• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.263-270
• /
• 1998

Surface Plasmon Resonance (SPR) sensor system, has rapid response and high sensitivity, can be applicable for detecting reaction times of many biospecific interactions. A SPR sensor system was constructed to detect the antigen-antibody reactions of salmonella and hIgG (human immunoglobulin G). Sensor chips made of gold thin film were used for detecting biological bindings of antigen and antibody reactions. The antigen and antibody reactions for salmonella and hIgG were carried out with various time intervals to observed characteristics of these reactions using SPR sensor system. The resonance angle shift changes were clearly observed at the time of salmonella or hIgG antibody injection into sample cell since each antibody was self-assembled on gold chip surface of the sensor. It was found that the antibodies of salmonella and hIgG reacted with its sensor chip surface in 10 minutes and 60 minutes respectively. And the antigens of both salmonella and hIgG were bound to its antibody within 1 minute.

• Molecules and Cells
• /
• v.41 no.12
• /
• pp.1016-1023
• /
• 2018

Regenerative orthopedics needs significant devices to transplant human stem cells into damaged tissue and encourage automatic growth into replacements suitable for the human skeleton. Soft biomaterials have similarities in mechanical, structural and architectural properties to natural extracellular matrix (ECM), but often lack essential ECM molecules and signals. Here we engineer mineralized polysaccharide beads to transform MSCs into osteogenic cells and osteoid tissue for transplantation. Bone morphogenic proteins (BMP-2) and indispensable ECM proteins both directed differentiation inside alginate beads. Laminin and collagen IV basement membrane matrix proteins fixed and organized MSCs onto the alginate matrix, and BMP-2 drove differentiation, osteoid tissue self-assembly, and small-scale mineralization. Augmentation of alginate is necessary, and we showed that a few rationally selected small proteins from the basement membrane (BM) compartment of the ECM were sufficient to up-regulate cell expression of Runx-2 and osteocalcin for osteoid formation, resulting in Alizarin red-positive mineral nodules. More significantly, nested BMP-2 and BM beads added to a non-union skull defect, self-generated osteoid expressing osteopontin (OPN) and osteocalcin (OCN) in a chain along the defect, at only four weeks, establishing a framework for complete regeneration expected in 6 and 12 weeks. Alginate beads are beneficial surgical devices for transplanting therapeutic cells in programmed (by the ECM components and alginate-chitosan properties) reaction environments ideal for promoting bone tissue.

• The Korean Society of Law and Medicine
• /
• v.21 no.2
• /
• pp.105-162
• /
• 2020

In the pandemic of infectious disease, restrictions of individual liberty have been justified in the name of public health and public interest. In March 2020, the National Assembly of the Republic of Korea passed the revised bill of the 「Infectious Disease Control and Prevention Act.」 The revised bill newly established the legal basis for forced testing and disclosure of the information of confirmed cases, and also raised the penalties for violation of self-isolation and treatment refusal. This paper examines whether and how these individual liberty limiting clauses be justified, and if so on what ethical and philosophical grounds. The authors propose the theories of the philosophy of law related to the justifiability of liberty-limiting measures by the state and conceptualized the dual-aspect of applying the liberty-limiting principle to the infected patient. In COVID-19 pandemic crisis, the infected person became the 'Patient as Victim and Vector (PVV)' that posits itself on the overlapping area of 'harm to self' and 'harm to others.' In order to apply the liberty-limiting principle proposed by Joel Feinberg to a pandemic with uncertainties, it is necessary to extend the harm principle from 'harm' to 'risk'. Under the crisis with many uncertainties like COVID-19 pandemic, this shift from 'harm' to 'risk' justifies the state's preemptive limitation on individual liberty based on the precautionary principle. This, at the same time, raises concerns of overcriminalization, i.e., too much limitation of individual liberty without sufficient grounds. In this article, we aim to propose principles regarding how to balance between the precautionary principle for preemptive restrictions of liberty and the concerns of overcriminalization. Public health crisis such as the COVID-19 pandemic requires a population approach where the 'population' rather than an 'individual' works as a unit of analysis. We propose the second expansion of the harm principle to be applied to 'population' in order to deal with the public interest and public health. The new concept 'risk to population,' derived from the two arguments stated above, should be introduced to explain the public health crisis like COVID-19 pandemic. We theorize 'the extended harm principle' to include the 'risk to population' as a third liberty-limiting principle following 'harm to others' and 'harm to self.' Lastly, we examine whether the restriction of liberty of the revised 「Infectious Disease Control and Prevention Act」 can be justified under the extended harm principle. First, we conclude that forced isolation of the infected patient could be justified in a pandemic situation by satisfying the 'risk to the population.' Secondly, the forced examination of COVID-19 does not violate the extended harm principle either, based on the high infectivity of asymptomatic infected people to others. Thirdly, however, the provision of forced treatment can not be justified, not only under the traditional harm principle but also under the extended harm principle. Therefore it is necessary to include additional clauses in the provision in order to justify the punishment of treatment refusal even in a pandemic.

• The Korean Society of Law and Medicine
• /
• v.20 no.2
• /
• pp.3-39
• /
• 2019

Even after the Constitutional Court decided on August 23, 2012 that the provisions of abortion were constitutional, discussions on the abolition of abortion continued. The controversy about abortion is not only happening recently, but it has already existed since the time when the Penal Code was enacted, and it shares the history of modern legislation with the Republic of Korea. Legislators whom submitted amendment while insisting upon the eradication of abortion in the process of enacting criminal law at that time, presented social and economic adaptation reasons as the core reason. From then on, the abolition of abortion has been discussed during the development dictatorship, but this was not intended to guarantee women's human rights, but it was closely connected to the national policy projects of "Contraception" and "Family Planning" of the Park's dictatorship. Since then, the enactment of the Mother and Child Health Law, which restrictively allow artificial abortion, was held on February 8, 1973, in an emergency cabinet meeting that replaced the legislative power after the National Assembly was disbanded. It became effected May 10th. The reason behind the Mother and Child Health Law that included legalization of abortion in part was that the Revitalizing Reform at that time did not allow any opinion, so it seem to be it was difficult for the religious to express opposition. The "Maternal and Child Health Law" enacted in this way has been maintained through several amendments. It can be seen that the question of maintenance of abortion has been running on parallel lines without any significant difference from the time when the Penal Code was enacted. On August 23, 2012, the Constitutional Court decided that the Constitutional Opinion and the unonstitutional Opinion were 4: 4. However, it was decided by the Constitution without satisfying the quorum for unconstitutional decision of the Constitutional Court. This argument about abolition of abortion is settled for the the time being with the decision of the constitutional inconsistency of the Constitutional Court, and now, the National Assembly bears the issue of new legislation. In other words, the improved legislation must be executed until December 31, 2020, and if the previous improved legislation is not implemented, the crime of abortion (Article 269, Paragraph 1, Article 270 of the Criminal Code) Article 1 (1) will cease to be effective from 1 January 2021. Therefore, in the following, we will look into the reason of the Constitutional Court's constitutional discordance adjudication on criminal abortion(II), and how it structurally differs from the previous Constitutional Court and the Supreme Court. After considering key issues arised from the constitutional discordance adjudication(III), the legislative direction and within the scope of legislative discretion in accordance with the criteria presented by the Constitutional Court We reviewed the proposed revisions to the Penal Code and the Mather and Child Health Act of Korea(IV).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.15-19
• /
• 2007

This paper reports the effects of Ar ion beam surface treatment on a $SiO_2$ dielectric layer in organic thin film transistors. We compared the electrical properties of pentacene-based OTFTs, treated by $O_2$ plasma or Ar ion beam treatments and characterized the states of the surface of the dielectric by using atomic force microscopy and X-ray photoelectron spectroscopy. For the sample which received $O_2$ plasma treatment, the mobility increased significantly but the on/off current ratio was found very low. The Ar ion beam-treated sample showed a very high on/off current ratio as well as a moderately improved mobility. XPS data taken from the dielectric surfaces after each of treatments exhibit that the ratio of between Si-O bonds and O-Si-O bonds was much higher in the $O_2$ plasma treated surface than in the Ar ion beam treated surface. We believe that our surface treatment using an inert gas, Ar, carried out an effective surface cleaning while keeping surface damage very low, and also the improved device performances was achieved as a consequence of improved surface condition.

• Journal of Adhesion and Interface
• /
• v.17 no.4
• /
• pp.141-148
• /
• 2016

In this work, mesoporous silica (SBA-15) was synthesized via self-assembly process using triblock copolymer ($PEO_{20}PPO_{70}PEO_{20}$, P123) as template and tetraethyl orthosilicate (TEOS) as silica source under acidic condition. SBA-15 have high surface area ($704m^2g^{-1}$) and uniform pore size (8.4 nm) with well-ordered hexagonal mesostructure. Spiropyran-functionalized SBA-15 (Spiropyran-SBA-15) was synthesized via post-synthesis process using 3-(triethoxysilyl)propyl isocyanate (TESPI) and 1-(2-Hydroxyethyl)-3,3-dimethy-lindolino-6'-nitrobenzopyrylo-spiran (HDINS). Spiropyran-SBA-15 was produced with hexagonal array of mesopores without damage of mesostructre. Surface area and pore size of Spiropyran-SBA-15 were $651m^2g^{-1}$ and 8.0 nm, respectively. Optochemical properties of Spiropyran-SBA-15 was studied with chemical vapors such as EtOH, THF, $CHCl_3$, Acetone and HCl. Main peaks of photofluorescence of Spiropyran-SBA-15 exhibited blue shift in the range of 603.4~592.1 nm after exposure under EtOH, THF, $CHCl_3$, and Acetone vapors. Normalized peak intensities decreased in the range of 0.8~0.3. The main peak of photofluorescence of Spiropyran-SBA-15 showed significant blue shift of 592.1 nm after exposure under HCl vapor, while normalized peak intensity decreased to 0.1.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.561-566
• /
• 2005

Polycrystalline silicon films were deposited using hot wire CVD (HWCVD). The deposition of silicon thin films was approached by the theory of charged clusters (TCC). The TCC states that thin films grow by self-assembly of charged clusters or nanoparticles that have nucleated in the gas phase during the normal thin film process. Negatively charged clusters of a few nanometer in size were captured on a transmission electron microscopy (TEM) grid and observed by TEM. The negatively charged clusters are believed to have been generated by ion-induced nucleation on negative ions, which are produced by negative surface ionization on a tungsten hot wire. The electric current on the substrate carried by the negatively charged clusters during deposition was measured to be approximately $-2{\mu}A/cm^2$. Silicon thin films were deposited at different $SiH_4$ and $H_2$ gas mixtures and filament temperatures. The crystalline volume fraction, grain size and the growth rate of the films were measured by Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The deposit ion behavior of the si1icon thin films was related to properties of the charged clusters, which were in turn controlled by the process conditions. In order to verify the effect of the charged clusters on the growth behavior, three different electric biases of -200 V, 0 V and +25 V were applied to the substrate during the process, The deposition rate at an applied bias of +25 V was greater than that at 0 V and -200 V, which means that the si1icon film deposition was the result of the deposit ion of charged clusters generated in the gas phase. The working pressures had a large effect on the growth rate dependency on the bias appled to the substrate, which indicates that pressure affects the charging ratio of neutral to negatively charged clusters. These results suggest that polycrystalline silicon thin films with high crystalline volume fraction and large grain size can be produced by control1ing the behavior of the charged clusters generated in the gas phase of a normal HWCVD reactor.

• Korean Journal of Clinical Pharmacy
• /
• v.25 no.1
• /
• pp.18-26
• /
• 2015

Background: The recent change in pharmaceutical education system following the paradigm shift to patient-oriented pharmacy service requires an in-depth discussion to reorganize a future direction and establish a basis for maximizing social values of community pharmacy service. Objective: This study was conducted to review the current status of community pharmacy service provision in Korea based on published literatures. Methods: The electronic databases of National Digital Science Library and Electronic National Assembly Library were used to search the journal articles and dissertation papers. A search term "community pharmacy" was used and the published period was limited to papers published after year 2001, when the legal separation of prescribing and dispensing was implemented. Relevant study reports were also searched manually. Information about pharmacy service provision and study outcomes were retrieved from the selected papers, and classified by predefined individual service scope. Results: A total 33 papers reporting services provided by community pharmacies were selected (journal article 11, dissertation paper 17, and study report 5). Pharmacy services identified in these papers could be classified into prescription dispensing service, pharmaceutical care service, self medication service, other products service, and health promotion service. Twenty papers reported prescription dispensing services, three papers reported pharmaceutical care service, and only two papers reported health promotion service. Current community pharmacy services are highly dependent on prescription drugs while expanded services such as pharmaceutical care and health promotion are peripheral. Most prevalent research topic was medication counseling service (18 papers), reflecting that community pharmacists generally consider it to be the most important and fundamental service. Overall, current pharmacy services are very limited and focus on prescription dispensing service. Conclusion: At this point of time requiring expansion and quality improvement of community pharmacy services, we suggest further lively discussion to strengthen pharmacist's functional identity and set conditions for providing socially expected services.

• Clean Technology
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2018

This study presents a novel and eco-friendly process that can precisely control the location of the patches on the patch particles. The method of manufacturing these anisotropic hexagram patch particles consists of sequential combinations of two separate methods such as a sequential micromolding technique for fabricating patch particles and a selective localization method for controlling the location of patches on the patch particles. The micromolding technique was carried out using physicochemically stable material as a micromold. In order to fabricate the highly stable patch anisotropic hexagram particles, the perfluoropolyether (PFPE) micromold was used to the process of the micromolding technique because they could prevent the problem of diffusion of hydrophobic monomers while conventional poly(dimethylsiloxane) (PDMS) micromold is limited to prevent the problem of diffusion of hydrophobic monomers. Based on combination methods of the micromolding technique and the selective localization method, the reproducibility and stability have been improved to fabricate 12 different types of anisotropic hexagram patch particles. This fabrication method shows the unique advantages in eco-friend condition, easy and fast fabrication due to less number of process, the feasibility of a mass production. We believe that these anisotropic hexagram patch particles can be widely utilized to the field of the directional self-assembly.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.510-515
• /
• 1997

Packaging takes an extremely important element of optical module cost due primarily to the added complication of alignment between semiconductor devices and optical fiber, and many efforts have been devoted on reducing the cost by eliminating the complicated optical alignment procedures in passive manner. In this study, we fabricated silicon optical benches on which the optical alignments are accomplished passively. To improve the positioning accuracy of a flip-chip bonded LD, we adopted fiducial marks and solder dams which are self-aligned with V-groove etch patterns, and a stand-off to control the height and to improve the heat dissipation of LD. Optical sub-assemblies exhibited an average efficiency of -11.75$\pm$1.75 dB(1$\sigma$) from the LD-to-single mode fiber coupling and an average sensitivity of -35.0$\pm$1.5 dBm from the fiber and photodetector coupling.