• 대한토목학회논문집
• /
• 제29권2A호
• /
• pp.131-143
• /
• 2009

지진하중과 같은 횡하중에 대하여 교량구조물의 아칭작용은 교대 사이의 상부구조에 의해 발생하며 이를 상부구조의 저항능력이라고도 한다. 교량구조물의 아칭작용의 크기는 경간의 수에 영향을 받으며 또한 상부구조, 교대와 교각의 연결조건 및 상부구조와 하부구조의 강성비에도 영향을 받는다. 프리캐스트 콘크리트 상자형 교량의 비탄성 지진응답에 대한 아칭작용의 영향을 분석하기 위하여 경간수에 따른 두 가지 종류의 예제교량(교량 SB와 교량 LB), 교각의 높이의 배열에 따른 세가지 종류(대칭, 비대칭)의 교량, 상부구조와 하부구조의 연결조건에 따른 세가지 교량(형식 A, B, C)등에 대한 구분을 조합하여 18가지 종류의 예제구조물을 작성하였으며, 이 예제구조물들에 대하여 역량스펙트럼해석, 비탄성 시간이력해석을 수행하여 지진응답을 비교하여 아칭작용의 영향을 분석하였다. 아칭작용의 영향(최대변위의 감소와 저항능력의 증가)은 교량 SB(short bridge)의 경우가 교량 LB(long bridge) 보다 크게 나타났으며 대칭교량의 경우가 비대칭교량에 비하여 크게 나타남을 알수 있었다.

• Geomechanics and Engineering
• /
• 제36권3호
• /
• pp.303-316
• /
• 2024

Seismic records are composed of mainshock and a series of aftershocks which often result in the incremental damage to underground structures and bring great challenges to the rescue of post-disaster and the repair of post-earthquake. In this paper, the repetition method was used to construct the mainshock-aftershocks sequence which was used as the input ground motion for the analysis of dynamic time history. Based on the Daikai station, the two-dimensional finite element model of soil-station was established to explore the failure process of station under different seismic precautionary intensities, and the concept of incremental damage of station was introduced to quantitatively analyze the damage condition of structure under the action of mainshock and two aftershocks. An arc rubber bearing was proposed for the shock absorption. With the arc rubber bearing, the mode of the traditional column end connection was changed from "fixed connection" to "hinged joint", and the ductility of the structure was significantly improved. The results show that the damage condition of the subway station is closely related to the magnitude of the mainshock. When the magnitude of the mainshock is low, the incremental damage to the structure caused by the subsequent aftershocks is little. When the magnitude of the mainshock is high, the subsequent aftershocks will cause serious incremental damage to the structure, and may even lead to the collapse of the station. The arc rubber bearing can reduce the damage to the station. The results can offer a reference for the seismic design of subway stations under the action of mainshock-aftershocks.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.317-323
• /
• 2011

본 논문에서는 원자력 발전소 폴라 크레인(polar crane)의 설계를 위해 유한요소법을 통한 내진해석을 수행하였다. 모드 해석(modal analysis)을 통하여 폴라 크레인의 고유진동수와 진동형상을 파악하고 응답스펙트럼(response spectrum)을 통해 폴라 크레인의 내진 안전성을 평가하였다. 그리고 액체저장탱크에 대한 내진해석을 유한요소법을 이용하여 수행하였는데, 탱크가 요동시에 액체가 탱크 외벽에 가하는 힘을 고려한 슬로싱해석과 안전정지지진 하중 조건에서의 해석을 수행하였다. 본 논문에서 유한요소해석 상용코드인 ANSYS를 이용하여 내진해석에 필요한 해석기법과 과정 등을 설계 시에 활용할 수 있도록 제안하였다.

• 기술사
• /
• 제25권4호
• /
• pp.102-108
• /
• 1992

This study was carried to find out the soil characteristics of landslide site and to develope landslide prediction method by seismic refraction prospecting. For these aims, landslide condition and travel time were investigated at 68 Landslide sites over the country during 1990 to 1991. The results were as follows. 1. The surface of rupture was included mainly in C layer. Its Hardness was less than 3kg / $\textrm{cm}^2$ at the upper pare of landslide. 2. When the profile line length was 20m, the range of travel time was 40 to 90 msec. The travel time did not differ between bedrocks. 3. Refraction distance ranged from 1 to 7m and mean of that was 2.5m. Travel time was increased according to receiving distance without large variance in the refraction distance but that was appeared large variance out of the refraction distance on slope that has shallow soil depth and discontinuous ground surface. Therefore, the spread distance must be shorten to 10-l5m. 4. The seismic velocity at the first layer(layer of rupture) was less than 500m1sec by degree of weathering and the velocity at the second layer decreased in order of Granite> Granitic gneiss >Sedimentary rock. 5. The first layer observed by seismic refraction was contained C layer that has parent material and weathered rocks of hardness 10-20kg/$\textrm{cm}^2$. 6. Among the range of seismic velocity was less than 200m/sec in 63% of the total plots, 200-300m/sec in 34% and 300-500m /sec in 3%. 7. There was a proportional relationship between seismic prospecting soil depth and executive soil depth, and seismic propection soil depth was about 10 to 20cm deeper than the order.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.113-127
• /
• 2020

In this study, the behavior of external beam-column joints reinforced by plain and deformed bars with non-seismic reinforcement details is investigated and compared. The beam-column joints represented in this study include a benchmark specimen by seismic details in accordance with ACI 318M-11 requirements and four other deficient specimens. The main defects of the non-seismic beam-column joints included use of plain bar, absence of transverse steel hoops, and the anchorage condition of longitudinal reinforcements. The experimental results indicate that using of plain bars in non-seismic beam-column joints has significantly affected the failure modes. The main failure mode of the non-seismic beam-column joints reinforced by deformed bars was the accumulation of shear cracks in the joint region, while the failure mode of the non-seismic beam-column joints reinforced by plain bars was deep cracks at the joint face and intersection of beam and column and there was only miner diagonal shear cracking at the joint region. In the other way, use of plain bars for reinforcing concrete can cause the behavior of the substructure to be controlled by slip of the beam longitudinal bars. The experimental results show that the ductility of non-seismic beam-column joints reinforced by plain bars has not decreased compared to the beam-column joints reinforced by deformed bars due to lack of mechanical interlock between plain bars and concrete. Also it can be seen a little increase in ductility of substructure due to existence of hooks at the end of the development length of the bars.

• 한국터널지하공간학회 논문집
• /
• 제22권3호
• /
• pp.311-321
• /
• 2020

본 연구에서는 쉴드 터널 세그먼트 라이닝의 한계상태설계 시 세그먼트 라이닝에 작용하는 지진하중에 대한 변동계수를 산정하였다. 지반 정수의 통계적 특성치는 국내 지반의 확률특성치를 분석하여 단위중량에 대한 통계적 특성치를 산정하였으며, 전단탄성파 속도를 산정하기 위해 N값과 확률 특성치를 이용하였다. 지진하중 효과에 대한 변동계수를 산정하기 위하여 MCS기법을 적용하였으며, 지진하중 효과 산정에는 closed-form식을 적용하였다. 변동계수 산정결과, 풍화토 지반에서 지진하중 효과의 변동계수는 0.06~0.15의 범위로 분석되었고, 변동계수는 지진을 고려한 쉴드 터널의 한계상태설계 시 기본자료로 활용할 수 있을 것으로 판단된다.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.1-19
• /
• 2019

The aim of the paper is the prediction of the seismic collapse mode of steel storage pallet racks under seismic loads. The attention paid by the researchers on the behaviour of the industrial steel storage pallets racks is increased over the years thanks to their high dead-to-live load ratio. In fact, these structures, generally made by cold-formed thin-walled profiles, present very low structural costs but can support large and expensive loads. The paper presents a prediction of the seismic collapse modes of multi-storey racks. The analysis of the possible collapse modes has been made by an approach based on the kinematic theorem of plastic collapse extended to the second order effects by means of the concept of collapse mechanism equilibrium curve. In this way, the dissipative behaviour of racks is determined with a simpler method than the pushover analysis. Parametric analyses have been performed on 24 racks, differing for the geometric layout and cross-section of the components, designed in according to the EN16618 and EN15512 requirements. The obtained results have highlighted that, in all the considered cases, the global collapse mechanism, that is the safest one, never develops, leading to a dangerous situation that must be avoided to preserve the structure during a seismic event. Although the studied racks follow all the codes prescriptions, the development of a dissipative collapse mechanism is not achieved. In addition, also the variability of load distribution has been considered, reflecting the different pallet positions assumed during the in-service life of the racks, to point out its influence on the collapse mechanism. The information carried out from the paper can be very useful for designers and manufacturers because it allows to better understand the racks behaviour in seismic load condition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.77-85
• /
• 2020

본 연구에서는 2주탑 콘크리트 사장교를 대상으로 경계조건에 따른 지진 취약도 곡선을 작성하고, 경계조건이 교량의 지진 취약도에 미치는 영향을 평가하고자 한다. 대상교량에 대한 해석모델이 Midas Civil을 사용하여 구축되었고 Fiber요소와 콘크리트, 철근의 재료모델을 적용하여 비선형 시간이력해석을 수행하였다. 주탑과 보강형 사이의 경계조건을 강결, 비구속, 포트받침, 면진받침의 총 4가지로 구분하여 각각의 경계조건에 대해 지진 취약도 곡선을 작성하였다. 주탑의 소성힌지구간과 연결부, 케이블을 취약부재로 선정하고 이 부재들에 대해 지진 취약도 곡선을 작성하였다. 분석결과 주탑의 소성힌지구간과 연결부에서는 면진받침모델이 가장 낮은 손상확률을 나타내고, 케이블의 지진 취약도는 경계조건에 의한 영향이 다른 부재에 비해 크지 않은 것을 알 수 있다.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.31-52
• /
• 2022

Investigating and evaluating the long-term creep behavior of historical buildings built on seismic zones is of great importance in terms of transferring these structures to future generations. Furthermore, assessing the earthquake behavior of historical structures such as masonry stone bridges is very important for the future and seismic safety of these structures. For this reason, in this study, earthquake analyses of a masonry stone bridge are carried out considering strong ground motions and various water levels. Tokatli masonry stone arch bridge that was built in the 10th century in Turkey-Karabük is selected for three-dimensional (3D) finite difference analyses and this bridge is modeled using FLAC3D software based on the three-dimensional finite difference method. Firstly, each stone element of the bridge is modeled separately and special stiffness parameters are defined between each stone element. Thanks to these parameters, the interaction conditions between each stone element are provided. Then, the Burger-Creep and Drucker-Prager material models are defined to arch material, rockfill material for evaluating the creep and seismic failure behaviors of the bridge. Besides, the boundaries of the 3D model of the bridge are modeled by considering the free-field and quiet boundary conditions, which were not considered in the past for the seismic behavior of masonry bridges. The bridge is analyzed for 6 different water levels and these water levels are 0 m, 30 m, 60 m, 70 m, 80 m, and 90 m, respectively. A total of 10 different seismic analyzes are performed and according to the seismic analysis results, it is concluded that historical stone bridges exhibit different seismic behaviors under different water levels. Moreover, it is openly seen that the water level is of great importance in terms of earthquake safety of historical stone bridges built in earthquake zones. For this reason, it is strongly recommended to consider the water levels while strengthening and analyzing the historical stone bridges.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.465-470
• /
• 2001

In this study, the seismic analysis of rack structure with fluid-structure interaction is performed through use of the Finite Element Method(FEM) code ANSYS. Fluid-structure interaction can specify in terms of an hydrodynamic effect which is defined as the added mass per unit length divided by the area of the cross section. Using the Floor Response Spectrum(FRS) obtained through the time-history analysis, modal analysis and seismic analysis under Operating Basis Earthquake(OBE) and Safe Shutdown Earthquake(SSE) condition is carried out. The fluid-structure interaction effects on the rack structure are investigated.