 사용되고 있다. 본 연구에서는 알칸티올레이트의 전기적 성질과 물리적 안정성을 향상시키기 위해 공액구조를 갖는 방향족계 티올레이트를 사용하여 cytochrome c와 같은 단백질을 고정화시켰다. 방향족계 자기조립 단분자막의 패턴 형성은 다음과 같은 공정으로 행하였다. 4'-Mercapto-biphenyl-4-carboxylic acid와 4-mercapto-[1,1';4',1']terphenyl-4'-carboxylic acid와 같은 방향족 티올레이트 분자를 금 기판에 흡착시킨 다음 네거티브 마스크를 가지고 원자외선 조사에 의해 산화반응을 시킨 후 deioniz water로 현상하였다. 공액계 자기조립 단분자막의 패턴형성과 전기적 성질은 STM과 AFM 측정을 통해 조사하였다. 또한 cytochrome c 또는 ferrocene amide를 패턴이 형성된 금 기판에 고정화시킨 다음 cyclic voltammeoy 측정을 통해 공액계 방향족 티올레이트의 전기적 활성을 검토하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1081-1084
• /
• 2004

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.11-12
• /
• 2010

• 통합자연과학논문집
• /
• 제5권4호
• /
• pp.237-240
• /
• 2012

In this study, PEDOT thin films polymerized with Iron(III)tosylate ($Fe(PTS)_3$) and grown on atomically smooth and highly dense 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM) surfaces by VPP method have been investigated. PEDOT thin films were synthesized on APS self-assembled $SiO_2$ wafer surface at two different concentrations (20 wt% and 40 wt%) and growth time (3 and 30 minutes), and then their sheet resistance were measured and compared. PEDOT thin films grown with 20 wt% $Fe(PTS)_3$ oxidant are highly conductive when compared with the film grown with 40 wt% $Fe(PTS)_3$, as ascertained by the measured sheet resistance values down to 0.06 ${\Omega}/cm$. It clearly suggests that 20 wt% is more effective oxidant concentration for VPP than 40 wt% even though the film grown with 40 wt% oxidant has better quality than the film with 20 wt% $Fe(PTS)_3$ does.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.207-214
• /
• 2002

Nano adhesion between SPM (scanning probe microscope) tips and $DDPO_{4}$ (dodecylphosphoric acid ester) and $ODPO_{4}$ (octadecylphosphoric acid ester) SAM (self-assembled monolayer) was experimentally studied. Tests were performed to measure the nano adhesion and friction in both AFM(atomic force microscope) and LFM(lateral force microscope) modes with the applied normal load. $DDPO_{4}$ and $ODPO_{4}$ SAM were formed on TiMe and TiOx surfaces. TiMe and TiOx were coated on the Si wafer by ion sputtering. Adhesion and friction of $DDPO_{4}$ and $ODPO_{4}$ SAM surfaces were compared with those of OTS (octadecyltrichlorosilane) SAM and DLC surfaces. $DDPO_{4}$ and $ODPO_{4}$ SAM converted the TiMe and TiOx surfaces to be hydrophobic. When the surface was hydrophobic, the adhesion and friction forces were found lower than those of bare surfaces. Work of adhesion was also discussed to explain how the surface was converted into hydrophobic. Results also showed that tribological characteristics of $DDPO_{4}$ and $ODPO_{4}$ had good properties in the adhesion, friction, wetting angle and work of adhesion. $DDPO_{4}$ and $ODPO_{4}$ SAM could be one of the candidates for the bio-MEMS elements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.624-627
• /
• 2003

Microcontact printing (uCP) of alkanethiols on gold was the first representative of soft-lithography processes. This is an attempt to enhance the accuracy of classical to a precision comparable with optical lithography, creating a low-cost, large-area, and high-resolution patterning process. Microcontact printing relies on replication of a pattered PDMS stamp from a master to form an elastic stamp that can be inked with a SAM solution(monolayer -forming ink) using either immersion inking or contact inking. The inked PDMS stamp is then used to print a pattern that selectively protects the gold substrate during the subsequent etch.

• 한국음향학회지
• /
• 제23권1호
• /
• pp.1-7
• /
• 2004

본 연구에서는 항원-항체 결합반응을 통해 액상의 단백질 분자를 감지할 수 있는 SH형 SAW센서를 개발하였다. 측정하고자 하는 항원으로는 anti-Human-immune-globulin (anti-HigG) 단백질을, 이에 대응하는 항체로는 HigG를 채택하였다. 압전 단결정 LiTaO₃를 사용하여 100 MHz로 발진되는 센서를 제작하고, 센서의 지연선 위에 Ti/Au층을 증착하였다. 증착된 Au층 위에 SAM (self assembled monolayer)을 형성시켜서 추가되는 항원의 농도에 의한 센서의 주파수 변화를 측정하였다. 개발된 센서의 최소검출단위는 노이즈 레벨 400 Hz 이하 값에 10.8 ng/ml/Hz의 민감도를 가지며, anti-HigG 항원의 질량하중 효과에 대해 안정적인 반응을 보였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.1-7
• /
• 2013

In this paper, a biosensor based on a gated lateral bipolar junction transistor (BJT) is proposed. The gated lateral BJT can function as both a metal-oxide-semiconductor field-effect transistor (MOSFET) and a BJT. By using the self-assembled monolayer (SAM) method, the C-reactive protein antibodies were immobilized on the floating gate of the device as the sensing membrane. Through the experiments, the characteristics of the biosensor were analyzed in this study. According to the results, it is indicated that the gated lateral BJT device can be successfully applied as a biosensor. Additionally, we found that the sensitivity of the gated lateral BJT can be varied by adjusting the emitter (source) bias.

• 통합자연과학논문집
• /
• 제6권4호
• /
• pp.211-214
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that HF treatment is not desirable for the synthesis of a high quality PEDOT thin film via vapor phase polymerization method. Rather, sole treatment with plasma noticeably improved the quality of APS-SAM on glass surface. As a result, a highly dense and smooth PEDOT thin film was grown on uniform oxidant film-coated APS monolayer surface.