• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.452-455
• /
• 2004

In this paper, investigations of the SAMs(self-assembled monolayers) of a thiol-fuctionalized viologen derivatives, $V_8SH$ and $SH_8V_8SH$, where, V is N,N'-dialkylbipyridinium (i.e. a viologen group), have been carried out by elucidate voltammetry date. The redox reactions are highly reversible and can be cycled many times without significant side reaction, which has been known as a nano-gram order mass detector through resonant frequency change self-assembly process of the viologen has been investigated with $QCM({\Delta}F)$. The assembling process of the $V_8SH$ and $SH_8V_8SH$ monolayers can be finished completely in about 1 hour. The measured frequency shift for $V_8SH$ and $SH_8V_8SH$ were about 351 and 172 Hz, respectively. From these values, we calculated that the mass adsorbed $V_8SH$ and $SH_8V_8SH$ were about 375 and 183 ng. We believe that this mass loss is caused by the simultaneous loss of the anions present within the monolayer for charge compensation of the viologen dications and some solvent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.139-141
• /
• 2005

It is possble to study charge transfer property which is caused by height variation because we can see the organic materials barrier height and STM tip by organic materials energy band gap. Here, we investigated the negative differential resistance(NDR) and charge transfer property of self-assembled 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment($H_{2}SO_{4}:H_{2}O_{2}$=3:1) Si. The Au substrate was exposed to a 1 mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/1$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_{2}Cl_{2}$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -1.50 V to -1.20 V with 298 K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found that NDR and charge transfer property by a little change of height when the voltage is applied between STM tip and electrode.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1539-1542
• /
• 2005

Self-assembled monolayers (SAMs) formed by the adsorption of alkanethiols, $HS(CH_2)_nX$, where X is an organic functional group, onto gold surfaces have attracted widespread interest as templates for the fabrication of molecular and biomolecular microstructures. Previously photopatterning has been thought of as being restricted to the micron scale, because of the wellknown diffraction limit. So, we have explored a novel approach to nanofabrication by utilizing a femtosecond laser coupled to a near-field scanning optical microscope (NSOM).

• 폴리머
• /
• 제29권4호
• /
• pp.331-337
• /
• 2005

일반적으로 꼬리부분에 카복실산을 갖는 알칸티올레이트는 바이오 물질의 고정화 활성물질로 사용되고 있다. 본 연구에서는 알칸티올레이트의 전기적 성질과 물리적 안정성을 향상시키기 위해 공액구조를 갖는 방향족계 티올레이트를 사용하여 cytochrome c와 같은 단백질을 고정화시켰다. 방향족계 자기조립 단분자막의 패턴 형성은 다음과 같은 공정으로 행하였다. 4'-Mercapto-biphenyl-4-carboxylic acid와 4-mercapto-[1,1';4',1']terphenyl-4'-carboxylic acid와 같은 방향족 티올레이트 분자를 금 기판에 흡착시킨 다음 네거티브 마스크를 가지고 원자외선 조사에 의해 산화반응을 시킨 후 deioniz water로 현상하였다. 공액계 자기조립 단분자막의 패턴형성과 전기적 성질은 STM과 AFM 측정을 통해 조사하였다. 또한 cytochrome c 또는 ferrocene amide를 패턴이 형성된 금 기판에 고정화시킨 다음 cyclic voltammeoy 측정을 통해 공액계 방향족 티올레이트의 전기적 활성을 검토하였다.

• 통합자연과학논문집
• /
• 제4권4호
• /
• pp.311-314
• /
• 2011

Application of self-assembled monolayers (SAMs) to the fabrication of organic thin film transistor has been recently reported very often since it can help to provide ohmic contact between films as well as to form simple and effective electrode pattern. Accordingly, quality of these ultra-thin films is becoming more imperative. In this study, in order to manufacture a high quality SAM pattern, a hydrophobic alkylsilane monolayer and a hydrophilic aminosilane monolayer were selectively coated on $SiO_2$ surface through the consecutive procedures of a micro-contact printing (${\mu}CP$) and dip-coating methods under extremely dry condition. On a SAM pattern cleaned with SC1 solution immediately after ${\mu}CP$, poly(3,4-ethylenedioxythiophene) (PEDOT) source and drain electrode array were very selectively and nicely vapour phase polymerized. On the other side, on a SC1-untreated SAM pattern, PEDOT array was very poorly polymerized. It strongly suggests that the SC1 cleaning process effectively removes unwanted contaminants on SAM pattern, thereby resulting in very selective growth of PEDOT electrode pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1893-1895
• /
• 2001

In this paper, novel release technique using wet etch is proposed. The results of this technique and the results of SAMs (Self-Assembled monolayers) coated after release using this technique are compared. Fabricated structure have 100 um in width and experimental length is from 100 um to 1 mm. Thickness of aluminum sacrificial layer is 2 um and structure thickness is 2.5 um. Cantilevers and bridges are fabricated with electroplated gold and silicon nitride deposited on substrate. An aluminium sacrificial layer was evaporated thermally and removed in various wet etching solutions. Detachment length of cantilever is 200 um and detachment length of bridge is 1 mm after isooctane rinsing. And the SAMs coating condition which is appropriate for gold and nitride are studied respectively.

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.981-987
• /
• 2002

$St\"{o}ber$ process를 이용하여 단분산 콜로이드 실리카를 제조하였다. 초기물질인 TEOS(Tetraethylorthosilicate)와 $NH_4OH$, 에탄올 및 증류수의 함유량을 조절하여 100 nm급, 200 nm급, 300 nm급 크기의 단분산 실리카 입자를 제조할 수 있었고, 제조된 실리카 입자는 Scanning Electron Microscope(SEM) 및 laser scattering particle analyzer를 통해 관찰하였다. Dipcoating 공정을 이용하여 제조된 300 nm 크기의 콜로이드 실리카의 자기 배열성(self-assembly) 형성에 관한 연구를 진행하였다. 다양한 코팅 공정 변수(표면장력, 표면전하, 입자의 함유량)의 조절을 통하여 dip coating시에 자기 배열성 단층막(monolayer)을 형성해 낼 수 있는 조건을 최적화하였고, SEM으로 관찰해 본 결과, 최적 조건 상태에서 비교적 넓은 영역 (1.5 mm ${\times}$ 1.5 mm)에서 hexagonally ordered packing된 콜로이드 입자 결정 단층막을 얻을 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1582-1584
• /
• 2008

This paper reports a simple fabrication method for creating the superhydrophobic polymer surface using a plasma etching. Generally, it is necessary for the superhydrophobic surfaces to have a rough structure on surface with the composition of the low surface energy. In this study, Poly(methyl methacrylate) (PMMA), poly(ethylene terephthalate) (PET), acrylonitrile butadiene styrene (ABS) with superhydrophobic surface were fabricated using $O_2$ plasma etching and vapor deposition with the fluoroalkylsilane self-assembled monolayers. The plasma treated polymer surfaces are covered with the nano-pillar shaped structures after treatment for $1{\sim}2min$. And these samples with FOTS SAMs coating are showed the superhydrophobicity having the water contact angle of around $150^{\circ}$ and sometimes around $180^{\circ}$ depending on the treatment time. Furthermore the nanostructured polymer is transparent for the visible light.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.64-68
• /
• 2023

유기 전계효과 트랜지스터(OFETs)는 유기 반도체를 채널층으로 하여 유연한 기판에서 제작할 수 있어 차세대 전자 소자 분야에서 각광받고 있다. 특히 diketopyrrolopyrrole (DPP) 계열 고분자 반도체는 다른 유기 반도체에 비하여 전하 이동도가 높아 활발하게 활용되고 있지만 여전히 무기 반도체에 비하여 낮아, 유기반도체의 전하 이동도를 향상시키기 위한 여러 연구가 진행되고 있다. 본 연구에서는 절연체와 고분자 반도체사이에 자가 조립 단층 박막을 형성하여 표면 에너지를 제어함으로써 고분자 반도체의 결정성을 향상시키고자 하였다. 이를 통해 고분자 박막의 결정성을 성공적으로 제어할 수 있었고, 유기 반도체의 전하 이동도를 3.57×10^-3 cm²V^-1s^-1에서 5.12×10^-2 cm²V^-1s^-1로 약 14배 향상시킬 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.91-92
• /
• 2006

The electrical properties of viologen derivatives were studied in terms of the tunneling current characteristics on the length of the viologen derivatives using self-assembling techniques and ultra high vacuum scanning tunneling microscopy (UHV-STM). We fabricated the Au substrate were deposited by thermal evaporation system ($420^{\circ}C$. Self-assembled monolayers (SAMs) were prepared on Au (111), which had been thermally deposited onto freshly cleaved, heated mica. The Au substrate was exposed to a 1 mM solution of viologen derivatives in ethanol for 24 hours to form a monolayer. We measurement of the morphology on the single viologen molecules ($VC_{8}SH$, $VC_{10}SH$, $HSC_{8}VC_{8}SH$, and $HSC_{10}VC_{10}SH$). The current-voltage (I-V) and differential conductance (dl/dV-V) properties were measured while the electrical properties of the formed monolayer were scanned by using a STS. The effective barrier height of viologen derivatives ($VC_{8}SH$, $VC_{10}SH$, $HSC_{8}VC_{8}SH$, and $HSC_{10}VC_{10}SH$) were calculated to be 1.076 eV, 1.56 ${\pm}$ 0.3 eV, 1.85 eV, 2.28 eV, respectively.