• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.202-207
• /
• 2014

Recently, the study of energy saving technology of ships begins in earnest, as energy saving policies are performed all around the world. SEMS (Ship Energy Management System) is one of the techniques to increase energy efficiency by applying to a independent system like a ship and offshore. SEMS is composed of Cooling Pump Control System (CPCS), Renewable Energy Emergency Power Control System (REEPCS), Load Control System (LCS), and Heating, Ventilation, and Air Conditioning System (HVACS). SEMS is enable to increase energy efficiency and achieve integrated management through the interlocking of each system. Especially, it is possible to improve the flexibility of the selection of the generator capacity in conjunction with a rechargeable battery and renewable energy. In this paper, SEMS applied rechargeable battery is proposed and simulated. By applying the rechargeable battery, it was confirmed that SEMS applied rechargeable battery can be operated at optimum efficiency of the generator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.662-665
• /
• 2020

Energy Efficiency in any WSN (Wireless Sensor Network) is a critical issue to elongate the life of the batteries equipped in sensors. LEACH(Low Energy Adaptive Clustering Hierarchy) is one of the mostly used routing algorithms which reduce the amount of transmitted data and save the energy in the network. In this paper, a new technique to select channels in routing algorithms is suggested and compared with the LEACH, ALEACH and PEGASIS. This technique forms clusters depending upon the node density as the deployement of the nodes is random. As a result, the proposed algorithm presents the better performance of the energy efficiency than those of the current algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.342-349
• /
• 2007

Clustering protocol of Wireless sensor networks(WSNs) not only reducing the volume of inter-node communication by the nodes's data aggreation but also extending the nodes's sleep times by cluster head's TDMA-schedule coordination. In order to extend network lifetime of WSNs, we propose ECS algorithm to select cluster-head using three variables. It consists of initial and current energy of nodes, round information and total numbers which have been selected as cluster head until current round.

• Journal of Computing Science and Engineering
• /
• v.6 no.2
• /
• pp.89-104
• /
• 2012

In dynamic Web service environments, the performance of the Internet is unpredictable; the reliability and effectiveness of remote Web services are also unclear. Therefore, it can hardly be guaranteed that the quality of Web service (QoWS) attributes of Web services do not fluctuate with the dynamic Web service environments. When a composite service is planned in the context of dynamic service environments, there is another aspect which has not been taken into account by existing works, namely, concurrency - the fact that multiple requests to a composite service may arrive at the same time. Considering the dynamics of Web service environments and concurrency of requests, we propose in this paper a service selection scheme which adopts top-k dominating queries to generate a composition solution rather than only select the best composition solution for a given request. The experimental results have investigated the efficiency and effectiveness of our approach and shown that it outperforms baseline and traditional methods for service selection.

• IE interfaces
• /
• v.25 no.1
• /
• pp.96-105
• /
• 2012

Recently, the interoperability has become more important to enhance the net-centric capabilities of the warfighter. DITA (Defense Information Technical stAndard) is the set of IT standards for improving interoperability, scalability, effectiveness, and efficiency. In this paper, we analyzed the standardizing process to derive the selection criteria and structurized the derived selection criteria using the KJ (Kawakita Jiro) method. Finally, we developed an evaluation model for selecting a standard for DITA using AHP (Analytic Hierarchy Process). As a result, we present eight selection criteria (maintainability, trend, stability, portability, effect of other standard, constraint of the network, and applicability to the systems). We also applied some examples that several IT standards to our selection model for validating the model. We expect our model to help to decide objectively whether the new standard can be listed in DITA.

• ETRI Journal
• /
• v.42 no.1
• /
• pp.17-25
• /
• 2020

Multiple-input multiple-output systems can achieve a full sum rate (SR) via full duplex (FD). However, its performance is degraded by self-interference (SI) that occurs between the transmitter and receiver at the same node and thus is constrained by error floors. Conversely, half duplex (HD) can avoid the SI albeit at lower spectral efficiency, and the slope of its error curve is determined by the diversity order. In this study, a link selection scheme based on switching between FD and HD is examined as a simple method to improve the bit error rate (BER) performance of FD systems. In the proposed link selection algorithm, either FD or HD is selected based on the received minimum distance and signal-to-interference plus noise ratio. Simulation results indicate that the proposed hybrid FD/HD switching system offers significant BER performance improvement when compared with that of the conventional FD and FD based on only the received minimum distance under the same fixed SR. Under relatively sufficient SI cancellation, it is demonstrated to outperform the HD with a diversity advantage in low and medium signal-to-noise ratio region.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.125-129
• /
• 2015

The most important factor within the wireless sensor network is to have effective network usage and increase the lifetime of the individual nodes in order to operate the wireless network more efficiently. Therefore, many routing protocols have been developed. The LEACH protocol presented by Wendi Heinzelman, especially well known as a simple and efficient clustering based routing protocol. However, because LEACH protocol in an irregular network is the total data throughput efficiency dropped, the stability of the cluster is declined. Therefore, to increase the stability of the cluster head, in this paper, it proposes a stochastic cluster head selection method for improving the LEACH protocol. To this end, it proposes a SH-LEACH(Stochastic Cluster Head Selection Method-LEACH) that it is combined to the HEED and LEACH protocol and the proposed algorithm is verified through the simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4326-4341
• /
• 2016

In this paper, an adjustable multiple relay selection (MRS) scheme for cooperative communication with amplify-and-forward (AF) relay under frequency selective channels is proposed. In the proposed scheme, the relays are ordered firstly by the steady-state mean square error (MSE), then the relays are sequentially selected out from N relays and the number of cooperating relays is adjusted dynamically according to the steady-state mean square joint error (MSJE). The aim of this work is to dynamically estimate the optimum number N_o of cooperating relays. Optimum means the minimum number of cooperating relays, N_o, achieving the minimum level of steady-state MSJE. Numerical results verify the analyses and show that the scheme can adaptively adjust the number of cooperating relays, and outperform conventional relay selection schemes. Hence, the proposed scheme provides better tradeoff between BER performance and spectral efficiency and to save more energy in cooperative wireless networks.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.6
• /
• pp.370-376
• /
• 2016

Manufacturing data analysis and its applications are getting a huge popularity in various industries. In spite of the fast advancement in the big data analysis technology, however, the manufacturing quality data monitored from the automated inspection system sometimes is not reliable enough due to the complex patterns of product quality. In this study, thus, we aim to define the level of trusty of an automated quality inspection system and improve the reliability of the quality inspection data. By correlation analysis and feature selection, this paper presents a method of improving the inspection accuracy and efficiency in an SVM-based automatic product quality inspection system using thermal image data in an auto part manufacturing case. The proposed method is implemented in the sealer dispensing process of the automobile manufacturing and verified by the analysis of the optimal feature selection from the quality analysis results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3409-3422
• /
• 2014

The frequency spectrum available for the wireless communication is extremely crowded. In order to improve the spectral efficiency, the two-way relay networks have aroused great attention. A simple $N^{th}$ best-relay selection criterion for the opportunistic two-way relay networks is proposed, which can be implemented easily by extending the distributed timer technique in practice, since the proposed criterion is mainly based on the channel gains. The outage performance of the proposed relay selection scheme is analyzed under the outdated channel state information (CSI), and a tight closed-form lower bound and asymptotic value of the outage probability over Rayleigh fading channels are obtained. Simulation results demonstrate that the tight closed-form lower bound of the outage probability very closely matches with simulated ones in the whole SNR region, and the asymptotic results provide good tight approximations to the simulation ones, especially in the high SNR region.