• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.882-884
• /
• 2002

The transient voltage characteristics of capacitor self-exited induction generator are analyzed by the state equation which is obtained from the d-q axis equivalent circuit of stationary reference frame and torque equation. The d-q equivalent circuit is composed using the condition of stationary reference frame. The mutual inductance is only considered as a function of magnetizing current in the equivalent circuit. The characteristics are analyzed and discussed by the backward Euler method for various load conditions under specified initial conditions and input.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.319-322
• /
• 1990

Self-controlled permanent magnet synchronous motor (PMSM) has similar operating characteristics as seperately excited dc motor. It is favored in servo applications due to its improvement of efficiency and maintenance. This paper presents completely digitalized controller using microprocessor and voltage fed inverter. The speed control system for PMSM is implemented. To control the motor speed, the control system regulates the magnitude of Inverter output voltage by regular-sampled PWM method to generate sinusoidal PWM wave with microprocessor. And to keep the range of inverter switching frequency, it varies the number of pulse train according to the speed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1987.11a
• /
• pp.75-78
• /
• 1987

저어널베어링으로 지지되고 있는 축 및 베어링 시스템에서 축이 고속으로 회전할 때, 어느 회전수 이상에서 시스템의 안정성이 깨어져 축의 진동진폭이 갑자기 커지는 Self-excited whirl이라 불리우는 불안정 현상이 존재한다. 따라서 고속회전체에 적용되는 공기윤활 저어널베어링에 있어서 안정성 문제는 설계 및 운전에 고려되어야 하는 지배적 요인 중의 하나가 된다. Lund, Fleming과 Cunningham, Mori 들은 외부가압형 공기윤활 저어널베어링의 안정성을 이론적으로 해석하였으며 Pincus는 Self-acting형 공기베어링에서 편심율이 작은 경우 2-Lobe 베어링이나 3-Lobe 베어링이 원형베어링보다 강성도와 감쇠력이 더 크므로 안정성이 더 좋을 것이라고 정성적으로 예측했다. 그러나 외부가압 공기윤활 저어널베어링의 안정성에 비원형 베어링의 유효성은 김 두환, 김 금모, 박 종포 등에 의하여 실험적으로 제시되었다. 따라서 본 연구는 외부가압형 공기윤활 저어널베어링에서 Multi-lobe 형상의 베어링이 축 및 베어링 스스템의 안정성에 미치는 효과를 원형의 경우와 비교하여 이론적으로 해석하여 Multi-lobe베어링의 유효성을 보이고 이에 적용 가능한 Programing을 하여 몇가지 경우에 대하여 계산을 하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.331.1-331
• /
• 2002

Four degrees of freedom mathematical model is presented to describe the fundamental mechanisms of the disc brake squeal noise. A contact parameter is introduced to describe the coupling between the in-plane and the out-of-plane motions. The friction coeficient including "relative velocity" and ′normal force" can be generally formulated as the form of multiplication with polynominal parameters(${\beta}$, ${\gamma}$). (omitted)

• The Journal of Korean Academic Society of Nursing Education
• /
• v.16 no.2
• /
• pp.202-212
• /
• 2010

Purpose: The purpose of this study was to identify the effectiveness of the JigsawⅣ cooperative learning in a facilitative communication class of nursing students. Achievement, communication skill, self-directed learning and experience during the class were measured. Method: This study was a pretest and posttest design with two subject groups. 43 students were in experimental (JigsawⅣ) group and 47 ones were in control (general small discussion) group. Classes were conducted over a 6-week period. The collected data was analyzed by the SPSS 12.0 program. Result: After taking part in the educational program, the experimental group had significantly more improvement in communication skill (F=6.81, p=.002) and self-directed learning (F=11.81, p=.000). In addition, the experimental group showed significantly higher scores for concentration in the class (t=2.26, p=.27), positive emotional state (t=3.01, p=.003) and active participation (t=2.78, p=.007) compared to the control group. However, the achievement between the two groups was not significantly different (F=3.29, p=.073). Conclusion: The findings of this study show that JigsawⅣ cooperative learning has positive effects in improvement of communication skill and self-directed learning. Also, students were excited and interested in the class during cooperative learning. Based on these findings, the author suggests developing additional educational programs focusing on nursing students.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.65-73
• /
• 2003

An experimental study on flame lift-off characteristics of propane jet flame highly diluted with nitrogen has been conducted introducing acoustic forcing with a tube resonant frequency. A flame stability curve is attained according to forcing strength and nozzle exit velocity for $N_2$ diluted flames. Flame lift-off behavior with forcing strength and nozzle exit velocity is globally categorized into three; a well premixed behavior caused by a collapsible mixing for large forcing strength, a coexistent behavior of well-premixed and edge flames interacting with well-organized inner fuel vortices for moderate forcing strengths, and edge flame behavior for small forcing strengths. Special focus is concentrated on the coexistent behavior of the flame base in lifted flame since this may give a hint to a possibility which the flame base behaves like a well-mixed premixed flame in highly turbulent lifted flames. It is also shown that the acoustic forcing to self-pulsating laminar lifted flame affects flame lift-off behavior considerably which is closely related to downstream flow velocity, mixture strength, effective fuel Lewis number, and flame stretch.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.255-261
• /
• 2002

A four-degree of freedom model is suggested to understand the basic dynamical behaviors of the normal interaction between two masses of the friction induced normal vibration system. The two masses may be considered as the pad and the disk of the brake. The phase space analysis is performed to understand complicated in-plane dynamics of the non-linear model. Attractors in the phase space are examined for various conditions of the parameters. In certain conditions, the attractor becomes a limit cycle showing the stick-slip phenomena. In this paper, on the basis of the in-plane motion not only the existence of the limit cycle but also the size of the limit cycle is examined o demonstrate the non-linear dynamics that leads the unstable state and then the normal vibration is investigated as the state of the in-plane motion For only one case of the system frequency(two masses with same natural frequencies), the propensity of the normal vibration is discussed in detail. The results show an important fact that it may be not effective when too much damping is present in the only one part of the masses.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.89-96
• /
• 2002

A two-degree of freedom model is suggested to understand the basic dynamical behaviors of the interaction between two masses of the friction induced vibration system. The two masses may be considered as the pad and the disk of the brake, The phase space analysis is performed to understand complicated dynamics of the non-linear model. Attractors in the phase space are examined for various conditions of the parameters of the model especially by emphasizing on the damping parameters. In certain conditions, the attractor becomes a limit cycle showing the stick-slip phenomena. In this paper, not only the existence of the limit cycle but also the size of the limit cycle is examined to demonstrate the non-linear dynamics that leads the unstable state. For the two different cases of the system frequency ((1)two masses with same natural frequencies, (2) with different natural frequencies), the propensity of limit cycle is discussed in detail. The results show an important fact that it may make the system worse when too much damping is present in the only one part of the masses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.183-189
• /
• 2020

This paper presents an experimental investigation regarding the sensitivity of electrical impedance of a steel wire to tensile stress, ambient temperature and induced frequency. For various stress levels and temperatures, the electrical impedance of a steel wire has been measured on a self-sensing system. The three experimental cases are carried out at various temperature conditions, stress levels and applied frequencies. If the temperature increases and stress level decreases at a given frequency, the electrical impedance on the steel wire increases. The results show that the correlation between electrical impedance and temperature is a linear relationship at all stress levels. It is noted that the sensitivity of impedance to temperature is much higher than the stress.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.7
• /
• pp.502-509
• /
• 2002

A two-degree of freedom model Is suggested to understand the basic dynamical behaviors of the interaction between two masses of the friction induced vibration system. The two masses may be considered as the pad and the dusk of the brake. The phase space analysis is performed to understand complicated dynamics of the non-linear model. Attractors in the phase space are examined for various conditions of the parameters of the model especially by emphasizing on the damping parameters. In certain conditions, the attractor becomes a limit cycle showing the stick-slip phenomena. In this Paper, not only titre existence of the limit cycle but also the sloe of the limit cycle is examined to demonstrate the non-linear dynamics that leads the unstable state. For the two different cases of the system frequency[(1) Two masses with same natural frequencies, (2) with different natural frequencies] . the propensity of limit cycle Is discussed In detail. The results show an important fact that it may make the system worse when too much damping Is present in the only one part of the masses.