• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.410-415
• /
• 2005

Recent measurements of local-area and wide-area traffic have shown that network traffic exhibits at a wide range of scales - Self-similarity. Self-similarity is expressed by long term dependency, this is contradictory concept with Poisson model that have relativity short term dependency. Therefore, first of all for design and dimensioning of next generation communication network, traffic model that are reflected burstness and self-similarity is required. Here self-similarity can be characterized by Hurst parameter. In this paper, when different many data traffic being integrated under various environments is arrived to communication network, Hurst Parameter's change is analyzed and compared with simulation results.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.93-100
• /
• 2001

The analysis and control of a new type unsymmetrical slotted self-bearing step motor for small angle control is presented. The motor actuator is used for both motor and bearing functionality without any additional coil windings or electromagnets for bearing functionality. A circular-arc, straight-line permeance model for the fringing effect is presented. An unsymmetrical slotted self-bearing step motor layout and control algorithm are described. A new control current generation method using the electromagnets layout geometry, which needs no additional current for bearing functionality, is proposed. As the result of this analysis the fringing effect largely influences on the system characteristics. especially in torque. Even if the bearing functionality is added into the motor functionality, it is shown that the magnitude of torque is not changed.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.77-81
• /
• 1999

Tobacco plants(Nicotiana tabacum cv. NC82) transformed with TMV CP cDNA were self-fertilized until 8th generation (R$_{8}$), and the transgenic plants from 6th to 8th generation were analized for their resistance to tobacco mosaic virus(TMV) and stability of the gene expression. The 6th generation of the plants(R$_{6}$) showed high resistance(81-91 %) to TMV at eight weeks after artificial inoculation with the virus. The transgenic cell line 601 was the most prominant in the expression of resistance. 98 % of the plants showed no symptom without any agronomic phynotepe variation when they were inoculated with the virus in a experimental field. However, 2% of the plants were revealed as delay type of symptom with mild mosaic on a few leaves. The viral resistance in greenhouse tests of the 7th generation (R$_{7}$) was 54-64%, and the number of delay type plants were increased than that of 6th generation plants. In the 8th generation, 81 % of the plants was complete resistant to the virus. The TMV CP cDNA of the transgenic plants of each generation was also confirmed by genomic PCR, and there was no systemic viral multiplication in the resistant plants. It suggests that the viral resistance and gene expression of the transgenic plants might be stable through the generations.ons.s.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.193-195
• /
• 2002

In this paper, a communication module is proposed to be applied to communication between over current relay (OCR) agents in multi agent protection system. A multi agent system can achieve a global goal beyond the ability of each individual agent by working together, in which it is the prerequisite for each agent to be able to exchange or share information or processing status with other agent. The proposed communication module is purposed to enable not only each agent to bring about its own goal, but also the whole protective system to provide much improved coordinated protection. It is applied to a self adaptive protection system for a distribution network using multi agent concept to show its effectiveness.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.358-363
• /
• 2013

Due to recent changes in increased life expectancy, economic power and social development, the new senior generation (focusing on people in their fifties) represents a new market power with strong competitiveness. The new senior generation is the generation after the baby boomers, with characteristics that include a high-level of education, increased income, a high-level of consumption, increased assets, self-fulfillment desires and individuality. Demands in the senior fashion industry are expected to gradually increase and the underwear industry that targets the new senior generation is expected to grow rapidly. These demands will require product development for the new senior generation based on emotional and socio-cultural characteristics. The current new senior underwear market is under the process of R&D with a focus on body shape changes; however, there are limited studies on emotional and socio-cultural approaches. This study formulates a basic design plan for different age groups based on an analysis of the situation of bra wear (current inconveniences, demand and needs) by women in their fifties and over. Subsequently, a functional active bra top that considers activity and comfort was proposed for women in their fifties, an all-in-one foundation bra top that shapes the body was proposed for women in their sixties, and comfort bra tops that are comfortable and easy to put on and take off were proposed for women in their seventies and over.

• Journal of the Korean Society of Combustion
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2015

A study on laminar jet flames in coflow air diluted with helium has been conducted to investigate self-excitations for various propane mole fractions and nozzle exit velocities. The stability map was represented as a function of nozzle exit velocity and fuel mole fraction for propane. The results show that two types of self-excitation were observed : (1) buoyancy-driven self-excitation (hereafter called BDSE) and (2) Lewis-number induced-self-excitation coupled with (1) (hereafter called LCB) near extinction limit for 9.4 mm nozzle diameter. It was shown that with 0.95 mm nozzle diameter, Lewis-number-induced self-excitation (hereafter LISE) and BDSE could be separated. The differences between the two self-excitations were shown and discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.24-25
• /
• 2011

Molecular self-assembly has several advantages over other nanofabrication methods. Molecular building blocks ensure ultrafine pattern precision, parallel structure formation allows for mass production and a variety of three-dimensional structures are available for fabricating complex structures. Nevertheless, the molecular interaction for self-assembly generally relies on weak forces such as van der Waals force, hydrogen bonding, or hydrophobic interaction. Due to the weak interaction, the structure formation is usually slow and the degree of ordering is low in a self-assembled structure. To promote self-assembly, directed assembly methods employing prepatterned substrates or external fields have been developed and gathered a great deal of technological attention as a next generation nanofabrication process. In this presentation a variety of directed assembly methods for soft nanomaterials including block copolymers, peptides and carbon nanomaterials will be introduced. Block copolymers are representative self-assembling materials extensively utilized in nanofabrication. In contrast to colloid assembly or anodized metal oxides, various shapes of nanostructures, including lines or interconnected networks, can be generated with a precise tunability over their shape and size. Applying prepatterned substrates$^{1,2}$ or introducing thickness modulation$^3$ to block copolymer thin films allowed for the control over the orientational and positional orderings of self-assembled structures. The nanofabrication processes for metals, semiconductors$^4$, carbon nanotubes$^{5,6}$, and graphene$^{6,7}$ templating block copolymer self-assembly will be presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3427-3435
• /
• 2012

Beginning with retirement in 2010 of the leading group of baby boomer generation born in 1955, baby boomers are starting to retire from work in full-scale. Since retirement of baby boomers refers to increase in the senior class with longer life expectancies caused by development of medical technologies, enhancement of living standards, and improvement of surrounding environments, annually decreasing birthrate is further accelerating entry of our society into an aged society. Accordingly to examine baby boomer generation's preparation for retirement in relation to career self-efficacy, first, difference in retirement preparation according to mean monthly income and current occupation was analyzed. Second, the effect of career self-efficacy on retirement preparation was studied. The survey for this study was conducted for one month between January 17 and February 16, 2012 in Seoul, Gyeonggi, Gangwon, Chungnam, Gyeongnam, Jeonnam, and Jeju. 500 surveys were distributed to baby boomer generations through direct visit and mail, among which 443 responses were returned. 400 effective responses were selected as subjects of the study. As a result, preparation for retirement according to mean monthly income was verified to be significant in terms of economic and physical factors. Significant results were shown in all factors including economic, physical and social factors for retirement preparation according to current occupation. Career self-efficacy had greatest influence of 58% on retirement preparation with economic factors. It also influenced all factors including self assessment, objective setting, occupational information, and problem solving.

• Journal of Families and Better Life
• /
• v.16 no.2
• /
• pp.179-193
• /
• 1998

the purpose of this research was to investigate rewards costs and adjustment perceived by adult children in three generation family. Data were collected from 132 marital couples in three generation family in Seoul area. The results of this study showed that there were significant differences in the levels of rewards costs and adjustment variables (self-esteem depression family life satisfaction and marital satisfaction)between husbands are wives. It was also found that wives's costs and husbands' rewards were significantly different across three different types of three generation family. It addition the results of multiple regression analyses indicated that reward was the most powerful variable affecting wives' depression and family life satisfaction and that cost influenced husbands' family life satisfaction and marital satisfaction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2932-2943
• /
• 1994

An efficient approach to the automatic construction of effective quadrilateral finite element meshes for two-dimensional analysis is presented. The procedure is composed of, firstly, an initial mesh generation and, secondly, an h-version of adaptive refinement based on error analysis. As for an initial mesh generation scheme, a modified looping algorithm has been employed. For the adaptive refinement process, an error indicator obtained by computing the residual error of the equilibrium equations in the energy norm with a relaxation factor has been employed. Examples of mesh generation and self-adaptive mesh improvements are given. These example solutions demonstrate that an effective mesh for a given error tolerance can be obtained in a few steps of the analysis processes.