• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.59-65
• /
• 2005

A phosphate recovery system from artificial wastewater was developed using a completely mixed phosphorus crystallization reactor, in which powdered converter slag was used as a seeding crystal. In preliminary test, the optimal pH range for meta-stable hydroxyapatite crystallization for high phosphorus concentration was observed to be 6.0 to 7.0, which was different from the conventionally known pH range (8.0~9.5) for effective crystallization in relatively low phosphorus concentration less than 5 mg/L. The average phosphorus removal efficiency in a lab-scaled completely mixed crystallization system for artificial wastewater with about 100 mg/L of average $PO_4-P$ concentration was shown to be 60.9% for 40 days of lapsed time. XRD analysis exhibited that crystalline of hydroxyapatite formed on the surface of seed crystal, which was also observed in SEM analysis. In EDS mapping analysis, composition mole ratio (=Ca/P) of the crystalline was found to be 1.78, indicating the crystalline on the surface of seed crystal is likely to be hydroxyapatite. Particle size distribution analysis showed that average size of seed crystal increased from $28{\mu}m$ up to $50{\mu}m$, suggesting that phosphorus recycling from wastewater with high phosphorus concentration can be successfully obtained by using the phosphorus crystallization recovery system.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.519-524
• /
• 2009

Purpose: This study was conducted to establish the most effective method of cell therapy by comparing and analyzing the level of wound healing after various cell delivery methods. Methods: Human mesenchymal stem cells were administered using 5 different methods on full thickness skin defects which were deliberately created on the back of 4 - week old mice using a 8 mm punch. Different modes of administration, cell suspension, local injection, collagen GAG matrix seeding, fibrin, and hydrogel mix methods were used. In each experiment group, $4{\times}105$ mesenchymal stem cells were administered according to 5 deferent methods, and were not for the corresponding control group. Results: The wound healing rate was fastest in the local injection group. The wound healing rate was relatively slow in the collagen matrix group, however, the number of blood vessels or VEGF increased most in this group. Conclusion: For rapid wound healing through wound contraction, it is advantageous to administer MSC by the local injection method. For the healing process of a wide area, such as a burn, the seeding of cells to collagen matrix is thought to be effective.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1181-1187
• /
• 1999

PZT(53/47) precursor 1M sols were prepared using a diol based Sol-Gel process, and thin films were deposited by spin coating onto Pt/Ti/$SiO_2$/Si substrates. With a single coating, final film thickness of aproximately 0.9${\mu}m $ was achieved from diol-based PZT sol. Since PZT crystallized in a ferroelectric perovskite phase from an intermediate nonferroelectric pyrochlore phase, the effects of the presence of perovskite PZT seeds on the phase transformation of PZT were investigated. Seeded PZT films were prepared from the seeded PZT 1M sols in which seeds with less than 0.2${\mu}m $ in size and 1wt% were dispersed in n-propanol before mixing with the PZT stock solution. The seeding effects were confirmed by the fact that the formation temperature of perovskite phase decreased by 50$^{\circ}C$ with less than 1wt% seeds.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.381-395
• /
• 1993

To investigate the procedure of natural plant succession on cutting slope in the forest roads, considered elapsed years and regional distribution, data were collected from natural and artificial treatment slope. And to elucidate the effective methods of revegetation on forest road slope, each seeding experiments carried out with 4 species(Themeda triandra, Lysimachia clethroides, Artemisia princeps and Lespedeza cyrtobotrya). The pioneer species on cutting slope in the forest road were Pinus densiflora, Lespedeza bicolor, Rhubus crataegiflora etc. in wood species, and Arundinella spp., Lysimachia barystachys, Artemisia spp. etc. in herb species. In process of year, plant coverage was increased and average of plant coverage was 30% in road slope which elapsed 5 years after construction. On short slope less than 3m, broadcast seeding method with straw mulch was more effective way than the other methods. Slope revegation work should be adapted with forest road construction work and revegetation work with native species will be effective.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.1
• /
• pp.141-154
• /
• 2012

This study was launched to verify the effective composition of plant species and its management program most suited for the dredged soiled area near Nakdong River Site 14. The improvement methods of planting base and the composition of plants such as silver grass, reed, and some colonies in aesthetic effect were studied. To search the management methods to decrease the confining pressure risen from the burried seeds which would consequently harm the previously seeded plants, experimental construction process was measured on the site. The purpose of this experiment was to figure out which part of the improvement on the plant base has the most significant effect for the revegetation of infertile, dredged soil, to verify the easily seeded, developing plants among seeded plants, and finally, to find the restoration model using plants near the dredged soil around riverside. 8 seeded plants and 23 invaded species were appeared which among the emerged plants, development of Aster yomena MAKINO, Lotus corniculatus var. japonica Regel, Trifolium repens L, and Dianthus longicalyx Miq were proved to be brought up well. Difference risen from the seed composition were not noticeable until 150day since the germination was proceeded mainly by Aster yomena MAKINO. The experimental plot with dredging sand+organic fertilizer method of construction and dredging sand+soil conditioner method showed most development while the effect of the plot with only the soil base of dredging sand stayed low. Another important method for the management of infertile, dredged soil base would be the removal of disturbing species which the experiment showed the tied relationship between the removal of disturbing species and development of seeding plants. Although this study was carried out focused on the Nakdong River Project, the study suggests the general management program that the removal of disturbing species such as Humulus japonicus Sieboid & Zucc. and Pueraria lobata (Willd.) Ohwi in times around rainy season(60days after seedling) would be effective for the easy growth of revegetation plants.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.448-454
• /
• 2001

Low field electron emission from novel carbon based cold cathodes is reported. The cathodes consisted of a layer of nanoseeded diamond and an over layer of nanocluster carbon films. The nanoseeded diamond was first coated on to thesubstrate. The nanocluster carbon films were then deposited on the nanocrystalline diamond coated substrates using the cathodic arc process at room temperature. The heterostructured microcathodes were observed to exhibit electron emission currents of 1 $\mu$A/cm$^2$ at fields as low as 1.5 to 2V/$\mu$m. The effect of the nanoseeded diamond size and concentration and the properties of different nanocluster carbon films on emission characteristics is presented.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.167-170
• /
• 1998

To apply diamond films in microelectromechanical systems(MEMS), it is necessary to develop the patterning technologies of diamond films in the micrometer scale. In this paper, three different kinds of technologies for patterning CVD diamond films carried out by us were demonstrated: selective growth by improved diamond nucleation in DC bias-enhanced microwave plasma chemical vapor deposition (MPCVD) system, selective growth of seeding using diamond-particle-mixed photoresist, and selective etching of oxygen ion beam using Al as the mask. It was show that high selectivity and precise patterns had been achieved, and all the processes were compatible with IC process.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.139-141
• /
• 2001

YBCO superconductors were prepared by top-seeded melt growth process using various numbers of seeds. The levitation forces and trapped magnetic fields of the top surfaces of the samples were measured using Nd-B-Fe permanent magnets It was found that the processing time was greatly reduced by multiple seeding, but the properties were decreased as the number of seeds was increased. The degradation of the properties is attributed to the presence of the nonsuperconducting phases at the grain boundaries as result of the entrapment of a residual melt at grain boundaries during melt processing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.146-147
• /
• 2013

The oyster shells of about 240,000 tons have been annually produced in south coast of South Korea. However, about 25% of the oyster shells (60,000tons) was recycled as oyster seeding and fertilizer due to the limited amount of consumption for such purposes. The stored amount of oyster shell in the fertilizer manufacturing company is overfilled, and thus cannot accept any more of the waste oyster shells. As a result, landfill and illegal dumping of waste oyster shells have become an increasingly serious issue since 2011. In this research, the problems generated by the oyster shells were investigated through surveying activities. One of the possible alternative solutions that can process large amount of waste economically was found to be the application of oyster shells as a construction materials.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.12
• /
• pp.1154-1160
• /
• 2005

A panoramic-PIV system has been constructed for the analysis of the airflows in a room. Smoke is used as seeding particles and are visualized by a pulsed laser (Nd-Yag, 120 mJ). Panoramic images have been obtained by an image composition process using the two images obtained by the two cameras $(1k\times1k)$ that are viewing the wide measurement areas. Velocity vector fields have been obtained by the grey-level cross-correlation PIV method. Three room models $(L{\times}W{\times}H[mm^3],\;500\times500\times250,\;350\times350\times175,\;250\times250\times125)$ have been tested. The experimental results have proven that the constructed panoramic-PIV system can be used as a useful tool for analyzing the airflow characteristics in the room models.