• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.911-923
• /
• 1995

The zone of expansion and contraction of arm surfaces was analyzed, the correlation between arm surface changes was studied, and ergonomic sleeve designs were presented in which the consideration of body surface changes is emphasized. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are as follows : 1. As a sleeve drafting method, detailed measures should be applied on the base of the sensitivity of body surface changes. The range of arm surface changes can be divided into three zones : concentrated expansion zone, zone of little change, and contraction part. The maximum expansion zone was the upper part of elbow. 2. The correlations were higher in lengths than in circumferences. Arm lengths were mainly correlated with upper arms. The more detailed the arm surface was, the lower the correlations between surface changes were. So there was not a lot of relation between segment changes. Tendency of body surface changes depended on the anatomical structure of the upper extremity and the movements of arm muscles. 3. As an application of measures and ease, ergonomic sleeve designs weve presented in which arm surface changes were considered. Ergonomic sleeve designs are recommended for working clothes and sports wear.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.2
• /
• pp.47-58
• /
• 2002

This research suggested the mathematical model (forward kinematics method) to provide the reference points of driver space more easily and accurately in designing the package layout of vehicle interiors. For this purpose, the lengths of body segments of drivers and various joint angles occurred while were used. The length data between joints for the mathematical model were extracted from $SAFEWORK^{\circed{R}}$ as well as 95th percentile male and 5th percentile female body dimensions were utilized. In addition, the angles of body segments were applied on its diverse values within proper ranges in order to compare them each other. the mathematical model in this study was based on the concept of converting polar coordinate system to Cartesian coordinate system so that reference points of driver space were acquired in Cartesian coordinate system after using the segment lengths of drivers and the joint angles of driving postures as an input of polar coordinate system. It is expected that reference points of driver space obtained from this research are helpful to the study on package layout that is appropriate for physical characteristics of drivers.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.107-113
• /
• 2015

The goal of this paper is to investigate structural integrity factors of RMI(reflective metal insulation) to confirm the design requirements in nuclear power plant. Currently, a glass wool insulation is using now, but it will gradually be replaced with the reflective metal insulation maded by stainless steel plates. The main function of an insulation is to minimize a heat loss of vessel and pipes in RCS(reactor coolant system). It has to maintain structural a integrity in nuclear power plant life duration. In this study, the structural integrity analysis was carried out both multi-plate and outer shell plate by using a static analysis and experimental test. First, inner multi-plate has a self support structure for being air space. Because the effect of total static weight in multi-layer plate is low, a plate collapse possibility is not high. Considering optimum thin plate pressing process, it has to pre-check the basic physical properties. Second, the outer segment thickness and stiffener shape are verified by the numerical static analysis, and sample test for both type of panel and cylindrical pipe model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.444-449
• /
• 1998

A modal transducer in two-dimensional structure can be implemented by varying the distributed transducer's gain spatially. In this paper, a method based on finite element method is developed for optimizing spatial gain distribution of PVDF transducer to create the modal transducer for specific modes. Using this concept, one can design the modal transducer in two-dimensional structure having arbitrary geometry and boundary conditions. As a practical means for implementing this continuous gain distribution without repoling die PVDF film, the gain distribution is approximated by optimizing gain-weights of interface circuit. The whole spatial area of the PVDF film is divided into several electrode segments and the signals from each segment are properly weighted and summed by interface circuit. This corresponds to the approximation of a continuous function using discrete values. The electrode partition is optimized using the genetic algorithm. Gain-weights are optimized using the simplex search method. A modal sensor for first to fourth modes of aluminum plate is designed using PVDF film with gain-weighted interface circuit. Various lamination angles of PVDF film are taken into consideration to utilize the anisotropy of the PVDF film. Performance of the optimized' PVDF sensor is demonstrated by numerical simulations..

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.321-333
• /
• 2005

With the limited frequency spectrum and an increasing demand for cellular communication services, the problem of channel assignment becomes increasingly important. However, finding a conflict free channel assignment with the minimum channel span is NP hard. As demand for services has expanded in the cellular segment, sever innovations have been made in order to increase the utilization of bandwidth. The innovations are cellular concept, dynamic channel assignment and hierarchical network design. Hierarchical network design holds the public eye because of increasing demand and quality of service to mobile users. We consider the frequency assignment problem and the base station placement simultaneously. Our model takes the candidate locations emanating from this process and the cost of assigning a frequency, operating and maintaining equipment as an input. In addition, we know the avenue and demand as an assumption. We propose the network about the profit maximization. This study can apply to GSM(Global System for Mobile Communication) which has 70% portion in the world. Hierarchical network design using GA(Genetic Algorithm) is the first three-tier (Macro, Micro, Pico) model, We increase the reality through applying to EMC (Electromagnetic Compatibility Constraints). Computational experiments on 72 problem instances which have 15${\sim}$40 candidate locations demonstrate the computational viability of our procedure. The result of experiments increases the reality and covers more than 90% of the demand.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.94-102
• /
• 2003

This paper describes the development and implementation for the SYMBOLGEN(SYMBOL GENerator) software. The SYMBOL-GEN software is for improving graphic processing speed and decreasing data communication load in ASC by genera ting and downloading off-line symbol file for HUD and MFD , which are the main display equipments in military aircraft. The SYMBOL-GEN is developed on PC using C++ language and MS Visual Studio 6.0 development tool. It is also designed to be modified and extended easily by introducing object-oriented software development technique.

• Journal of Information Technology Services
• /
• v.5 no.2
• /
• pp.155-168
• /
• 2006

Software product line is a software product or a set of software system, which has common functions. We can develop a specific software product, which satisfies requirements of a particular market segment and a mission in a specific domain by reusing the core asset such as the developed software architecture through the software product line. Software development methodology based on the software product line can develop a software more easily and fast by reusing the developed software core asset. Developed countries of software technology select software product line as a core field of software production technology, and support technology development. In case of USA, CMU/SEI(Carnegie Mellon University/Software Engineering Institute) developed product-line framework 4.0 together with the industry and the Department of Defense. Europe is supporting the development of product line technology through ITEA(IT for European Advancement) program. However, industries in our country understand the necessity of software production technology based on product line concept for the purpose of increasing productivity, it is not sufficient to invest for this technology development. In this paper, we aim to construct the common architecture of software product line for production of the software product line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.282-287
• /
• 2002

This paper action tracing by techniques to do image sequence component to watch invader based on Mobile internet use. First, detect frame in animation that film fixed area, and make use of image subtraction between two frame that adjoin, segment fixed backing and target who move. Segmentalized foreground object detected and did so that can presume middle value of gouge that is abstracted to position that is specified and watch invader by analyzing action gouge. Those watch information is stored, and made Mobile client send out SMS Message about situation of watch place to server being stored to sensed serial numbers, date, Image file with recording of time.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.293-296
• /
• 2002

This paper proposes new driving methods for designing a driver independent of the current property of organic light emitting diodes (OLED) displays. The proposed methods are the Look-Up Table (LUT) and the Pulse Width Modulation (PWM). The LUT is used to handle the amount of the current for driving the OLED display panel and the PWM is applied to represent the gray scale on the OLED display panel. Segment and common drivers were implemented using delay circuits to prevent short-circuit current and a DC-DC converter was designed to supply the drivers with a power source. In particular, tile proposed methods are used for the manufacturing of 1.8" 128$\times$128 dot passive matrix OLED display panel. The designed circuit was fabricated using 0.6w, 2-poly, 3-metal, CMOS process and applied to the Personal Communication System (PCS) phone successfully.ully.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.276-281
• /
• 2008

Because the distribution systems experience frequently the fault by several causes, the identification task of fault location plays very important role in the view point of power supply reliability. The distribution systems are designed as radial structure with three-phase and single-phase branch line to supply the electric power to the widely dispersed loads, and it have a several load taps within each line segment. it makes the accurate fault distance determination difficult. Accordingly in this papers, the existing fault point determination methods are surveyed and analyzed, and then a fault distance determination method for distribution feeder is adopted which can be executed effectively in DAS center. Finally, the adopted method is verified using EMTP simulation.