• Macromolecular Research
• /
• v.16 no.3
• /
• pp.204-211
• /
• 2008

A platinum-catalyzed polyelectrolyte porous membrane was prepared by solid-state compression of electrospun polystyrene (PS) fibers and in-situ metallization of counter-balanced ionic metal sources on the polymer surface. Using this ion-exchange metal-polymer composite system, fiber entangled pores were formed in the interstitial space of the fibers, which were surrounded by sulfonic acid sites ($SO_3^-$) to give a cation-selective polyelectrolyte porous bed with an ion exchange capacity ($I_{EC}$) of 3.0 meq/g and an ionic conductivity of 0.09 S/cm. The Pt loading was estimated to be 16.32 wt% from the $SO_3^-$ ions on the surface of the sulfonated PS fibers, which interact with the cationic platinum complex, $Pt(NH_3)_4^{2+}$, at a ratio of 3:1 based on steric hindrance and the arrangement of interacting ions. This is in good agreement with the Pt loading of 15.82 wt% measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The Pt-loaded sulfonated PS media showed an ionic conductivity of 0.32 S/cm. The in-situ metallized platinum provided a nano-sized and strongly-bound catalyst in robust porous media, which highlights its potential use in various electrochemical and catalytic systems.

• The Korean Journal of Mycology
• /
• v.37 no.2
• /
• pp.161-166
• /
• 2009

The purpose of the present study is to develop a simple, fast and sensitive LC/MS method for simultaneous separation and the determination of an active component in the oriental medicinal mushroom Cordyceps militaris. Based on this work, the contents of cordycepin in Cordyceps militaris fruiting cultivated on various media were determined and compared. And also, the nutritional components such as minerals and vitamins were determined in order to provide useful information to consumer as a food material. The analysis methods of nutritional components were chosen on the basis of AOAC. The optimum separation for cordycepin was achieved using a solvent gradient consisting of the mixture of 0.1% formic acid in methanol (solvent B) in a background of 0.1% formic acid in water (solvent A) as a mobile phase and a 3.0${\times}$150 Waters XTera column. Selective ion monitoring (SIR) mode ([M+H]+ at m/z 252) was used for quantitative analysis of cordycepin. The cultivated Cordyceps militaris on various media contained 1~14 /g of cordycepin, 0.65~1.08% of thiamine, 0.86~7.17% of riboflavin, and 3.01~5.26% of niacin. The content of mineral components varied on categories, especially contained 500~3500% of potassium as a major mineral. Cordycepin, niacin and potassium were found much higher in the fruiting cultivated with soy power media (gold 10) than other media.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.1-7
• /
• 2021

In this paper, optimized media data retrieval and transmission based on the Hybrid CDN/P2P architecture and selective storage through user's prediction of requestability enable seamless data transfer to users and reduction of unnecessary traffic. We also propose a new media management method to minimize the possibility of transmission delay and packet loss so that media can be utilized in real time. To this end, we construct each media into logical segments, continuously compute weights for each segment, and determine whether to store segment data based on the calculated weights. We also designate scattered computing nodes on the network as local groups by distance and ensure that storage space is efficiently shared and utilized within those groups. Experiments conducted to verify the efficiency of the proposed technique have shown that the proposed method yields a relatively good performance evaluation compared to the existing methods, which can enable both initial latency reduction and seamless transmission.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.69-71
• /
• 2000

Redox-active calix[4]arenes with carboxylic acid and disulfide groups were prepared and spontaneous deposition on silver and gold surfaces was observed. Owing to their unusual structure, the calix[4]arenes exhibit selective affinity fur alkaline earth metal ions in aqueous media. When annular ionophores are immobilized on the surface, voltammetric and spectroscopic studies show the entrapment of metal ions. Furthermore, it was possible to reversibly capture and remove the ions using strong chelating agents such as ethylenediaminetetraacetic acid (EDTA).

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.56-63
• /
• 2010

Since emission regulations for vehicles have become more stringent, SCR technology has drawn a strong attention in order to reduce NOx emissions. Optimal design of a reductant injection nozzle and a multi-hole plate located between the cone and catalyst is critical in that the uniform distribution of reductant is necessary to maximize the NOx conversion efficiency and minimize the slip of reductant in SCR. In this work, an LPG fuel(C3H8 in vapor state) was used as a reductant for LPG vehicles. A Realizable k-$\varepsilon$ model is used for turbulence, and SCR body is defined as porous media with inertia and viscous resistances measured in this work. Effect of the number of nozzle holes on the flow mixing index was analyzed, which revealed that a four hole nozzle shows the best performance in terms of uniformity of flow. An installment of a multi-hole plate at the entrance of catalyst was evaluated with flow mixing index, uniformity of flow, and pressure drop. A multi-hole plate with gradual hole diameter change in three steps showed the best uniformity of flow within the conditions suggested in this work.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2003-2007
• /
• 2011

We report a highly sensitive surface-enhanced Raman scattering (SERS) platform for the selective trace analysis of mercury (II) ions in drinkable water using aptamer-conjugated silver nanoparticles. Here, an aptamer designed to specifically bind to $Hg^{2+}$ ions in aqueous solution was labelled with a TAMRA moiety at the 5' end and used as a Raman reporter. Polyamine spermine tetrahydrochloride (spermine) was used to promote surface adsorption of the aptamer probes onto the silver nanoparticles. When $Hg^{2+}$ ions are added to the system, binding of $Hg^{2+}$ with T-T pairs results in a conformational rearrangement of the aptamer to form a hairpin structure. As a result of the reduced of electrostatic repulsion between silver nanoparticles, aggregation of silver nanoparticles occurs, and the SERS signal is significantly increased upon the addition of $Hg^{2+}$ ions. Under optimized assay conditions, the concentration limit of detection was estimated to be 5 nM, and this satisfies a limit of detection below the EPA defined limit of 10 nM in drinkable water.

• Microbiology and Biotechnology Letters
• /
• v.19 no.2
• /
• pp.135-139
• /
• 1991

Tridecanedioic acid (DC-13), starting material of the valuable musk ethylene brassylate, was obtained from n-tridecane by the Candida tropicalis mutant. The mutants were first obtained from primary screening step using the selective medium and then solid phase extraction sampling method was used for the selective isolation of organic acids from the cultured media of mutants. The resulting acids were directly converted to volatile tert-butyldimethyl silyl delivatives, which were then analyzed by gas chromatography. The efficient GC profiling method was used for the rapid identification of the mutant producing DC-13 in large quantity, and for the optimization of the culture conditions of mutant. The optimal culture conditions were found as follows: pH 8.0, 30$^{\circ}C$, 250rpm, 48hour of culture and $(NH_4)_2HPO_4$ as nitrogen source.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.536-543
• /
• 1995

Multicopy integration vector is a very useful vector system in that they can be integrated into chromosomal DNA in several copies and stably maintained under non-selective conditions. To develop a multicopy integration vector system in the yeast Yarrowia lipolytica, P-type ribosomal DNA was cloned from Y lipolytica. A HindIII-BglII fragment of the cloned rDNA and a promoterless URA3 gene were inserted into pGEM1, generating multicopy integration vectors, pMIYL-1 and pMIYL-2. The rDNA fragment is for targeted homologous recombination between the vector and the chromosomal DNA of Y. lipolytica, and the promoterless URA3 gene is a defective selection marker for inducing multicopy integration. pMIYL-1 and pMIYL-2 have an unique restriction enzyme site, KpnI, and two unique restriction enzyme sites, KpnI and EcoRI, repectively, which can be used for targeting of the vectors into the rDNA of Y. lipolytica chromosomal DNA. After transformation of the vectors into Y. lipolytica, copy number and stability were analyzed by Southern hybridization. The vectors were found to be present in less than 5 copies per cell and were stably maintained during growth in non-selective media.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.1-5
• /
• 2016

Rhodamine B Hydrazide as a novel fluorescent and colorimetric probe exhibiting remarkably selective fluorescence enhancement toward Hg²⁺ ion over other 16 metal ions is herein introduced. The probe reacts with Hg²⁺ ion followed by its spirolactam ring-opening to give a remarkable enhancement of absorption maximum at 550 nm as well as an enhanced fluorescence intensity at 580 nm in aqueous media. Upon titration with Hg²⁺ ion in various concentration of 10~200 uM, we found that the probe shows a marked color change from colorless to pink, enabling naked-eye detection toward mercury ion. In addition, in the presence of Hg²⁺ ion, the probe gave rise to change from non-florescence to strong orange fluorescence (Off-On) with a good linearity of R²=0.97. This preliminary results demonstrate that the fluorescent chemosensor we herein introduced can open a new strategy for marked selective and sensitive detection of mercury ions in contaminated soil containing various metal ions.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.317-326
• /
• 2002

The adaptive coding schemes in H.264 standardization provide a significant ceding efficiency and some additional features like error resilience and network friendliness. The variable block size motion compensation using multiple reference frames is one of the key H.264 coding elements to provide main performance gain, but also the main culprit that increases the overall computational complexity. For this reason, this paper proposes a selective motion estimation algorithm based on variable block size for fast motion estimation in H.264. After we find the SAD(Sum of Absolute Difference) at initial points using diamond search, we decide whether to perform additional motion search in each block. Simulation results show that the proposed method is five times faster than the conventional full search in case of search range $\pm$32.