• Journal of Microbiology and Biotechnology
• /
• v.16 no.6
• /
• pp.880-888
• /
• 2006

Pleurocidin, an $\alpha$-helical cationic antimicrobial peptide, was isolated from skin mucosa of winter flounder (Pleuronectes americamus). It had strong antimicrobial activities against Gram-positive and Gram-negative bacteria, but had very weak hemolytic activity. The Gly$^{13,17}\rightarrow$Ala analog (pleurocidin-AA) showed similar antibacterial activities, but had dramatically increased hemolytic activity. The bacterial cell selectivity of pleurocidin was confirmed through the membrane-disrupting and membrane-binding affinities using dye leakage, tryptophan fluorescence blue shift, and tryptophan quenching experiments. However, the non-cell-selective antimicrobial peptide, pleurocidin-AA, interacts strongly with both negatively charged and zwitterionic phospholipid membranes, the latter of which are the major constituents of the outer leaflet of erythrocytes. Circular dihroism spectra showed that pleurocidin-AA has much higher contents of $\alpha$-helical conformation than pleurocidin. The tertiary structure determined by NMR spectroscopy showed that pleurocidin has a flexible. structure between the long helix from $Gly^3$ to $Gly^{17}$ and the short helix from $Gly^{17}$ to $Leu^{25}$. Cell-selective antimicrobial peptide pleurocidin interacts strongly with negatively charged phospholipid membranes, which mimic bacterial membranes. Structural flexibility between the two helices may play a key role in bacterial cell selectivity of pleurocidin.

• Korean Journal of Microbiology
• /
• v.30 no.3
• /
• pp.207-212
• /
• 1992

To develope the new strains of microorganisms having the degradative ability for various aromatic hydrocarbons. spheroplast cell fusions were performed with Arthrobacter spp. degrading phthalate ester and Pseudomonas putida degrading alkylbenzen sulfonate(ABS) and the characteristics of the fusants were investigated. The spheroplasts of P. putia KUD15 and Arthrobacter sp. were formed effectively by lysozyme-EDTA treatment and by Ampicillin-lysozyme-EDTA treatment. respectively. The Spheroplast formation frequency and the regeneration frequency of the strains were 98-99% and 5-8%, respectively. For cell fusion. 40% PEG6000 was used as a fusogenic agent and the formation frequencies of fusion product were $1.8{\times}10^{4}-$2.9{\times}10^{4}$ Most of the fusants, which were selected in complemented antibiotics media showed the degradative ability in minimal selective medium added phthalate ester or ABS as sole carbon source. ABS degradation by fusant strain was increased about 20% with compared with the parental strain, while the degradative ability of phthalate ester was simillilar to that of parental strain.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.4
• /
• pp.359-364
• /
• 2012

Objective : Transpedicular screw fixation has some disadvantages such as postoperative back pain through wide muscle dissection, long operative time, and cephalad adjacent segmental degeneration (ASD). The purposes of this study are investigation and comparison of radiological and clinical results between interspinous fusion device (IFD) and pedicle screw. Methods : From Jan. 2008 to Aug. 2009, 40 patients underwent spinal fusion with IFD combined with posterior lumbar interbody fusion (PLIF). In same study period, 36 patients underwent spinal fusion with pedicle screw fixation as control group. Dynamic lateral radiographs, visual analogue scale (VAS), and Korean version of the Oswestry disability index (K-ODI) scores were evaluated in both groups. Results : The lumbar spine diseases in the IFD group were as followings; spinal stenosis in 26, degenerative spondylolisthesis in 12, and intervertebral disc herniation in 2. The mean follow up period was 14.24 months (range; 12 to 22 months) in the IFD group and 18.3 months (range; 12 to 28 months) in pedicle screw group. The mean VAS scores was preoperatively $7.16{\pm}2.1$ and $8.03{\pm}2.3$ in the IFD and pedicle screw groups, respectively, and improved postoperatively to $1.3{\pm}2.9$ and $1.2{\pm}3.2$ in 1-year follow ups (p<0.05). The K-ODI was decreased significantly in an equal amount in both groups one year postoperatively (p<0.05). The statistics revealed a higher incidence of ASD in pedicle screw group than the IFD group (p=0.029) Conclusion : Posterior IFD has several advantages over the pedicle screw fixation in terms of skin incision, muscle dissection and short operative time and less intraoperative estimated blood loss. The IFD with PLIF may be a favorable technique to replace the pedicle screw fixation in selective case.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.973-975
• /
• 2016

In this paper, we propose a selective extended Kalman filter based accurate pose estimation of the rigid body using a sensor fusion method. The pose of a rigid body can be estimated roughly by the Gauss-Newton method using the acceleration data and geomagnetic data, which can be refined with vision information and the gyro sensor information. However strong external interference noise makes the rough pose estimation difficult. In this paper, according to the measurement level of the external interference noise, the extended Kalman filter selectively uses mostly vision and gyro sensor information to increase the estimation credibility under strong interference noise environment.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1962-1971
• /
• 2022

The liquid lead-lithium (Pb-17Li) blanket has many applications in fusion reactors due to its good tritium breeding performance, high heat transfer efficiency and safety. The compatibility of liquid Pb-17Li alloy with the structural material of blanket under magnetic field is one of the concerns. In this study, corrosion experiments China low activation martensitic (CLAM) steel and 316L steel were carried out in a forced convection Pb-17Li loop under 1.0 T magnetic field at 480 ℃ for 1000 h. The corrosion results on 316L steel showed the characteristic with a superficial porous layer resulted from selective leaching of high-soluble alloy elements and subsequent phase transformation from austenitic matrix to ferritic phase. Then the porous layers were eroded by high-velocity jet fluid. The main corrosion mechanism of CLAM steel was selective dissolution-base corrosion attack on the microstructure boundary regions and exclusively on high residual stress areas. CLAM steel performed a better corrosion resistance than that of 316L steel. The high Ni dissolution rate and the erosion of corroded layers are the main causes for the severe corrosion of 316L steel.

• BMB Reports
• /
• v.42 no.11
• /
• pp.731-736
• /
• 2009

The generation of functional recombinant antibodies from hybridomas is necessary for antibody engineering. However, this is not easily accomplished due to high levels of aberrant heavy and light chain mRNAs, which require a highly selective technology that has proven complicated and difficult to operate. Herein, we attempt to use an alkaline phosphate (AP)-fused form of single-chain variable fragment (scFv) for the simple identification of a hybridoma-derived, functional recombinant antibody. As a representative example, we cloned the scFv gene from a hybridoma-producing mouse IgG against branched-chain keto acid dehydrogenase complex-E2 (BCKD-E2) into an expression vector containing an in-frame phoA gene. Functional recombinant antibodies were easily identified by conventional enzyme-linked immunosorbent assay (ELISA) by employing scFv-AP fusion protein, which also readily serves as a valuable immuno-detective reagent.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.1
• /
• pp.25-31
• /
• 1997

Protoplast fusion between L. casei KCTC 1121 and L. acidophilus 88 was attempted to obtain improved strains. The fusants produced a bacteriocin against indicator strains, making a smaller inhibition zone compared to that of L. acidophilus 88. After culturing for 2 months on selective medium, the selected fusants were still stable without segregation. Fusants showed higher lipase activity compared to those of the two parent strains. Fusant No.4, 11, and 15 exhibited excellent lactic acid productivity. Fusant No.4 and 15 exhibited improved proteolysis ability compared to the two parent strains. Whereas L. casei possessed both ${\beta}-galactosidase$ and $phospho-{\beta}-galactosidase$ activities, and L. acidophilus 88 had only ${\beta}-galactosidase$ activity, the fusants had both the intermediate enzyme activities. Cell size of the fusants was greater than that of the parents.

• Applied Biological Chemistry
• /
• v.42 no.1
• /
• pp.12-19
• /
• 1999

To improve biopolymer productivity and properties of Bacillus strains, protoplast fusion was performed between biopolymer producing Bacillus subtilis K-1 and lactose utilizing Bacillus coagulans. The results were as follows; Protoplasts mixed in fusion fluid containing 33% PEG 6000, 1% PVP and 10 mM $CaCl_2$ were reacted for 5 min at $37^{\circ}C$ and then centrifused protoplasts were directly overlaid on the selective media containing $100\;{\mu}g/ml$ antibiotics and incubated for 3 days. At this conditions, the frequency of protoplast fusion was generally in the range of $4.6{\times}10^{-5}\;to\;1.8{\times}10^{-7}$ in ratio. Segregation ratio was observed between 1 to 6% indicating genetic stability of all the fusants. Fusants growth were also observed on the media contained amino acid and antibiotics as required marked materials. DNA contents of the selected fusants were 1.6 to 2.7 times more than that of parent strains. With observation by TEM microscopy, spherical protoplasts were first released from the swollen parental cells and then contracted to fuse in the process of fusion. And fused cells were observed representative vesicle. Originally, the parental cells were observed as in the morphology of thick-walled and double membrane-surrounded rod shape with TEM microscopy.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05c
• /
• pp.2065-2068
• /
• 2003

본 논문은 복합적인 상황을 고려한 데이터를 이용하여 얼굴인식을 하는 연구로서, 이산 웨이블렛을 기반으로 하는 다 해상도 분석 방법을 사용하고, 각 해상도에서 얻어진 계수를 이용하여 LDA와 ICA기법을 융합하는 방법을 제안한다. 기존의 얼굴인식방법은 정면에서 바라본 임의의 얼굴영상을 이용하므로, 예상하지 못한 얼굴 로션 변화에 대한 고려와 빛의 변화에 대해 고려하지 못했었다. 그러나, 본 연구에서는 다양한 상황을 고려한 데이터를 취득하여 해상도 별로 분리된 대역에 FLD와 ICA를 선택적으로 융합한 알고리즘을 적용하므로서 인식율을 높일 수 있었다

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.481-487
• /
• 2019

Additive manufacturing is a state-of-the-art manufacturing process technology in which three-dimensional structures are fabricated by laminating two-dimensional sections of a structure using various materials such as plastic, ceramics, and metals. The additive manufacturing technology has the advantage of high design freedom, while the surface property (roughness) of the finished product varies depending on the process conditions, which necessitates performing a post-process after the products are manufactured. In this study, the surface roughness of a structure made of polyamide 12, which was manufactured by SLS (Selective Laser Sintering) and MJF (Multi Jet Fusion) process was compared. The processing condition was classified by the building orientation of structure as 0, 45, and 90 degrees, which is the angle between the analytical surface and the horizontal plane of the fabrication platform. Structures with a hole of various diameters ranging from 1mm to 10mm were manufactured and the hole characteristics (ratio of hole depth to diameter) and results of the specimens were compared. As a result of the surface characteristics analysis, the surface roughness value of the specimens manufactured with a building orientation of $45^{\circ}$ was the highest in both technologies. In the case of the through-hole structure fabrication, the shape was maintained with 5mm and 10mm diameter holes regardless of the building orientation, although the hole forming was difficult for the smaller holes.