• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 춘계학술대회 논문집
• /
• pp.152-157
• /
• 1995

In Turning It is good selection of cutting condition and cutting tools that influence upon the accuracy of dimension manufacturing efficiency and extension of tool life. Among them especially the identification of cutting force due to the change of cutting conditions which exerts a great influence on the turning is very important. In this study the cutting resistance due to the change of cutting conditions was caculated by using the energy method and good agreement in shown between theoritical and experimental results which were tested for the cutting resistance at the cemented carbide cutting tools with workpieces of SM20C and SM 45C.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.781-785
• /
• 2005

Cutting forces and tool deflection in end milling are represented as the closed form of tool rotational angle and cutting conditions. The discrete cutting forces caused by tool entry and exit are continued using the Fourier series expansion. Tool deflection is predicted by direct integration of the distributed loads on cutting edges. Cutting conditions, tool geometry, run-outs and the stiffness of tool clamping pan are considered for cutting forces and tool deflection estimation. Compared to numerical methods, the presented method has advantages in short prediction time and the effects of feeding and run-outs on cutting forces and tool deflection can be analyzed quantitatively. This research can be effectively used in real time machining error estimation and cutting condition selection for error minimization since the ferm accuracy is easily predicted by tool deflect ion curve.

• 한국산림과학회지
• /
• 제99권1호
• /
• pp.136-143
• /
• 2010

본 연구는 강원도 평창지역의 천연 활엽수림을 대상으로 시간 경과에 따른 택벌림화 작업지의 임분밀도와 임목본수의 변화를 파악하고, 택벌림화 작업지에 적합한 무육방법을 제시함으로써 천연 활엽수림의 경영에 필요한 정보를 제공하고자 수행하였다. 임분밀도의 조절을 위해 임분밀도지수를 사용하여 매 5년 마다 ha당 흉고단면적의 10%, 12%, 그리고 14%를 제거하는 모의시업을 시행하였다. 그 결과 택벌림화 작업지를 목표로 하는 임분으로 유도하기 위해서는 30년 정도의 정리기가 필요할 것으로 판단하였다. 최종적으로 30년이 경과하는 시점까지 각 시나리오에 따른 무육을 거치는 동안 적정 임분밀도를 유지하면서 많은 재적을 확보할 수 있는 방법을 택벌림화 작업지에 적합한 무육방법으로 판단하였다. 모의시업의 결과 매회 ha당 흉고단면적의 10%를 제거하였을 경우에는 정리기동안 임분밀도지수가 적정 수준을 초과하는 것으로 분석되었다. 반면, 매회 12%와 14%를 제거하였을 경우에는 적정 임분밀도를 유지하는 것으로 나타났다. 하지만 최종 수확시의 경제성을 고려한 결과 흉고단면적의 12%씩을 제거하는 시업강도를 적용하는 것이 가장 적합한 무육방법으로 평가되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.569-574
• /
• 2002

As consumer's desire becomes various, agility of mold manufacturing is most important factor for competence of manufacturer. In common works to use commercial CAM system to generate tool path, some decision making process is required to produce optimal result of CAM systems, The paper proposes a methodology for computer-assisted tool selection procedures for various cutting type, such as rough, semi-rough and finish cuts. The system provides assist-tool-items for machining of design model part of injection meld die by analyzing sliced CAD model of die cavity and core. Also, the generating NC-code of the tool size is used to calculate machining time. The system is developed with commercial CAM using API. This module will be used for optimization of tool selection and planning process.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.15-20
• /
• 2004

Inclined surface milling in the mould and die industries is one of the most commonly needed cutting process. For the variety and complexity of cutting characteristics in various cutting condition, it is difficult to select a optimal tool path orientation. The comparative results through FFT analysis in this study provide a guideline for the selection tool path orientation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.60-65
• /
• 1992

A hypereutectic Aluminum-Silicon Alloyis widely used in the parts of automobile because of high-resistance and good strength. In this study, the cutting of a hypereutectic A1-Si alloy (A390) for extraction of Si particle was experimentally investigatec. By proper selection of cutting tool material and optimization of cutting conditions economical machining of this alloy is achieved. The surface roughness relate closely with the feed rate and cutting speed.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.9-19
• /
• 1995

The recent development of NC lathe and machining renter have enabled automatic or unmanned manufacturing system for the improvement of production rate. And if you want to introduce automatic or unmanned manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions, rational tool grades and tool angles are necessary. As a result, the selection of cutting conditions, tool grades and tool angles are important factors to production rate.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.46-55
• /
• 1995

The recent development of NC lathe and machining center have enabled automatic or unmanned manufacturing system for the improvement of production rate. And if you want to introduce automatic or unmanned manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions, rational tool grades and tool angles are necessary. As a result, the selection of cutting conditions, tool grades and tool angles are important factors to production rate.

• 한국안전학회지
• /
• 제8권4호
• /
• pp.73-81
• /
• 1993

In recent years, mould industry in machining requires to increase machining productivity and to reduce costs, To adapt this trend it is necessary to optimize machine condition, Even though many researches in this area introduced various way to set the optimal condition, still there are not enough. Therefore this research was done to select the optimal cutting condition for industry, and to develop the computer program to select the optimal cutting condition automatically. The result of this research will contribute to increase machining productivity of various mould companies with the automatic selection of optimal cutting condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.965-969
• /
• 1997

Due to the high feed rate,high speed machining (HSM) provide a great potential of rationalization for the machining Dies and Moulds. But determination of cutting condition is very difficult, because cutting mechanism of high speed machining is very complicated,especially using ball end-mill. This paoer gives a report on selection of the optimal cutting condition to improve the machining efficiency, And optimal machining condition is determined through the cutting force, FFT analysis of cutting force and surface roughness according to the cutting condition. Based on this experiment result,wear process and machining characteristics are evaluated.