• 제목/요약/키워드: Selection efficiency

검색결과 1,643건 처리시간 0.026초

Adaptive Feature Selef-selection and Multiple SOFM Neural network for Content-based image Retrieval System (내용기반 복합 영상 검색 시스템을 위한 적응적 특징 자가선택과 다중 SOFM 신경망)

  • 임승린
    • Journal of the Korea Society of Computer and Information
    • /
    • 제5권2호
    • /
    • pp.22-29
    • /
    • 2000
  • The purpose of this paper is to propose a method to maximize a content-based image retrieval efficiency in multiple images. To perform an image retrieval job efficiently, it is necessary to minimize the number of candidate-images. Furthermore, a miximum efficiency of image retrieval could not be expected if an image retrieval job in the multiple images is done on the basis of patterns of single image distinctive features. In this method, a multiple SOFM neural network system is adopted to select automatically distinctive feature patterns which have a maximum efficiency of image retrieval in the multiple images. In this method. an image retrieval efficiency is improved 3% than individual features and the number of candidate-images is reduced by the multiple SOFM neural network system.

  • PDF

Characteristics of Wireless Power Transmission applying the superconducting coil (초전도 코일을 적용한 WPT 특성)

  • Jeong, In-Sung;Choi, Hyo-Sang
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • 제62권6호
    • /
    • pp.762-766
    • /
    • 2013
  • Interest in Wireless Power Transmission (WPT) technology has been increasing worldwide recently. This trend is proved by commercialized products such as electric toothbrush, wireless razor, and wireless charger for mobile phone battery. Studies for enhancing the applicability of the technology have been continuously conducted. Currently the WPT technology is based on the technologies using microwave, inductively coupling, and magnetic resonance. In the meantime, development of the microwave-based WPT faces difficulty due to health hazards involved in the technology, and application of the WPT technology using inductively coupling is restricted by area due to the problem of transmission length. In comparison, the WPT technology using magnetic resonance draws attention in terms of efficiency and transmission length. In this study, the sending coil based on the WPT technology using magnetic resonance system was replaced with an HTS coil to enhance transmission efficiency. Since the HTS coil has a zero resistance, power transmission loss can be minimized. At the same time, size of the current density could be increased to 100 times or more than typical coils. In addition, through impedance matching of LC device, maximal resonance properties were induced and consequently, frequency selection quality characteristics or Q was enhanced. As a result, the WPT type using the HTS coil showed a longer transmission length and better transmission efficiency compared with the WPT type using typical coils.

The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM (다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형)

  • Park, Ji-Young;Hong, Tae-Ho
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.

Effect of Genotype on Whole-body and Intestinal Metabolic Response to Monensin in Mice

  • Fan, Y.K.;Croom, W.J.;Daniel, Linda;McBride, B.W.;Koci, M.;Havenstein, G.B.;Eisen, E.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권4호
    • /
    • pp.554-562
    • /
    • 2006
  • Two lines of mice, M16 selected for rapid growth and a randomly selected control ICR as well as their reciprocal crosses were used to study the effects of genotype on whole-body energetics and intestinal responses to monensin. Six mice, eight weeks of age, from each line or reciprocal cross were assigned to one of two treatments, 1) drinking water containing 20 mmol/L monensin dissolved in 0.5% V/V ethanol, and 2) drinking water containing 0.5% V/V ethanol (control) for two weeks. After 11 days (age of 9 weeks and 4 days), whole-body $O_2$ consumption was measured. At the end of two weeks, jejunal $O_2$ consumption, intestinal tissue composition and histomorphometrics as well as the rate and efficiency of glucose absorption were estimated. In comparison with the control, monensin administration in drinking water resulted in less daily water intake (13.4 vs. 15.5 ml/mouse, p<0.01), less protein to DNA ratio of jejunal mucosa (5.41 vs. 6.01 mg/mg, p<0.05), lower villus width (88 vs. $100{\mu}m$, p<0.05), and less jejunal tissue $O_2$ consumption enhancement by alcohol (7.2 vs. 10.5%, p<0.01) in mice. Other than those changes, monensin had little (p>0.05) effect on variables measured in either line of mice or their reciprocal cross. In contrast, the M16 line, selected for rapid growth, as compared to the ICR controls or the reciprocal crosses, had less initial (pre-monensin treatment) whole-body $O_2$ consumption per gram of body weight (1.68 vs. $2.11-2.34{\mu}mol/min{\cdot}g$ BW, p<0.01) as compared to the ICR and reciprocal crosses. In addition, the M16 mice exhibited greater growth (412 vs. 137-210 mg/d, p<0.05), better feed efficiency (41.7 vs. 19.9-29.3 mg gain/g feed, p<0.05), shorter small intestines adjusted for fasted body weight (1.00 vs. 1.22-1.44 cm/g FBW, p<0.05), wider villi (109 vs. $87-93{\mu}m$, p<0.05), more mature height of enterocytes (28.8 vs. $24.4-25.1{\mu}m$, p<0.05) and a lower rate (91 vs. $133-145{\eta}mol\;glucose/min{\cdot}g$ jejunum, p<0.05) and less energetic efficiency (95 vs. $59-72{\eta}mol$ ATP expended/${\eta}mol$ glucose uptake, p<0.05) of glucose absorption compared to the ICR line and the reciprocal cross. Monensin had little (p>0.05) effect on whole-body $O_2$ consumption and jejunal function, whilst selection for rapid growth resulted in an apparent down-regulation of intestinal function. These data suggest that genetic selection for increased growth does not result in concomitant changes in intestinal function. This asynchrony in the selection for production traits and intestinal function may hinder full phenotypic expression of genotypic growth potential.

Selection Efficiency for Protein Content and Sedimentation Value in Progenies of Hybridized Wheat (밀 잡종 후기 세대에서 단백질 함량 및 경, 연질의 선발 효과)

  • 송현숙;이홍석
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • 제38권1호
    • /
    • pp.8-14
    • /
    • 1993
  • To investigate selection efficiency for protein content and hardness in a wheat breeding program, two crosses were made between soft wheat (SW) ‘Chokwang’ and hard wheat (HW) ‘Lancota’, and between HW ‘Suwon 210’ and SW ‘Atlas 66’. F2 progeny lines from the crosses were separated into 4 groups as HW + high protein (HP), HW + low protein (LP), SW + HP and SW + LP by measuring protein content and sedimentation value in F4 generation. The subsequent populations were tested for protein content, sedimentation value, mixogram pattern and bread quality. HP group selected from F4 again had a higher protein content in F5 generation than LP group, but there was no significant difference between two groups in F6 generation. In sedimentation value, the significant difference was recognizable only between the groups of HW + HP and. SW + LP. Plant based investigation in F6 revealed that the distribution pattern for protein content and sedimentation value shifted from the low to high by the four groups with the order of SW + LP, HW + LP, SW + HP, HW + HP. Such a trend was most noticeable in the progenies of the cross between ‘Suwon 210’ and ‘Atlas 66’. Mixogram pattern that shows flour characteristics differed greatly among the groups, indicating a high selection efficiency for the traits. Bread volume in F6 of HW + HP was found to be higher than that of SW + LP, only from the cross between ‘Suwon 210’ and ‘Atlas 66’.

  • PDF

Application of Newly PAC Selection Method Based on Economic Efficiency (경제성을 고려한 새로운 PAC 선정방법의 적용)

  • Kim, Young-Il;Bae, Byung-Uk
    • Journal of Korean Society of Environmental Engineers
    • /
    • 제28권11호
    • /
    • pp.1141-1147
    • /
    • 2006
  • In order to applicate a newly method for powdered activated carbon(PAC) selection based on economic efficiency, PAC adsorption tests were performed for removal of MIB and dissolved organic carbon(DOC) in drinking water supplies. The removal rate of MIB increased when the PAC dose increased. The Coal-based PACs were superior for adsorption of MIB compared to wood-based PACs. PAC adsorption of DOC and $UV_{254}$ were a little different for different PACs and types of raw water, but both were lower than adsorption of MIB. Among the tested PACs, the one called P-1000 was most effective for removal of MIB, DOC and $UV_{254}$. Most of the organics in the tested samples were proven by excitation emission matrix(EEM) results to be fulvic-like materials. Especially, fulvic-like materials, humic-like materials, and soluble microbial byproduct(SMP)-like materials decreased after contact with PAC. P-1000 which had the lowest MIB cost index(MCI) was selected as the optimum PAC for the target water. PAC efficiency and treatability, particle size and distribution, and the cost associated with PAC dosing for MIB removal according to DOC concentration should all be considered before making the final selection of the best PAC for the target water.

Analysis of Vehicle Selection Factors Using Energy Census (에너지총조사를 이용한 차량 선택 요인 분석)

  • Shin, Him Chul;Won, DooHwan
    • Environmental and Resource Economics Review
    • /
    • 제31권2호
    • /
    • pp.291-317
    • /
    • 2022
  • This study tried to analyze the factors affecting consumers' vehicle selection for the spread of eco-friendly vehicles. We used the energy census data for this purpose, and although the energy census collects useful information from a large number of samples, it has been limitedly used to create simple statistics in many cases. Based on 2,771 transport sector microdata from the 2017 Energy Census, we collected vehicle price, fuel efficiency, and number of vehicle models, which are alternative characteristic variables that change according to consumers' choice, and converted and analyzed data to enable conjoint analysis. The analysis results in two-folds. First, it was confirmed that the official fuel efficiency of a vehicle and the fuel cost, which is affected by changes in the relative price of each fuel, are important variables in selecting an eco-friendly vehicle. In order to achieve the goal of spread of eco-friendly vehicles, it is necessary to develop technologies to improve fuel efficiency and set appropriate electric rates for charging electric vehicles. Second, an increase in the number of vehicle models through the expansion of the eco-friendly car industry and market also affects consumers' choice of eco-friendly vehicles, so efforts to expand the supply of eco-friendly vehicles will be an important factor. In addition, it is also significant that this study showed that the use of the energy census can be diversified by deriving meaningful policy implications using the results of the energy census periodically conducted in the country without a separate survey.

Study on the Selection of Optimal Operation Position Using AI Techniques (인공지능 기법에 의한 최적 운항자세 선정에 관한 연구)

  • Dong-Woo Park
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • 제29권6호
    • /
    • pp.681-687
    • /
    • 2023
  • The selection technique for optimal operation position selection technique is used to present the initial bow and stern draft with minimum resistance, for achievingthat is, the optimal fuel consumption efficiency at a given operating displacement and speed. The main purpose of this studypaper is to develop a program to select the optimal operating position with maximum energy efficiency under given operating conditions based on the effective power data of the target ship. This program was written as a Python-based GUI (Graphic User Interface) usingbased on artificial intelligence techniques sucho that ship owners could easily use the GUIit. In the process, tThe introduction of the target ship, the collection of effective power data through computational fluid dynamics (CFD), the learning method of the effective power model using deep learning, and the program for presenting the optimal operation position using the deep neural network (DNN) model were specifically explained. Ships are loaded and unloaded for each operation, which changes the cargo load and changes the displacement. The shipowners wants to know the optimal operating position with minimum resistance, that is, maximum energy efficiency, according to the given speed of each displacement. The developed GUI can be installed on the ship's tablet PC and application and used to determineselect the optimal operating position.

Plant Species Selection Program for Ecological Restoration of Coastal Reclaimed Land -Focused on the Dumped Soil Area at Inchon Airport- (해안간척지의 생태적 환경복원을 위한 식물 선정에 관한 연구 -인천공항 사토장지역을 중심으로-)

  • Bae, Young-Hun;Lee, Dong-Kun
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • 제4권3호
    • /
    • pp.66-74
    • /
    • 2001
  • The main purpose of this thesis is to select the appropriate plants for the ecological restoration of coastal land. The soil and vegetation environment survey of the beach where the halophytes live now was executed for the sake. Firstly, the soil survey was done by the physical and chemical survey of beach soil and dumped soil. The soil is mostly sandy loam and sandy clay loam which has silty much. The beach soil where the salt plants live has more organic matters in the content than dumped soil because of the influx of the dead halophytes, a pioneer plant to this area. Secondly the vegetation survey was executed by the halophytes survey in the beach area in order to select the appropriate plants for ecological restoration. The shows two different areas in the vegetation divided by the salt density of soil. Artemisia fukudo, Juncus haenkei, Carex pumila, Silene armeia, Polyponum aviculare etc live in the less salt density area and it doesnt show collected. Salicornia herbacea, Suaeda asparagoides, Aster tripolium, Limonium tetragonum, Suaeda maritima, Scirus fluvitilis, Phragmtes communis, Suaeda japonica, Zoysia sinica etc halophytes live in the more salt density area and there are a few advent plant but many collected. So the salt density of soil limits the vegetation. The selection of appropriate plants for the ecological restoration programs was designed with 3 different standards considering the salt density of soil in the dumped soil area. The plan selection guidelines of thick salt density due to the salt density of soil, and economical efficiency and maintenance because the area is large. The guidelines of middle salt density area were made considering economical efficiency and maintenance because there are salt as well, and it is effective for the scenery if they have normal ecology but their leaves have good color and the flowers are beautiful. However I suggest beautiful flowery plants for the neutral plan area because this area is the entry point of the airport so the view is very important.

  • PDF

Dynamic States Consideration for Next Hop Nodes Selection Method to Improve Energy Efficiency in LEAP based Wireless Sensor Networks (LEAP기반의 무선 센서 네트워크에서 가변적 상태를 고려한 에너지 효율적 다음 홉 노드 선택 기법)

  • Nam, Su-Man;Cho, Tae-Ho
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • 제23권6호
    • /
    • pp.558-564
    • /
    • 2013
  • Wireless sensor networks (WSNs) contain limited energy resources and are left in open environments. Since these sensor nodes are self-operated, attacks such as sinkhole attacks are possible as they can be compromised by an adversary. The sinkhole attack may cause to change initially constructed routing paths, and capture of significant information at the compromised node. A localized encryption and authentication protocol (LEAP) has been proposed to authenticate packets and node states by using four types of keys against the sinkhole attack. Even though this novel approach can securely transmits the packets to a base station, the packets are forwarded along the constructed paths without checking the next hop node states. In this paper, we propose the next hop node selection method to cater this problem. Our proposed method evaluates the next hop node considering three factors (i.e., remaining energy level, number of shared keys, and number of filtered false packets). When the suitability criterion for next hop node selection is satisfied against a fix threshold value, the packet is forwarded to the next hop node. We aim to enhance energy efficiency and a detour of attacked areas to be effectively selected Experimental results demonstrate validity of the proposed method with up to 6% energy saving against the sinkhole attack as compared to the LEAP.