• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1103-1110
• /
• 2020

In this study, a segmented model with Upside-Down bathtub shaped failure intensity for a repairable system are proposed under the assumption that the occurrences of the failures of a repairable system follow the Non-Homogeneous Poisson Process. The proposed segmented model is the compound model of S-PLP and LIP (Segmented Power Law Process and Logistic Intensity Process), that fits the separate failure intensity functions on each segment of time interval. The maximum likelihood estimation is used for estimating the parameters of the S-PLP and LIP model. The case study of system A shows that the S-PLP and LIP model fits better than the other models when compared by AICc (Akaike Information Criterion corrected) and MSE (Mean Squared Error). And it also implies that the S-PLP and LIP model can be useful for explaining the failure intensities of similar systems.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.589-600
• /
• 2008

The purpose of the study was to segment home-shoppers by the Mixture model and to examine the characteristics of the segmented markets. Total 700 copies of questionnaires were distributed to home-shoppers more than 19 years old in Seoul and Busan and analyzed 638 copies with the Mixture model using LatentGold Program. The results of the study were as follows: In the segmented market 1, women in forties and housewives with a lowly educated person purchased for the most part from 10 A.M. to 5 P.M and the study named them as the average home shopping purchaser group. In the segmented market 2, men in twenties and students with a highly educated person often purchased with a small amount of money at 6, 7, 12 P.M and the study named them as the high-satisfaction frequent group purchasing a few goods. In the segmented market 3, professional men in forties with a highly educated person rarely purchased with a lot of amount of money from 8 P.M to 11 P.M and the study named them as low-satisfaction rare group purchasing not a few goods. Marketing strategies and discussion were suggested in detail.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.319-327
• /
• 2017

Studying the structural behavior of prestressed segmented girders is quite important due to the large use this type of solution in viaducts and bridges. Thus, this work presents a nonlinear three-dimensional structural analysis of an externally prestressed segmented concrete girder through the Finite Element Method (FEM), using a customized ANSYS platform, version 14.5. Aiming the minimization of the computational effort by using the lowest number of finite elements, a new viscoelastoplastic material model has been implemented for the structural concrete with the UPF customization tool of ANSYS, adding new subroutines, written in FORTRAN programming language, to the main program. This model takes into consideration the cracking of concrete in its formulation, being based on fib Model Code 2010, which uses Ottosen rupture surface as the rupture criterion. By implementing this new material model, it was possible to use the three-dimensional 20-node quadratic element SOLID186 to model the concrete. Upon validation of the model, an externally prestressed segmented box concrete girder that was originally lab tested by Aparicio et al. (2002) has been computationally simulated. In the discretization of the structure, in addition to element SOLID186 for the concrete, unidimensional element LINK180 has been used to model the prestressing tendons, as well as contact elements CONTA174 and TARGE170 to simulate the dry joints along the segmented girder. Stresses in the concrete and in the prestressing tendons are assessed, as well as joint openings and load versus deflection diagrams. A comparison between numerical and experimental data is also presented, showing a good agreement.

• 정보통신설비학회논문지
• /
• 제2권1호
• /
• pp.22-29
• /
• 2003

스트립라인/이중슬롯라인 변환구조에 대한 등가회로모델과 넛치 안테나를 해석하기 위한 segmented method를 제시하였다. 변환구조에 대한 등가회로 모델을 구축하기 위하여 이중슬롯라인에 대한 특성 임피던스, 분산특성과 단락 임피던스에 대한 계산을 통하며 해석적인 해로 근사화하였다. Segmented method는 이중슬롯라인 급전 넛치 안테나의 최적 설계를 구현하기 용이하게 해준다. 설계 예제로 넛치 안테나를 4차 Marchand 밸룬과 이중슬롯라인 급전 넛치 안테나로 분할하여 해석하였으며, 제안된 등가회로모델과 비교하여 타당성을 검증하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.538-548
• /
• 2018

The thermo-acoustic instability in the combustion process of a gas turbine is caused by the interaction of the heat release mechanism and the pressure perturbation. These acoustic vibrations cause fatigue failure of the combustor and decrease the combustion efficiency. This study is to develop a segmented dynamic thermo-acoustic model to understand combustion instability of gas turbine. Therefore, this study required a dynamic analysis rather than static analysis, and developed a segmented model that can analyze the performance of the system over time using the Matlab/Simulink. The developed model can confirm the thermo-acoustic combustion instability and exhaust gas concentration in the combustion chamber according to the equivalent ratio change, and confirm the thermo-acoustic combustion instability for the inlet temperature and the load changes. As a result, segmented dynamic thermo-acoustic model has been developed to analyze combustion instability under the operating condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1722-1725
• /
• 1997

This paper presents image analysis method using a Markov random field(MRF) model. Particulary, image esgmentation is to partition the given image into regions. This scheme is first segmented into regions, and the obtained domain knowledge is used to obtain the improved segmented image by a Markov random field model. The method is a maximum a posteriori(MAP) estimation with the MRF model and its associated Gibbs distribution. MAP estimation method is applied to capture the natural image by TMS320C80(MVP) and to realize the segmented image by a MRF model.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.467-475
• /
• 2023

본 논문에서는 내리기 시 파이프라인의 단면력 해석을 위한 합리적인 해석 모델을 제안했다. 본 해석 모델은 기하학적 특성과 경계조건을 고려하여 파이프라인을 분할한 후 two parameters Beam On Elastic Foundation과 Euler-Bernoulli 빔으로 모델링했다. 또한 파이프라인과 지반의 상호 작용 뿐만 아니라 파이프라인에 작용하는 축력을 했다. 기존 모델은 정형화된 하중 조건만 적용이 용이했으나 Segmented Pipeline Model로 정의된 제안 모델은 내리기 시 발생되는 대부분의 시공 조건에 대해 고려할 수 있다. 또한 가정을 최소화하고 요소를 세분화하여 모델링의 편의성과 적용성을 향상시켰다. 그럼에도 불구하고 이 모델은 FE 모델에 대비 높은 정확도를 갖고 있으므로 내리기 시 파이프라인의 안전성 평가는 물론 형상관리에도 효율적으로 활용될 수 있을 것으로 기대된다. 또한 시공 단계에서 파이프라인의 안전성을 확보함에 따라 운용 중 내구성 향상에 큰 도움이 될 것으로 판단된다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.718-725
• /
• 2017

The method of stator segmentation is generally taken to enhance the electromagnetic performance of surface-mounted permanent magnet (SPM) machine and reduce its production cost. Based on the model with single slot, the expressions of cogging torque in machine with uniform or non-uniform segmentations are deduced and the optimal combination is given. Moreover, this paper discusses a structured skewing method and put forward a novel stator structure model to reduce the cogging torque in segmented permanent magnet machine. The model can reduce the cogging torque amplitude by shifting a proper angle of slot-opening. The shifting angle formula for analysis can also be suitable for other permanent machine with segmented stator. Finally the results of finite element simulation are given to prove that the method is effective and feasible.

• Smart Structures and Systems
• /
• 제14권2호
• /
• pp.247-266
• /
• 2014

Conventional cantilevered piezoelectric energy harvesters (PEHs) are usually fabricated with continuous electrode configuration (CEC), which suffers from the electrical cancellation at higher vibration modes. Though previous research pointed out that the segmented electrode configuration (SEC) can address this issue, a comprehensive evaluation of the PEH with SEC has yet been reported. With the consideration of delivering power to a common load, the AC outputs from all segmented electrode pairs should be rectified to DC outputs separately. In such case, theoretical formulation for power estimation becomes challenging. This paper proposes a method based on equivalent circuit model (ECM) and circuit simulation to evaluate the performance of the PEH with SEC. First, the parameters of the multi-mode ECM are identified from theoretical analysis. The ECM is then established in SPICE software and validated by the theoretical model and finite element method (FEM) with resistive loads. Subsequently, the optimal performances with SEC and CEC are compared considering the practical DC interface circuit. A comprehensive evaluation of the advantageous performance with SEC is provided for the first time. The results demonstrate the feasibility of using SEC as a simple and effective means to improve the performance of a cantilevered PEH at a higher mode.

• 한국수소및신에너지학회논문집
• /
• 제21권1호
• /
• pp.1-11
• /
• 2010

Current distribution measurement technique based on a segmented bipolar plate (BP) has been widely adopted to visualize the distribution of current density in a polymer electrolyte membrane. However, a concern is raised how closely the current density of a segmented BP can approach that of a corresponding non-segmented membrane. Therefore, in this paper, the accuracy of the measurement technique is numerically evaluated by applying a three-dimensional, two-phase fuel cell model to a $100\;cm^2$ area fuel cell geometry in which segmented BPs and non-segmented membrane are combined together. The simulation results reveal that the errors between the current densities of the segmented BPs and non-segmented membrane indeed exist, predicting the maximum relative error of 33% near the U-turn regions of the flow-field. The numerical study further illustrates that the erroneous result originates from the BPs segmented non-symmetrically based on the flow channels that allows some currents bypassing flow channels to flow into its neighboring segment. Finally, this paper suggests the optimal way for bipolar plate segmentation that can minimize the deviation of current measured in a segmented BP from that of a corresponding membrane region.