• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.365-368
• /
• 2001

This paper described a design and implementation of the division/square-root for a redundant floating point binary number using high-speed quotient selector. This division/square-root used the method of a redundant binary addition with 25MHz clock speed. The addition of two numbers can be performed in a constant time independent of the word length since carry propagation can be eliminated. We have developed a 16-bit VLSI circuit for division and square-root operations used extensively in each iterative step. It peformed the division and square-root by a redundant binary addition to the shifted binary number every 16 cycles. Also the circuit uses the nonrestoring method to obtain a quotient. The quotient selection logic used a leading three digits of partial remainders in order to be implemented in a simple circuit. As a result, the performance of the proposed scheme is further enhanced in the speed of operation process by applying new quotient selection addition logic which can be parallelly process the quotient decision field. It showed the speed-up of 13% faster than previously presented schemes used the same algorithms.

• Journal of Ship and Ocean Technology
• /
• v.8 no.2
• /
• pp.41-60
• /
• 2004

Ship design process requires lots of complicated analyses for determining a large number of design variables. Due to its complexity, the process is divided into several tractable designs or analysis problems. The interdependent relationship requires repetitive works. This paper employs collaborative optimization (CO), one of the multidisciplinary design optimization (MDO) techniques, for treating such complex relationship. CO guarantees disciplinary autonomy while maintaining interdisciplinary compatibility due to its bi-level optimization structure. However, the considerably increased computational time and the slow convergence have been reported as its drawbacks. This paper proposes the use of an approximation model in place of the disciplinary optimization in the system-level optimization. Neural network classification is employed as a classifier to determine whether a design point is feasible or not. Kriging is also combined with the classification to make up for the weakness that the classification cannot estimate the degree of infeasibility. For the purpose of enhancing the accuracy of a predicted optimum and reducing the required number of disciplinary optimizations, an approximation management framework is also employed in the system-level optimization.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.739-744
• /
• 2013

Recently, railroad construction becomes an alternative considering environmental merits such as mass transportation, safety, economy and energy efficiency. Also railroad can have 3 to 4 times better in economy compared to road construction. However, long line and unavoidable sensitive areas hinders railroad construction often resulted in ecosystem degradation. This paper reviewed 27 cases of EIS submitted during 2003-2006 and reviewed major issues on Animal-Plants and Landscape. Noise-Vibration (13.5%), Water Quality (13.5%), Wastes (10.8%) appeared to be most frequent factors to supplement. Route selection in the railroad is the most sensitive issues so that public participation and hearing should be involved in the early stage of the process and social and cultural factors also must be considered to make a final decision on the railroad route location and selection.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.2
• /
• pp.73-88
• /
• 2012

Even though the final source selection of foreign weapon system purchase project in defense area is the most important phase, the standard evaluation index has not been developed. This paper provides an appropriate evaluation index using DEMATEL and ANP methods. First, the all possible evaluation criteria applied to the relevant previous literatures in domestic and overseas researches are derived and classified into groups. Second, DEMATEL method is used to determine the network structure representing the relations of cause and effect between groups and their sub-criteria. If isolated factors, not connected with other factors, are existed in the network structure, all factors except for the isolated ones are grouped as one large factor so that the independency between those ones is maintained. The weights of criteria are determined using AHP method if the criteria are independent relation and ANP method if the criteria are networked. The weights of higher and lower level criteria are then integrated and distributed as a point with respect to the decision making purpose. The developed evaluation index can be used as a standard one in various foreign weapon system purchase projects in defense area.

• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.289-297
• /
• 2007

Color image scale captures the knowledge of colorists and represents both adjectives and colors in the same adjective image scales in order to select color(s) corresponding to an adjective. Due to the difficulty of psychological experiment and statistical analysis, in general, only a limited number of colors are located in the color image scales. This can make color selection process hard especially to non-expert. In this paper, we propose an interpolation of color image scale based on the fuzzy K-nearest neighbor method, which provides continuous colors according to the coordinates of the image scales. The experimental results show that the interpolated image scales can be practically useful for color selection process.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.11-19
• /
• 2017

The decision-making process is the act of finding the best solution among various alternatives through comparison between various criteria based on objectives of the project, evaluation standard, and conditions. However, in practice it is not easy to simply decide the optimum decision, especially for selecting malfunctioning reservoirs because no systematic evaluation criteria or standard assessment process are available. Therefore, this study adopted AHP method, which is a MCDM (multi-criteria decision making technique) to identify the malfunctioning reservoirs for efficient management of reservoirs. Important criteria of the selection of malfunctioning reservoirs and priority weights of each criteria were determined based on results of expert's survey under a stepwise hierarchical approach. The most important factor for the decision of malfunctioning reservoirs was obtained as Reservoir efficiency among the selected criteria including Reservoir efficiency decrease, Disaster Risk, Reservoir efficiency, Available water storage, Future water demand, Resident Needs. The AHP technique was applied on 11 reservoirs in Andong region to verify its applicability. Scoring method was applied for the comparison with the results of AHP method.

• Transactions of Materials Processing
• /
• v.13 no.8
• /
• pp.689-695
• /
• 2004

This paper is concerned with the analysis of the forming load characteristics of a forward-backward can extrusion process. The analysis in this paper is extended to the selection of press frame capacity for producing efficiently final product at low cost. The possible extrusion processes to shape a forward-backward can part with different outer diameters are categorized to investigate quantitatively the forming load, forming energy and maximum pressure exerted on the die-material interface. The categorized processes are composed of combined and/or some basic extrusion processes. After the analysis of the forming load characteristics, the frame capacity of press suitable for a selected process could be determined along with securing the load capacity and with considering productivity. In addition, it is also suggested that different load capacities be selected for different dimensions of a part such as the wall thickness in forward direction. The work in this paper could be a good reference for analysis of complex extrusion and selection of proper frame capacity of press to achieve low production cost and thus high productivity.

• Asia pacific journal of information systems
• /
• v.8 no.1
• /
• pp.43-64
• /
• 1998

Cooperative query answering is a research effort to develop a fault-tolerant and intelligent database system using the semantic knowledge base constructed from the underlying database. Such knowledge base has two aspects of usage. One is supporting the cooperative query answering process for providing both an exact answer and neighborhood information relevant to a query. The other is supporting ongoing maintenance of the knowledge base for accommodating the changes in the knowledge content and database usage purpose. Existing studies have mostly focused on the cooperative query answering process but paid little attention to the dynamic knowledge base maintenance. This paper proposes a multi-level knowledge representation framework called Knowledge Abstraction Hierarchy(KAH) that can not only support cooperative query answering but also permit dynamic knowledge maintenance, On the basis of the KAH, a knowledge abstraction database is constructed on the relational data model and accommodates diverse knowledge maintenance needs and flexibly facilitates cooperative query answering. In terms of the knowledge maintenance, database operations are discussed for the cases where either the internal contents for a given KAH change or the structures of the KAH itself change. In terms of cooperative query answering, four types of vague queries are discussed, including approximate selection, approximate join, conceptual selection, and conceptual join. A prototype system has been implemented at KAIST and is being tested with a personnel database system to demonstrate the usefulness and practicality of the knowledge abstraction database in ordinary database application systems.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• v.1 no.1
• /
• pp.9-27
• /
• 2013

Nagra was established in 1972 by the Swiss nuclear power plant operators and the Federal Government to implement permanent and safe disposal of all types of radioactive waste generated in Switzerland. The Swiss Nuclear Energy Act specifies that these shall be disposed of in deep geological repositories. A number of different geological formations and sites have been investigated to date and an extended database of geological characteristics as well as data and state-of-the-art methodologies required for the evaluation of the long-term safety of repository systems have been developed. The research, development, and demonstration activities are further supported by the two underground research facilities operating in Switzerland, the Grimsel Test Site and the Mont Terri Project, along with very active collaboration of Nagra with national and international partners. A new site selection process was approved by the Federal Government in 2008 and is ongoing. This process is driven by the long-term safety and feasibility of the geological repositories and is based on a step-wise decision-making approach with a strong participatory component from the affected communities and regions. In this paper a brief history and the current status of the Swiss radioactive waste management program are presented and special characteristics that may be useful beyond the Swiss program are highlighted and discussed.

• Journal of the Korean Society for Library and Information Science
• /
• v.8
• /
• pp.233-263
• /
• 1981

The purpose of this study is to bring out the most reasonable and feasible evaluation methods of research library collection in Korea. At the very outset, writer tried to define the purpose and the necessity of collection evaluation. Writer described a collection evaluation is to gain the data for decision making on selection policy, weeding and storage project, and explained it is one of the procedures of a collection development system operation of being explained as repeated three procedures through a collection development plan, an implimentation of the set plan(selection process) and a collection evaluation. Writer also pointed out the fact many libraries in Korea are apt to by pass or overlook this important process. Writer then defined the criteria of a collection evaluation as the measurement of the proportion of library holding's capability to meet users' demands and that of the degree of total collection's utilization. Writer introduced and analysed seven existing collection evaluation methods and concluded the method by a survey of users' needs and opinion and the method by a circulation survey are the most feasible and reasonable methods that can be applied. Writer also added that using above two evaluation methods together can enhance the effectiveness of collection evaluation.