• Journal of Communications and Networks
• /
• v.10 no.3
• /
• pp.287-296
• /
• 2008

The IEEE 802.11 wireless standard uses the carrier sense multiple access with collision avoidance (CSMA/CA) as its MAC protocol (during the distributed coordination function period). This protocol is an adaptation of the CSMA/CD of the wired networks. CSMA/CA mechanism cannot guarantee quality of service (QoS) required by the application because orits random access method. In this study, we propose a new MAC protocol that considers different types of traffic (e.g., voice and data) and for each traffic type different priority levels are assigned. To improve the QoS of IEEE 802.11 MAC protocols over a multi-channel CSMA/CA, we have developed a new admission policy for both voice and data traffics. This protocol can be performed in direct sequence spread spectrum (DSSS) or frequency hopping spread spectrum (FHSS). For voice traffic we reserve a channel, while for data traffic the access is random using a CSMA/CA mechanism, and in this case a selective reject and push-out mechanism is added to meet the quality of service required by data traffic. To study the performance of the proposed protocol and to show the benefits of our design, a mathematical model is built based on Markov chains. The system could be represented by a Markov chain which is difficult to solve as the state-space is too large. This is due to the resource management and user mobility. Thus, we propose to build an aggregated Markov chain with a smaller state-space that allows performance measures to be computed easily. We have used stochastic comparisons of Markov chains to prove that the proposed access protocol (with selective reject and push-out mechanisms) gives less loss rates of high priority connections (data and voices) than the traditional one (without admission policy and selective reject and push-out mechanisms). We give numerical results to confirm mathematical proofs.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.151-157
• /
• 1996

We propose a mechanism for the formation of pinholes in the Si-buffer layer, through the observations with varying the process- and structure variables in the SEPOX (selective poly-oxidation) process, an isolation method for sub-u DRAMs. Pinholes are formed through the accumulation of Si vacancies generated by the oxidation of Si, in which Si atoms leave the sites (vacancies) at the Si/SiO$_{2}$ interfaces and diffuse into the oxide to be oxidized near interface. In the course of the accumulation of Si-vacancies, the stress induced in the Si-buffer layer affects the migration of vacancies to result in the final size and distribution of pinholes. This paper may be, to our knowledge, the first report about the oxidation-induced pinhole in the Si/SiO$_{2}$ system.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.199-202
• /
• 1998

In this paper, to reduce BER(Bit Error Rate) in satellite ATM Networks, a new scheme for FEC(Forward Error Corection) using multi-stage Viterbi coder is proposed. In terms of structural complexity, proposed multi-stage Viterbi coder is simpler than the traditional single-stage coder based on the same BER performances. and, through simulation, proposed coder shows excellent error correction capabilities, compared with traditional FEC schemes. Also, we propose a selective FEC mechanism that adaptively changes the number of stages to satisfy the QoS(Quality of Service) requirements. This Selective scheme can be easily implemented using the PLCP(Physical Layer Convergence Protocol) frame structure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.360-363
• /
• 2007

In sensor network, the importance of transporting data with reliability is growing gradually to support communications. Data flow from sink to nodes needs reliability for the control or management, that is very sensitive and intolerable, however relatively, data flow from nodes to sink is tolerable. In this paper, with emphasis of the data flow from sink to nodes, we proposed the mechanism that establishes confidence interval for transport. Establishing confidence interval hop-by-hop, not end to end, if errors happen or there's missing data, this mechanism recovers them with selective acknowledgement using fixed window. In addition, this mechanism supports traffic congestion control depending on the buffer condition. Through the simulation, we showed that this mechanism has an excellent performance for error recovery in sensor network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1190-1194
• /
• 2007

In sensor network, the importance of transporting data with reliability is growing gradually to support communications. Data flow from sink to nodes needs reliability for the control or management, that is very sensitive and intolerable, however relatively, data flow from nodes to sink is tolerable. In this paper, with emphasis of the data flow from sink to nodes, we proposed the mechanism that establishes confidence interval for transport. Establishing confidence interval herby-hop, not end to end, if errors happen or there's missing data, this mechanism recovers them with selective acknowledgement using fixed window. In addition, this mechanism supports franc congestion control depending on the buffer condition. Through the simulation, we showed that this mechanism has an excellent performance for error recovery in sensor network.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.237-241
• /
• 2012

In wireless sensor networks, the importance of transporting data correctly with reliability is increasing gradually along with the need to support communications between the nodes and sink. Data flow from the sink to the nodes requires reliability for control or management that is very sensitive and intolerant of error; however, data flow from the nodes to the sink is relatively tolerant. In this paper, with emphasis on the data flow from the sink to the nodes, we propose a mechanism that considers accurate transport with reliability hop-by-hop. During the process of sending the data, if errors occur or data is missing, the proposed mechanism supports error recovery using a fixed window with selective acknowledgment. In addition, this mechanism supports congestion control depending on the buffer condition. Through the simulation, we show that this mechanism is accurate, reliable, and proper for transport in wireless sensor networks.

• Journal of Korea Foundry Society
• /
• v.39 no.6
• /
• pp.110-115
• /
• 2019

Recently, various studies have been conducted on additive manufacturing technology developed using metal materials. In this study, a numerical analysis was introduced to analyze the effects of the thermal deformation and residual stress which arise during the SLM (selective laser melting) manufacturing process. A phase-transformation mechanism is implemented with the use of the Ti-6Al-4V material, in which a solid-state phase transformation (SSPT) can be induced during a numerical analysis. In this case, the phase of the Ti-6Al-4V material changes from a powder to a solid state and then to the Martensite phase in sequence during heating and cooling steps. The numerical analysis during the SLM process was verified by comparing the results of tensile tests with those from the numerical analysis based on the SSPT material properties.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2665-2671
• /
• 2000

Dimensional Synthesis, which is apart of kinematic synthesis, is to determine the dimensions of a mechanism of preconceived typer for a specified task and prescribed performance. In this paper, in an effort to provide designers with flexibility, a dimensional approximate synthesis method is presented for utilizing prescribed tolerance both the displacement and joint positions of a mechanism to be synthesized. For this, a constrained optimization problem is formulated with displacement parameters and joint positions as variables. The proposed method is applied to the synthesis of a 5-SS multi link suspension mechanism. The method discussed here, however, can be easily applied to any mechanism of which the kinematic constraint equations can be derived.

• Proceedings of the KGS Conference
• /
• 2003.11a
• /
• pp.29-33
• /
• 2003

Sandy shoreface에서 외해로 가면서 퇴적물의 입경이 작아지는 퇴적물의 분급이 이루어지고 있다는 것은 잘 알려진 사실이다 (e.g., Inman 1953; Niedoroda et al.,1985; Bailard and Bowen 1981; Guillen and Hoekstra, 1996). 이러한 cross-shore의 퇴적물 입경 분급에 중요한 mechanism은 표층에서 상대적으로 큰 입자들이 bedload로 해안으로 이동하는 반면, 표층에서 높이 부유한 부유 퇴적물이 외해로 운반되는 양 방향 퇴적물 이동이라고 할 수 있다. (중략)

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.90.2-91
• /
• 2003

In commercial greenhouses, senescent flower petals or flowers of vegetables such as tomato, strawberry, hot pepper and zucchini squash were blighted to be removed from fruits within five days after spraying of Trichoderma harzianum YC459 (TORY), a biocontrol agent for the gray mold rot of vegetables caused by B. cinerea The mechanism for selective colonization of senescent floral tissues by T. harzianum YC459 was elucidated using fresh and senescent (Hays and 14days after flowering, respectively) floral tissues of zucchini squash (Cucurbita moschata Duchesne). The spores of T. hrzianum YC459 were produced more on agar and liquid culture media supplemented with 5％ dry powder of senescent floral tissues than fresh tissues during 15days. Mycelial growth was also much better in the media with senescent tissues than with fresh tissues. Enzyme activities of amylase, polygalacturonase and cellulase in the liquid media which might be involved in the colonization of tissues by T. harzianum YC459 were compared. The activities of three enzymes were much higher in the media with senescent floral tissues than with fresh floral tissues reaching to the maximum during 9 to 12days of incubation. Based on the results, the removal of senescent floral tissues, a possible inoculum source of the pathogen, may be another mechanism for biocontrol of gray mold rot of vegetables by T. harzianum YC459.