• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.35-40
• /
• 2022

To fabricate large grain YBCO bulk superconductors by melt process, Sm123 single crystal with a high melting point are mostly used as seeds. However, it also uses Y123 film deposited on MgO single crystal substrate. This study investigated the growth behavior of the Y123 grain during a melt process when single grain YBCO bulk was used as a seed. Single grain Y123 bulk was grown when the seed size was small. When the seed size was relatively large, multiple grains were grown but the grains were still large. Y123 seed crystal was completely decomposed during high temperature anneal at 1040℃ and new Y123 crystals were nucleated during a slow cooling stage below a peritectic temperature. Thereafter, newly formed Y123 crystals from the seed area are thought to grow into the Y1.8 powder compact. The crystallographic orientations of newly nucleated Y123 grains are independent of the crystallographic orientation of Y123 seed. It is thought that the crystallographic orientation of newly nucleated Y123 crystal can be controlled by using Y211-free Y123 single crystal as a seed of homo-seeding melt growth.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.104-108
• /
• 2004

A simple dispersion measurement technique has been demonstrated by using a self-seeding laser oscillation of a Fabry-Perot laser through a closed loop. The optical pulses of different wavelengths emitted from the Fabry-Perot laser travel down an optical fiber and the group velocity difference between the pulses due to the chromatic dispersion of the optical fiber is measured through the self-seeding laser oscillation process. The dispersion parameter of the optical fiber is calculated from the measured group velocity difference. The performance of the proposed technique has been confirmed experimentally and the accuracy of dispersion parameter measurement was comparable to that of commercial instruments with expensive equipment and components. The repeatability of the proposed method was better than 0.5%.

• Korean Journal of Weed Science
• /
• v.12 no.3
• /
• pp.200-222
• /
• 1992

The results of recent researches for improvement of seedling stand in direct seeded rice on the dry paddy in Korea were summarized as the following ; a variety to be cultivated should be chosen the characteristics of high percentage germination under low temperature, shorter period of shoot emergence, and better growth of the mesocotyl and shoots. Meanwhile, there was 40% increase in seedling stand at the treatment of removal of the seed awn under using the drill seeder. After seeding the rice seed covered with soil of 3cm depth was better seedling emergence and also there was the hightest seedling emergence at the 70% of moisture content of the soil. In addition, the application of the Release containing GA 10% enabled to increase the seedling stand and furthermore it was effective under deep seeding depth. The optimum seeding date should be seeded around May 10 when mean air temperature is above 12-13$^{\circ}C$ so that may establish more less 70% in seedling stand. Based on an appropriate seedling stand of 150/$m^2$, the optimum seeding rate was 5kg/10a. It was the best in seeding method using drill seeder and the most desirable recommended seeding method was the drill seeder in terms of seedling stand. In order to improve seedling stand water management was more effective in canal irrigation and in drainage at 6hr after irrigation following by the seeding process. On the other hand, for the increase of seedling stand under flooded condition a variety might have characters being better germination at low concentration of dissolved oxygen and vertically deeper growing of the crown root. Also, seedling stand was able to increase with the seed coating of $CaO_2$in the flooded soil. It was possible to be seeded on the early part of May being mean air temperature of avove 10$^{\circ}C$ and the optimum seeding rate was 5kg/10a. For an effective water management water would be flooded up to 3cm depth for 2-3 weeks after seeding. The rice plant grown under the direct seeded cultivation might be not so much strong in lodging resistance compared to that grown under the transplanting and moreover direct seeded rice cultivation under flooded condition would be more weak growth of the rice plant than that on dry paddy. Meanwhile, the lodging would be affected by the seeding rate, the soil depth after seeding. and seeding method even in the same variety. In particular, roots in the lodging pattern of direct seeded rice cultivation under flooded condition were largely distributed on the soil surface so that resulted easily in the lodging. In general, the lodging resistance would be greater as seeding rate and amount of N fertilizer application are lower and soil depth after seeding is higher. Among the introduction of different seeding method the high ridged drill seeding method on dry paddy soil resulted in the lowest in the lodging index and also it was lower in the drill seeding method than in the scattering seeding method under flooded condition. In case of more than 150 seedlings per $m^2$ there was a severe lodging due to high lodging index at the 3rd and 4th internodes. The effective lodging prevention was able to at the treatment of the Inabenfide at 45 days before heading and the Uniconazol at 15 days before heading which caused the shortage by 10-15cm in culm length. Also, fertilizer management using split application of nitrogen would be contributed the reduction of lodging at the rate of 20-30-20-20-10%(basal-5th leaf stage-7th leaf stage-panicle initiation stage-heading stage) on the dry paddy soil.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.1
• /
• pp.25-35
• /
• 2015

Pennisetum aloperculoides is a key revegetation species mixed with other plants species and used for revegetating cut-slopes. The purpose of this research is to identify the effects of mixed seeding of revegetation plants on cut-slope revegetation with respect to the quantity of Pennisetum aloperculoides seeds. The coverage ratio and appearance frequency of Pennisetum aloperculoides, and other revegetation species were measured to assess the cut-slope revegetation. We divided Pennisetum treatments into four groups with different Pennisetum seed quantities of $0g/m^2$, $5g/m^2$, $10g/m^2$, and $15g/m^2$. For each treatment group, we mixed identical quantities of seeds from herbaceous flowers (bird's-boot trefoil, aster, chrysanthemums, golden coreopsis and china pink), cool-season turfgrasses, and woody plants (korean lespedeza, indigo and silk tree). The increase in the quantity of the Pennisetum seeds resulted in the higher coverage ratio for Pennisetum, but in the lower coverage ratio for herbaceous flowers, cool-season turfgrasses, and woody plants. We observed a short-term succession process in which the dominant species shifted in the following order: the initial species Pennisetum, herbaceous flowers, and then lastly woody plants. In case of the appearance frequency, we also observed the higher appearance frequency for Pennisetum and the lower appearance frequency for the other plants due to the increase in the quantity of Pennisetum seeds. Pennisetum, bird's-foot trefoil and china pink showed the tendency to decrease the appearance frequency from one month after seeding while cool-season turfgrasses became extinct due to summer drought. In the woody plants, the appearance frequencies of korean lespedeza and indigo were high due to the decrease in quantity of Pennisetum seeds. The silk trees were damaged from winter frost and none emerged at all in 2013 (the following year after the seeding). Korean lespedeza and indigo appeared to have the short-term rapid dominance over other treated revegetation plants.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.5
• /
• pp.241-248
• /
• 2020

The change of the deposition behavior of diamond through a pretreatment process of the base metal prior to diamond deposition using HFCVD was investigated. To improve the specific surface area of the base material, sanding was performed using sandblasting first, and chemical etching treatment was performed to further improve the uniform specific surface area. Chemical etching was performed by immersing the base material in HCl solutions with various etching time. Thereafter, seeding was performed by immersing the sanded and etched base material in a diamond seeding solution. Diamond deposition according to all pretreatment conditions was performed under the same conditions. Methane was used as the carbon source and hydrogen was used as the reaction gas. The most optimal conditions were found by analyzing the improvement of the specific surface area and uniformity, and the optimal diamond seeding solution concentration and immersion time were also obtained for the diamond particle seeding method. As a result, the sandblasted base material was immersed in 20% HCl for 60 minutes at 100 ℃ and chemically etched, and then immersed in a diamond seeding solution of 5 g/L and seeded using ultrasonic waves for 30 minutes. It was possible to obtain optimized economical diamond film growth rates.

• Korean Journal of Weed Science
• /
• v.31 no.4
• /
• pp.394-400
• /
• 2011

Ancient mix seeding that started in China and generated in Korea is one of the methods of securing foods against natural calamities. The history of this technology was excerpted and presented from Chinese agricultural books as "Jeminyosul"(closely one upon the other 5C), "Wangjungnongseo"(from 1313) and Korean agricultural books as "Nongsajikseol"(from 1429), "Hanjeongrok"(from 1610), "Saekyeong" (from 1676), "Jeungbosanrimkyeongje"(from 1766), "Kwanongsocho"(from 1799), "Rimwonkyeongje" (from 1843). In this study, we suggested new environment-friendly agricultural technique to save labors using ancient mix seeding principle, which is seeding different varieties rice without fertilizer and agricultural pesticides. It is essential prerequisite to have the process such as injecting Azolla, no-tillage direct and broadcast seeding with multiple varieties of rice. Based on the results of previous studies, we evaluated the practical validity.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1098-1113
• /
• 2021

Maturation process of alfalfa (Medicago sativa L.) could be prevented by the reduction of lignin content in terms of conventional breeding or transgenic technology. Alfalfa could exhibit higher leaf/stem ratio, with a concern of yield loss. The objective of this study was to compare forage yield and nutritive value of low lignin alfalfa and two reference varieties subjecting to two harvest intervals and three seeding rates. The experimental design was a randomized complete block in a split-split plot arrangement with four replicates, where harvest intervals (28-day and 35-day) were assigned to whole plots, seeding rates were subplots, and varieties were sub-subplots. The weighted mean nutritive value was applied to two production years of 2016 and 2017. Hi-Gest 360 (low lignin alfalfa) provided similar yield potential and increased nutritive value compared to two reference varieties. Over a two-year production period, alfalfa harvested at every 28-day interval provided more economic returns than those at 35-day interval. For the seeding year and first production year, five cuts made by the 28-day interval produced more yield than four cuts by the 35-day interval. Due to limited rainfall in May 2017, a sharp drop of the first cutting overturned the advantage of the five-cut system. Shorter intervals between harvests generally increased crude protein (CP) concentrations. The differences of relative feed value (RFV) between two harvest intervals tended to be great during the first and second cuttings. Overall, harvest interval had a large effect on nutritive value and a more significant effect on alfalfa dry matter yield than variety selection. Seeding rate did not affect alfalfa yield and nutritive value.

• The Korean Journal of Ceramics
• /
• v.5 no.1
• /
• pp.50-54
• /
• 1999

$(Pb_xLa_{1-x}) (Zr_yTi_{1-y})O_3$ (PLZT) thin films with electrooptic effect are promising for the optical application such as display or light shutter. However, it is difficult to use inexpensive and transparent glass substrates because the conventional process for preparation of PLZT requires temperatures above $600^{\circ}C$. In order to deposit a perovskite PLZT thin films at low processing temperatures through alkoxide route, we have offered several seeding processes which reduce the activation energy for crystallization. In this study, we optimized the stacking structure of multilayered PLZT for obtaining single phase perovskite at lower temperatures. As a result, ferroelectric PLZT thin films with different compositions were successfully prepared at a temperature as low at $500^{\circ}C$.

• Journal of Agricultural Extension & Community Development
• /
• v.24 no.2
• /
• pp.99-115
• /
• 2017

The purpose of this study is to analyze potential adoption rates and reusing patterns of the new rice direct seeding technology. The model constructed and employed in this study is a system dynamics model of farmer adoption and reusing patterns for this new technology over time. The model incorporates a causal loop diagram that explains interactions among rice cultivation subsystems with feedback loops and further attempts to build a causal loop model with stock-flow diagram for computer simulation. As one example of how the model can be used to provide insight to rice farmers, simulations are run over varying levels on the cultivation process of rice. The major finding is to demonstrate the utility of system dynamics simulation methodology in aiding the rice wet direct seeding farmers' decision making.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.212-219
• /
• 1985

The field experiment was conducted to study on the growth analysis of early variety, MTC-1, and late variety, Suweon 19, in response to seeding time at Suweon. The results summarized as follows: 1. Days required for Leaf-Formation(L-phase) of MTC-1 and Suweon 19 was same but that of Node-Thickening(N-phase) was quite different, e.g. late variety has two times longer. The period of Ear-Development (E-phase) in MTC-1 was 41 days and 53 days in Suweon 19. L-and N-phase were shortened by late seeding but E-phase was not influenced by seeding time. 2. Leaf Area Index(LAI) was decreased and Leaf Area Ratio(LAR) was increased by late seeding. Days required to maximum LAR was less by late seeding. Net Assimilation Rate(NAR) of L-, N-, and E-phase was decreased but its tendency in E-phase was remarkable at late seeding. 3. Crop Growth Rate(CGR) was increased gradually in the process of plant growth and it was the highest at Husk-stage. Relative Growth Rate(RGR) was increased in L-phase and was decreased in N- and E-phase, but its tendency in N-phase was great. 4. The period required to the maximum dry matter yield was shortened by late seeding and dry matter yield was increased by early seeding.