• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.174-175
• /
• 2005

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1517-1524
• /
• 2022

In this paper, we consider a heterogeneous network (HetNet) consisting of one macro base station and multiple small base stations, and assume the coordinated multi-point transmission between the base stations. In addition, we assume that the channel between the base station and the user consists of path loss and Rayleigh fading. Under these assumptions, we present the energy efficiency (EE) achievable by the user for a given base station and we formulate an optimization problem of dynamic cell selection and transmit power allocation to maximize the total EE of the HetNet. In this paper, we propose an unsupervised deep learning method to solve the optimization problem. The proposed deep learning-based scheme can provide high EE while having low complexity compared to the conventional iterative convergence methods. Through the simulation, we show that the proposed dynamic cell selection scheme provides higher EE performance than the maximum signal-to-interference-plus-noise ratio scheme and the Lagrangian dual decomposition scheme, and the proposed transmit power allocation scheme provides the similar performance to the trust region interior point method which can achieve the maximum EE.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.56-62
• /
• 2023

Transgenic lilies have been obtained using Agrobacterium tumefaciens (AGL1) with the plant scale explants, followed by DL-phosphinothricin (PPT) selection. In this study, scales of lily plants cv. "red flame" were transformed with the pCAMBIA3301 vector containing the gus gene as a reporter and the blpR gene as a selectable marker, as well as a gene of interest showing herbicide tolerance, both driven by the CaMV 35S promoter. Using a 20-minute infection time and a 5-day cultivation period, factors that optimized and demonstrated a high transformation efficiency were achieved. With these conditions, approximately 22-27% efficiency was observed for Agrobacterium-mediated transformation in lilies. After transformation with Agrobacterium, scales of lilies were transferred to MS medium without selective agents for 2 weeks. They were then placed on selection MS medium containing 5 mg/L PPT for a month of further selection and then cultured for another 4-8 weeks with a 4-week subculture regime on the same selection medium. PPT-resistant scales with shoots were successfully rooted and regenerated into plantlets after transferring into hormone-free MS medium. Also, most survived putatively transformed plantlets indicated the presence of the blpR gene by PCR analysis and showed a blue color indicating expression of the gus gene. In conclusion, when 100 scales of lily cv. "red flame" are transformed with Agrobacterium, approximately 22-27 transgenic plantlets can be produced following an optimized protocol. Therefore, this protocol can contribute to the lily breeding program in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.281-289
• /
• 2016

Spinyhead sculpin Dasycottus setiger, a species of cold water fish, is distributed along the eastern coastal waters of Korea. A series of fishing experiments was carried out in the waters near Uljin from June, 2002 to November, 2004, using the experimental monofilament gill nets of different mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) to describe the selectivity of the gill net for the fish. The SELECT (Share Each Length's Catch Total) analysis with maximum likelihood method was applied to fit the different functional models (normal, lognormal, and bi-normal models) for selection curves to the catch data. The bi-normal model with the fixed relative fishing intensity was selected as the best-fit selection curve by AIC (Akaike's Information Criterion) comparison. For the best-fit selection curve, the optimum relative length (the ratio of fish total length to mesh size) with the maximum efficiency and the selection range ($R_{50%,large}-R_{50%,small}$) of 50% retention were obtained as 2.363 and 0.851, respectively. The ratios of body girth to mesh perimeter at 100% retention where the selection curve of each mesh size represented the optimum total length were calculated as the range of 0.86 ~ 0.87.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.19-25
• /
• 2008

When there are numerous wireless communication systems co-existing in the limited available frequency resource, an unexpected time delay can be caused during the system switching. So, in order to reduce this time delay, a mode selection method is required. In this paper, we propose a mode selection method to minimize the time delay for multi-system wireless communication systems. For the sake of efficiency, the mode selection method is designed by analyzing the preamble characteristics of different standards. Instead of performing a full search, we propose the preamble partial search to reduce the time delay to a minimum. Simulated with Matlab in an additive white Gaussian noise(AWGN) environment with a signal to noise ratio(SNR) of 10dB and bit error rate(BER) of $10^{-6}$, we evaluated and showed the performance improvement gained by using our proposed mode selection method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.401-401
• /
• 2009

Recently, demands for the development of compact, lightweight power supplies with higher power density and higher efficiency have been increased. Since Piezoelectric Transformer (PT) was emerged in device and material industry, it has been suggested as a viable alternative to the magnetic transformer in some applications. PT has some advantages such as low profile and mechanical energy transfer with little electromagnetic interface (EMI). Also, PT can provide high voltage stepping ratio with good isolation and requires no copper windings saving copper usage especially for large voltage conversion differences. Conventional control of PT converter has mainly two-way. One is the pulse frequency modulation (PFM) control method and the other is the pulse width modulation (PWM) control with frequency fixed method. It is known that the maximum PT efficiency can be obtained when it operates near the resonant frequency of the PT. And, also PT's resonant frequency moves according to the load condition. Therefore, selection of PT converter control method is very difficult. This paper analyzes general piezo-electric converter modeling and proposes a guide-line to selection of control method and stabilization control.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.2
• /
• pp.98-107
• /
• 2006

This study has been made to see how much the execution results of the promotion policy for middle school teaching staffs succeeded for education development. The objects of the study are 70 physical education teachers in middle school in Busan, 2005, and the method is through questionnaires. The aim of the study is to grasp the propriety, the suitability, the effectiveness, the efficiency and the correspondence on the execution results of the promotion policy of middle schools' educational officials, and to refer to them at the policy. The conclusions are as follows:1. As to the propriety of promotion policy, it shows to have 65.8% support, so the aim selection proves not to be much unreasonable. 2. As to the suitability, it shows to have 52.5% support, so the selection of the policy ways for practicing the policy aim proves to be a little unsuitable. 3. As to the effectiveness, it shows to have 70.7% support, and the rate of support is the highest of the change factors of evaluation, so it proves to be very successful in the achievement of policy aim. 4. As to the efficiency, it shows to have 63.8% support, so the policy drive activity proves to be inefficient. 5. As to the correspondence, it shows to have 46.2% support, and it is the lowest mark of the change factors of evaluation. Therefore it proves that the favor-receiver, the physical education teachers have very low degree of good feeling.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.21-27
• /
• 2013

This paper proposes an adaptive modulation based incremental hop selection scheme which improves network coverage in half-duplex multi-hop networks. The proposed scheme guarantees wide coverage through the operation of multi-hop network while preventing spectral efficiency loss due to the usage of multiple time phases in the half-duplex protocol. Also, we evaluate the average spectral efficiency performance over Nakagami-m fading channel. The simulation results show that the proposed scheme outperforms the existing schemes and the derived evaluation is valid.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.965-968
• /
• 2008

This study is interested in modeling the selection of optimal repair materials in view of the qualitative evaluation. In order to architecting the evaluation model of various repair alternatives, Analytical hierarchy process techniques was applied to this study. It is composed of aesthetics, easy-to-application, economical efficiency, and environment-friendly properties in upper level. Among the qualitative evaluation items, Environment-friendly properties and execution cost included in economical efficiency is highly weighted. It was concluded that the evaluation model by this study is very useful to choose the best alternative among various repair materials.

• Computers and Concrete
• /
• v.11 no.6
• /
• pp.541-569
• /
• 2013

There is a wide variety of existing Genetic Algorithms (GA) operators and parameters in the literature. However, there is no unique technique that shows the best performance for different classes of optimization problems. Hence, the evaluation of these operators and parameters, which influence the effectiveness of the search process, must be carried out on a problem basis. This paper presents a comparison for the influence of GA operators and parameters on the performance of the damage identification problem using the finite element model updating method (FEMU). The damage is defined as reduction in bending rigidity of the finite elements of a reinforced concrete beam. A certain damage scenario is adopted and identified using different GA operators by minimizing the differences between experimental and analytical modal parameters. In this study, different selection, crossover and mutation operators are compared with each other based on the reliability, accuracy and efficiency criteria. The exploration and exploitation capabilities of different operators are evaluated. Also a comparison is carried out for the parallel and sequential GAs with different population sizes and the effect of the multiple use of some crossover operators is investigated. The results show that the roulettewheel selection technique together with real valued encoding gives the best results. It is also apparent that the Non-uniform Mutation as well as Parent Centric Normal Crossover can be confidently used in the damage identification problem. Nevertheless the parallel GAs increases both computation speed and the efficiency of the method.