• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.81-87
• /
• 2000

A new resonator that is fabricated by single polysilicon layer process is presented. The resonator can move in two orthogonal direction on the plane parallel to the substrate. And the resonant frequencies of the two modes are intrinsically designed to be identical since the overall structure of the resonator is symmetric about the two directions of motion. Since the resonator ideally has two identical vibration mode, it can be applied to various micro-devices that requires multi DOF motion, especially to microgyroscopes. To investigate the feasibility of application of the resonator, dynamic model of the resonator including the nonlinear behavior of driving electrodes is derived and evaluated with the fabricated one, and the self-tuning characteristics are proved though experiments.

• 한국광학회지
• /
• 제6권4호
• /
• pp.288-295
• /
• 1995

무한한 Fresnel number를 갖는 imaging unstable ring resonator에 의한 펄스형 Nd:YAG 레이저 출력 광속의 위상파면을 분석하였다. 본 연구를 위하여 4개의 평면경과 망원경을 포함하는 Negative Branch Unstable Ring Resonator(NBUR) Nd:YAG 레이저를 제작하였다. NBUR 공진기 내에서 증폭되는 광속이 scraper mirror의 원형 투과창을 통해 투과하는 과정에서 발생하는 회절효과는 광학 공진계에 self imaging 조건을 줌으로서 크게 감소시킬 수 있었다. 이러한 self imaging 광속이 고리형 공진계를 반복적으로 진행함으로서 위상파면의 공간적 가간섭성이 향상 되는 것으로 해석 되었다. 레이저 출력 광속의 공간적 위상파면 정보는 Mach-Zehnder 간섭계에 의하여 얻어지는 간섭무늬를 이용하여 얻었으며 이 간섭무늬를 Fourier 변환 방법으로 분석한 결과, 위상파면 왜곡정도가 0.2.lambda.이하 값임을 측정하였다. 이것을 정상파형 레이저 공진기에서의 출력 광속과 비교한 결과 공간적 가간섭성이 75% 정도 향상되었음을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.825-830
• /
• 1996

In this study, Characteristics of Ultrasonic Transducer fabricated with porous piezoelectric resonator, 3-D underwater object restoration using the self made ultrasonic transducer and modified SCL(Simple Competitive Learning) neural network are investigated. The self-made transducer was satisfied the required condition of ultrasonic transducer in water, and the modified SCL neural network using the acquired object data 16*16 low resolution image was used for object restoration of $32{\times}32$ high resolution image. The experimental results have shown that the ultrasonic transducer fabricated with porous piezoelectric resonator could be applied for SONAR system.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권9호
• /
• pp.916-921
• /
• 1997

In this study Characteristics of 3-D underwater object recognition independent of translation using the self-made ultrasonic sensor fabricated with porous piezoelectric resonator and presented. The sensor was satisfied with requirement of ultrasonic sensor. The recognition rates for the training data and the testing data are 97.45 and 91.25[%] respectively using the self-made ultrasonic sensor and SCL(Simple Competitive Learning) neural network. According to the experimental results It is believed that the self-made ultrasonic sensor can be applied as sensor of SONAR system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.316-319
• /
• 1996

In this study, characteristics of ultrasonic transducer fabricated with porous piezoelectric resonator are investigated, 3-D underwater object recognition using the self-made ultrasonic transducer and SOFM(Self-Organizing Feature Map) neural network are presented. The self-made transducer was satisfied the required condition of ultrasonic transducer in water, and the recognition rates for the training data and the testing data were 100 and 95.3% respectively. The experimental results have shown that the ultrasonic transducer fabricated with porous piezoelectric resonator could be applied for sonar system.

• 한국광학회지
• /
• 제10권3호
• /
• pp.221-225
• /
• 1999

레이저선속의 퍼짐각을 개선하기 위하여 공진기 내부에 선속분할기를 갖는 양영역 공초점 불안정공진기 구리증기레이저를 구성하였다. 기하광학적 배율 M=30인 공진기에서 0.15 mard의 최소 퍼짐각을 얻었고, M=60인 공진기를 사용하여 0.1 mard 의 값을 얻을 수 있었다. 퍼짐각 개선과 관련하여 상대적인 원거리 출력밀도가 최대 130배 증가된 레이저 출력을 얻을 수 있었으며, 자체잠김현상을 보이는 펄스 형태의 레이저 발진이 관측되었다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.365-366
• /
• 2002

A novel TEM resonator coil was developed for the imaging of small animals. The functional elements of the TEM resonator were 8 inner conductors, distributed in a cylindrical pattern and connected at the ends with capacitors to the cylindrical outer shield. The TEM resonator coil with cavity elements was robust to the surrounding influences due to the self-shielding structure. The TEM resonator coil with high Q factor could provide high quality MR images at 3.0T MRI system. Also, the TEM resonator coil has an advantage for a fine tune with length adjustment of each cavity elements. Thus, The TEM resonator coil at 3.0T, even higher field could be used in the research studies.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.309-314
• /
• 1999

The magnetized helical resonator plasma etcher has been built. Electron density and temperature were measured as functions of rf source power, axial magnetic field, and pressure. The results show electron density increases as the magnetic field increases and reached $2\times1012cm^{-3}$,/TEX>. The oxide etch rate and selectivity to polysilicon were investigated as the above mentioned conditions and self-bias voltage. We can obtain the much improved oxide etch selectivity to polysilicon (60 : 1) by applying the external axial weak magnetic field in magnetized helical resonator plasma etcher.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.125-131
• /
• 2010

Switched-resonator converters are a new family of soft switching DC-DC converters where the energy is transferred via a resonator. This paper introduces some isolated topologies of this family. The achieved advantages include, load independent soft-switching, self short-circuit protection, and optimization capability due to topology variety. Compared to conventional series-resonant converters, outstanding advantages such as a smaller fewer number of switches and diodes, a smaller transformer, and lower current stresses are achieved. A general synthesis scheme, functional topologies, and essential relations are included. Experimental results from a laboratory prototype confirm the presented theoretical analysis.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.352-355
• /
• 2013

본 논문에서는 자기 공명 방식의 무선 전력 전송 시스템을 위한 고출력 가변 공진기를 제안하였다. 공진 코일에는 스파이럴 구조를 사용하였으며, 공진 코일의 양 끝단에 고출력용 가변 트리머 커패시터를 연결하여 주파수 가변이 용이하도록 설계하였다. 3D 시뮬레이션 툴과 등가 회로 모델링 기법을 이용하여 커패시터 용량 변화에 따른 공진 주파수 변화와 전달특성을 예측하였다. 무선 전력 전송 시제품을 제작하여 측정한 결과, 송/수신 코일이 160 mm의 거리로 이격되어 있을 때, 3.0~4.5 MHz 범위의 공진 주파수 가변이 용이하였으며, 50%이상의 전송 효율을 얻을 수 있었다.