• 한국전자파학회논문지
• /
• 제24권12호
• /
• pp.1167-1172
• /
• 2013

본 논문에서는 하나의 트랜지스터로 발진과 주파수 혼합이 동시에 이루어지는 self-oscillating-mixer(SOM) 방식을 적용하여 높은 변환 이득을 갖는 X-band 도플러 레이더를 설계하였다. SOM의 위상 잡음 특성을 향상시키기 위하여 ${\lambda}/2$ slotted square patch resonator(SSPR) 공진기를 제안하였으며, 동일 주파수에서 기존 공진기에 비해 50 %의 면적 감소와 175.4의 높은 Q값을 이루었다. 제작된 SOM은 저 전력 시스템을 구현하기 위해 1.7 V의 낮은 바이어스 전압을 인가해 주었으며, 높은 변환 이득을 위하여 트랜지스터의 pinch-off voltage 근처를 동작점으로 설정하였고, 변환 이득이 최대가 되도록 최적화 하였다. 제안된 SOM의 출력 파워는 10.65 GHz에서 -3.16 dBm으로 측정되었으며, DC Power consumption은 7.65 mW로 상대적으로 작은 전력을 소모한다. 또한, 9.48 dB의 높은 변환 이득 특성과 100 kHz offset에서 -90.91 dBc/Hz의 위상 잡음 특성을 나타내며, 이때 성능지수(FOM)는 -181.8 dBc/Hz 으로 다른 SOM에 비해 7 dB 이상 개선되었다.

• 전자공학회논문지SC
• /
• 제40권1호
• /
• pp.19-29
• /
• 2003

본 논문에서는 기존의 방법과는 달리 4 단계의 보정 기법을 적용하여 미세한 적외선 (infrared : IR) 신호를 검출해내는 비냉각 적외선 센서 어레이를 위한 CMOS 신호 검출회로를 제안한다. 제안하는 신호 검출회로는 11 비트의 A/D 변환기 (analog-to digital converter : ADC)와 7 비트의 D/A 변환기(digital to-analog converter : DAC), 그리고 자동 이득 조절 회로 (automatic gain control circuit : AGC)로 구성되며, 비냉각 센서 어레이를 동작시키는 DC 바이어스 전류 성분, 화소간의 특성 차이에 의한 변화 성분과 자체 발열 (self-heating)에 의한 변화 성분을 포함하는 적외선 센서 어레이의 출력 신호로부터 미세한 적외선 신호 성분만을 선택적으로 얻어낸다. 제안하는 A/D 변환기에서는 병합 캐패시터 스위칭(merged-capacitor switching : MCS) 기법을 적용하여 면적 및 전력 소모를 최소화하였으며, D/A 변환기에서는 출력단에 높은 선형성을 가지는 전류 반복기를 사용하여 화소간의 특성 차이에 의한 변화 성분과 자체 발열에 의한 변화 성분을 보정할 수 있도록 하였다. 시제품으로 제작된 신호 검출회로는 1.2 um double-poly double-metal CMOS 공정을 사용하였으며, 4.5 V 전원전압에서 110 ㎽의 전력을 소모한다. 제작된 시제품으로부터 측정된 검출회로의 differential nonlinearity (DNL)와 integral nonlinearity (INL)는 A/D 변환기의 경우 11 비트의 해상도에서 ±0.9 LSB와 ±1.8 LSB이며, D/A 변환기의 경우 7비트의 해상도에서 ±0.1 LSB와 ±0.1 LSB이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.100-101
• /
• 2012

The plasma damage free and room temperature processedthin film deposition technology is essential for realization of various next generation organic microelectronic devices such as flexible AMOLED display, flexible OLED lighting, and organic photovoltaic cells because characteristics of fragile organic materials in the plasma process and low glass transition temperatures (Tg) of polymer substrate. In case of directly deposition of metal oxide thin films (including transparent conductive oxide (TCO) and amorphous oxide semiconductor (AOS)) on the organic layers, plasma damages against to the organic materials is fatal. This damage is believed to be originated mainly from high energy energetic particles during the sputtering process such as negative oxygen ions, reflected neutrals by reflection of plasma background gas at the target surface, sputtered atoms, bulk plasma ions, and secondary electrons. To solve this problem, we developed the NBAS (Neutral Beam Assisted Sputtering) process as a plasma damage free and room temperature processed sputtering technology. As a result, electro-optical properties of NBAS processed ITO thin film showed resistivity of $4.0{\times}10^{-4}{\Omega}{\cdot}m$ and high transmittance (>90% at 550 nm) with nano- crystalline structure at room temperature process. Furthermore, in the experiment result of directly deposition of TCO top anode on the inverted structure OLED cell, it is verified that NBAS TCO deposition process does not damages to the underlying organic layers. In case of deposition of transparent conductive oxide (TCO) thin film on the plastic polymer substrate, the room temperature processed sputtering coating of high quality TCO thin film is required. During the sputtering process with higher density plasma, the energetic particles contribute self supplying of activation & crystallization energy without any additional heating and post-annealing and forminga high quality TCO thin film. However, negative oxygen ions which generated from sputteringtarget surface by electron attachment are accelerated to high energy by induced cathode self-bias. Thus the high energy negative oxygen ions can lead to critical physical bombardment damages to forming oxide thin film and this effect does not recover in room temperature process without post thermal annealing. To salve the inherent limitation of plasma sputtering, we have been developed the Magnetic Field Shielded Sputtering (MFSS) process as the high quality oxide thin film deposition process at room temperature. The MFSS process is effectively eliminate or suppress the negative oxygen ions bombardment damage by the plasma limiter which composed permanent magnet array. As a result, electro-optical properties of MFSS processed ITO thin film (resistivity $3.9{\times}10^{-4}{\Omega}{\cdot}cm$, transmittance 95% at 550 nm) have approachedthose of a high temperature DC magnetron sputtering (DMS) ITO thin film were. Also, AOS (a-IGZO) TFTs fabricated by MFSS process without higher temperature post annealing showed very comparable electrical performance with those by DMS process with $400^{\circ}C$ post annealing. They are important to note that the bombardment of a negative oxygen ion which is accelerated by dc self-bias during rf sputtering could degrade the electrical performance of ITO electrodes and a-IGZO TFTs. Finally, we found that reduction of damage from the high energy negative oxygen ions bombardment drives improvement of crystalline structure in the ITO thin film and suppression of the sub-gab states in a-IGZO semiconductor thin film. For realization of organic flexible electronic devices based on plastic substrates, gas barrier coatings are required to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency flexible AMOLEDs needs an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}gm^{-2}day^{-1}$. The key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required (under ${\sim}10^{-6}gm^{-2}day^{-1}$) is the suppression of nano-sized defect sites and gas diffusion pathways among the grain boundaries. For formation of high quality single inorganic gas barrier layer, we developed high density nano-structured Al2O3 single gas barrier layer usinga NBAS process. The NBAS process can continuously change crystalline structures from an amorphous phase to a nano- crystalline phase with various grain sizes in a single inorganic thin film. As a result, the water vapor transmission rates (WVTR) of the NBAS processed $Al_2O_3$ gas barrier film have improved order of magnitude compared with that of conventional $Al_2O_3$ layers made by the RF magnetron sputteringprocess under the same sputtering conditions; the WVTR of the NBAS processed $Al_2O_3$ gas barrier film was about $5{\times}10^{-6}g/m^2/day$ by just single layer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1446-1449
• /
• 1996

Thin films of diamond-like carbon(DLC) have been deposited using a magnetron plasma-enhanced chemical vapor deposition(PECVD) method with an rf(13.56 MHz) plasma of $C_{3}H_{8}$. From the Langmuir probe I-V characteristics, it can be observed that increasing the magnetic field yields an increase of the temperature($T_e$) and density($N_e$) of electron. At a magnetic field of 82 Gauss, the estimated values of $T_e$ and $N_e$ are approximately $1.5\;{\times}\;10^5$ K(13.5 eV) and $1.3\;{\times}\;10^{11}\;cm^{-3}$, respectively. Such a highly dense plasma can be attributed to the enhanced ionization caused by the cyclotron motion of electrons in the presence of a magnetic field. On the other hand, the negative dc self-bias voltage($-V_{sb}$) decreases with an increasing magnetic field, which is irrespective of gas pressure in the range of $1{\sim}7$ mTorr. This result is well explained by a theoretical model considering the variation of $T_e$. Deposition rates of DLC films increases with a magnetic field. This may be due to the increased mean free path of electrons in the magnetron plasma. Structures of DLC films are examined by using various techniques such as FTIR and Raman spectroscopy. Most of hydrocarbon bonds in DLC films prepared consist of $sp^3$ tetrahedral bonds. Increasing the rf power leads to an enhancement of cross-linking of carbon atoms in DLC films. At approximately 140 W, the maximum film density obtained is about 2.4 $g/cm^3$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.285-285
• /
• 2011

EUVL (Extreme Ultra Violet Lithography) is one of competitive lithographic technologies for sub-30nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance since the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.