• 한국터널지하공간학회 논문집
• /
• 제24권2호
• /
• pp.153-170
• /
• 2022

워터젯은 콘크리트와 암석 절삭에 적합하며 소음과 진동이 적어 도심지 시공에 널리 활용되는 기술이다. 최근 한국원자력연구원은 처분터널 내 공학적방벽의 열-수리-역학적 복합거동 현장시험의 콘크리트 플러그를 교란 및 손상 없이 해체하기 위해 연마재 워터젯 기술을 채택 및 적용하였다. 본 연구에서는 플러그 해체를 통한 연마재 워터젯의 터널 내 적용성을 평가하였고, 절삭 결과를 개발된 절삭 모델 결과와 비교하였다. 현장 적용성에 관해서는, 워터젯 활용은 경로선택이 용이하였으며 주변부의 추가적인 교란을 발생시키지 않았다. 펌프의 소음은 공회전 시 64.9 dB로 국내 생활소음·진동의 규제기준을 만족하였으나 공중 분사 및 절삭 시에는 터널 내에서 측정되어 그 기준을 상회한 것으로 나타났다. 절삭 모델 검증을 위해 연마재 워터젯의 반복 절삭, 유량, 연마재 투입량 및 이격거리를 주요 변수로 선정하였고 절삭 모델로 계산된 절삭 부피와 측정된 부피의 오차는 1회 절삭 시 12~13%, 2회 절삭 시 16%를 보였다. 절삭 깊이와 폭은 이격거리에 큰 영향을 받았으며, 이격거리가 작을수록 오차가 감소하는 경향을 보였다.

• 동아시아식생활학회지
• /
• 제18권4호
• /
• pp.624-632
• /
• 2008

This study was conducted to estimate the drift of change for in Kimchi purchases, and to contribute to the efforts to improve the quality improvement of Kimchi sold at markets. Questionnaires were distributed to 450 adults, and 396 samples were statistically analyzed. There were significant differences in the average values of importance and satisfaction. Based on analyses of the 14 factors, the level of satisfaction was significantly lower than the level of importance. Importance-factors such as 'taste' ($4.56{\pm}0.81$) and consistency of 'quality' ($4.37{\pm}0.79$) are very important to consumers, whereas 'package volume' ($3.79{\pm}0.91$) and 'price cutting' ($3.84{\pm}1.01$) are rarely considered by consumers. Fourteen significance factors were three factors. Overall significance for selection attributes when purchasing Kimchi differed according to gender, age and marital status. Fourteen satisfaction factors were extracted to four factors. Overall satisfaction for selection attributes when purchasing Kimchi differed according to martrial status. Total satisfaction with selection attributes when purchasing the food was greatly affected by its quality and packaging. These findings confirmed that Kimchi products should be diversified and active marketing should be carried out if Kimchi is to become a global product.

• 한국정밀공학회지
• /
• 제7권3호
• /
• pp.66-74
• /
• 1990

This paper presents a knowledge-based computer aided process planning system that automatically selects machine tools, machining operations and cutting tools and determines sequences of the machining operations for prismatic parts in die manufacturing. In the proposed system, parts are described by manufacturing features and grouped into part families based on the functions. Each part is repressented by a part frame which consists of basic data and manufacturing features. Knowledge for manufacturing is acquired from the domain expert and represented by frames. A decision model for selection of machine tools, machining operations and cutting tools and for determining sequences of the machining operations are developed by employing the Mealy machine in finite automata with output. The decision procedure and the order of priority which inputs manufacturing features into the Mealy machine are represented by rule for each part family. Backward chaining is used for the proposed system. The proposed system is implemented by using TURBO-PROLOG on the IBM PC/AT. A case study for the slide core is presented to show the function of the proposed system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.373-377
• /
• 2002

In the end milling operation the deflection of the cutter is an important factor affecting the accuracy of machining with implications on the selection of cutting parameters and economics of the operation. The deflection of the end mill was studied both experimentally with strain gauge, tool dynamometer, laser measuring apparatus and on a finite element model of the cutting using ANSYS software. The deflection of machining tool with various helix angles was studied with FEM simulation and experiment. ANSYS analysis performed on the finite element model of the end mill provides deflection results which agree within 15.0% with the experimental ones.

• 대한산업공학회지
• /
• 제23권1호
• /
• pp.39-54
• /
• 1997

This paper presents four process models for machining processes : 1) an economical mathematical model of machining process, 2) a prediction model for surface roughness, 3) a decision model for fuzzy cutting conditions, and 4) a judgment model of machinability with automatic selection of cutting conditions. Each model was developed the economic machining, and these models were applied to theories widely studied in industrial engineering which are nonlinear programming, computer simulation, fuzzy theory, and neural networks. The results of this paper emphasize the human oriented domain of a nonlinear programming problem. From a viewpoint of the decision maker, fuzzy nonlinear programming modeling seems to be apparently more flexible, more acceptable, and more reliable for uncertain, ill-defined, and vague problem situations.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1885-1890
• /
• 2005

The contour method relies on deformations that occur when a residually stressed component is cut along a plane. The method is based on the elastic superposition principle. When plasticity is involved in the relaxation process, stress error in the resulting measurement of residual stress would be caused. During the cutting the specimen is constrained at a location along the cut so that deformations are restrained as much as possible during cutting. With proper selection of the constraining location the plasticity effect can also be minimized. Typical patterns of longitudinal welding residual stress state were taken to assess the plasticity effect along with constraining locations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.485-491
• /
• 1999

A burr is formed in every corner of parts as a result of machining, which produces undesirable edge geometry and influence deeply to surface quality of workpiece. Therefore these burrs must be removed certainly. The cost of removing these burrs is directly proportional to their size. Burrs have been among the most troublesome obstruction to high productivity and automation of machining processes. The proper selection of cutting condition and tool geometry will be helpful to reduce the occurrence of burrs. In paper will observe burr formation along helix angle in end milling and certificate experimentally mechanics relation of helix angle and burr formation.

• 통상정보연구
• /
• 제11권3호
• /
• pp.75-100
• /
• 2009

With the change of various business environments, needs for the third party logistics(3PL) service are strategically considered for securing core competitiveness of manufacturers in China. Thus, manufacturers not only have worked with 3PL service providers for cutting costs of logistics, but also they are willing to have Win-Win relationship with the 3PL service provider. In this paper, comparing situation and characteristics of both China and developed-countries, especially in the particularity of manufacturing companies in China. The most important thing is that 3PL service providers must be able to manage supply chain of manufacturers with logistic planning abilities and to operate logistics services with logistic infrastructures and IT systems. In the view of long-term development, incubating logistics specialists is also the influencing fact that makes 3PL service providers more competitive with high quality logistics service and infrastructures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1003-1007
• /
• 2003

In order to improve the international competitiveness of ferrule industry, the core technology of the second stage for ferrule grinding system is under developing. A high speed (10,000RPM) and high precision spindle system(Radial Runout 0.2 micrometer) bearing more cutting torque and force is designed considering the limitation of cost and size, the effect of heat, and various work-piece materials. A CAE software for machine elements and general machine system is used for preliminary evaluation and selection of design parameters. A dedicated program for the analysis of spindle system is used for final evaluation and selection of design parameter. The process how to evaluate and select using such tools are presented.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.55-63
• /
• 1991

This paper deals with development of a Computer Aided Process Planning System based on knowledge base in addition to database for injection mold as a part of Computer Integrated Manufacturing System for injection mold manufacture. The prposed system consists of four modules such as manufacturing feature code generation module machine tool selection and sequencing module, operation and cutting tool selection mudule and standard time estimation module. The system is programmed by using Turbo Pascal on the IBM-PC/AT. The performance of the system is evaluated by using real problems and the test results indicate that the proposed system is a practical and efficient system.