• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.326-329
• /
• 1996

In order to synthesize Ba-ferrite fine particles by molten salt method and inhibit the abnormal grain growth of sintered specimen, KCI anti NaCl were added to basic composition to 50% by weight, and added 1 male% of $SiO_2$ to control the shape of Ba-ferrite particles. $H_{c}$ and $M_{r}$ were decreased when F $e^{3+}$ was substituted with $Co_{2+}$ and $Ti_{4+}$ from x=0 to x=1.0 in $BaFe_{12-2x}$ $Ti_{x}$ $Co_{x}$ $O_{19}$ , and 1 mole% $SiO_2$ increased the size but shortened c-axis of hexagonal ferrite. Seeds added in Ba-ferrite particle effected inhibition of abnormal grain growth during sintering.ing.g.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.8-11
• /
• 2000

The antimicrobial extracts of rheum palmatum and coptis chinensis root as well as grapefruit seed extract(GFSE) were applied to dipping treatment for keeping qualities of cucumbers, respectively, which were then packed in low density polyethylene(LDPE) films incorporated with 1 % antimicrobial extracts and stored $10^{\circ}C$. Dipping and packaging in the antimicrobial agents suppressed the growth of putrefactive microorgani는 and the decay ratio of cucumbers. In addition, the loss ratio of ascortic acid content and their weight was decreased during the sotrage of cucumbers. Consequently, the combined method of dippinf and packaging in antimicrobial agents turned out to be superior to dipping treatment or film-packaging in the view point of decay ratio and the keeping qualities of cucumbers.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.39-43
• /
• 2012

This paper presents a study on the design of a pulling module for silicon ingot and an apparatus of manufacturing silicon single crystal ingot using the same method. The pulling module is conceptually designed by using TRIZ. Czochralski method(CZ) is representative way to manufacture single crystal ingot for wafers. The seed can be broken by high tension which is caused by large weight of a silicon ingot. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The pulling module is actuated by DC motor and rollers. High tension in the seed is removed by the rotate-elevate motion of rollers in the pulling module. A rubber belt is included in the rotate-elevate mechanism for increasing friction between rollers and silicon ingot.

• Plant Resources
• /
• v.8 no.2
• /
• pp.91-95
• /
• 2005

In spring, to determine the optimal planting date and plant density of rapeseed in southern areas of Korea. $Taiwan^{\#1}$ variety for spring sowing, the highest yielding variety was grown under five different planting date and plant density. Yield components such as plant height, ear length, number of seedling stand per $m^2$, number of per ear and seed set percentage were highest at the plots with Mar. 5 of planting date and 50/20cm drilling of plant density. Yield of seed, oil, gas and 1,000 grains weight and erucic acid content were highest at the Mar. 5 of planting date and 50/20cm drilling of plant density. Judging from the results reported above, at optimum planting date and plant density of rapeseed seemed too be Mar. 5 of planting date and 50/20cm plant density in spring sowing.

• Korean Journal of Plant Resources
• /
• v.5 no.2
• /
• pp.129-137
• /
• 1992

In order to investigate the Possibility of utilizing corm as a seed corm In taro, the corm classified by the weight was planted on April 20, 1984. The effect of weight of corm (30, 50, 70, 90, 110, 130150r and 170g) on the growth, yield, and quality of taro was compared to those raised from cornel.The corm showed a better emergence rate than cermets regardless of its size. The larger the size ofcorm wasi the more the number of leaves developed, and the fisher the yield was. It was consideredthat the higher yield and better quality of taro was obtained by using larger corm as a mother corm( in the following year) due to the increase in the production of large taros.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.384-389
• /
• 2009

Germination characteristics of Chinese milk vetch(CMV) seeds produced from Hanam Province, China and Milyang, Korea were investigated to give basic information on the stability of seedling establishment in the CMV cultivation. The germination percentage of the imported CMV seed from China varied according to importation year and seed collection site ranging from 79~95%. The germination of black colored seed coat was lower than the light green colored ones and germination by seed weight was not significantly different. Although the seed germination was lower under dark than in the presence of light, it was not significantly different. The germination of the imported CMV seed slightly declined to only less than 6% after one-year of storage under natural environment conditions but it significantly decreased after two years. However, when the seed was stored at the $5^{\circ}C$, the seed germination was the same as after two years of storage. On the other hand, fresh CMV seed produced in Milyang, Korea had only 8% germination due to seed coat dormancy but the germination increased to 73~85% after breaking seed dormancy after a year of storage. The high germination percentage of 72~82% was still maintained even after 27 months of seed storage unlike the CMV seed produced from China. These results indicate that CMV seeds do not require light for germination and the seed from China should be used within one-year after importation while the seeds produced from Korea can be used even after two years from harvest for stable CMV seedling establishment in the CMV-rice cropping system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.4
• /
• pp.308-314
• /
• 2011

Seed germination and dormancy of three green manure seeds such as hairy vetch, crimson clover and narrow-leaved vetch (Vicia angustifolia L.) produced in Milyang, southern part of Korea were investigated to provide a basic information on the stability of seedling establishment in green manure seeds. In addition, the effect of seed storage duration on the germinability of imported hairy vetch and crimson seeds was also investigated. To determine the seed maturity time of three green manure seeds, the seeds were harvested manually at May 25, May 30, and June 4, and the 100-seed weight, germinability and percentage of hard seed were evaluated. Freshly harvested seeds of three green manure crops were strongly dormant because of hard seed coat. Germination percentage of the three green manure crops varied depending on the seed harvest time ranging from 30 - 52% in hairy vetch, 16 - 35% in crimson clover and 2 - 61% in V. angustifolia, respectively. Of the three crops, crimson clover and V. angustifolia matured early on May 30 to June 4 (around 35 to 40 days after flower) but hairy vetch seed did not mature until June 4 based on the seed germinability. The matured seed of crimson clover and V. angustifolia germinated less than 20% while scarification on seed coat significantly overcome the innate dormancy. On the other hand, the seed germination of hairy vetch and crimson clover was lower under dark than in the presence of light. The germination percentage of the imported hairy vetch and crimson clover seeds showed high with 77 - 79%, 94 - 95%, respectively, but the seed germination significantly declined by 21 - 32%, 30 - 40% after one-year of storage under natural conditions. The seeds germinated only 8 - 13% for hairy vetch but crimson clover did not germinate at all after two years storage. These results indicate V. angustifolia and crimson clover mature at May 30 to June 4 but hairy vetch did not. The imported hairy vetch and crimson clover seeds should be used within one-year after import for stable seedling establishment in green manure-rice cultivation cropping system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.89-94
• /
• 1997

The present study was conducted to know the growth and yield of in response to the drought stress at the different soybean growth stage. Drought stress was given to the soybean plants on early vegetative growth at fourth-node stage(FNS), mid-growth at beginning pod stage(BPS) and late growth at beginning seed stage(BSS) for 30 days, which are high availability in soil water stress on climate condition of Korea. Dry weight was decreased severely by water stress at FNS, and BPS and BSS has no difference compared to control. Chlorophyll content of leaf severely decreased at the end of water stress of FNS and BPS, but was recovered at the harvest stage. Drought-stressed root distributed mainly near the soil surface and number and dry weight of root nodule were decreased severely by drought stress at BPS. Number of pod, seed weight and yield were decreased by drought stress and showed the highest yield loss at BPS.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.2
• /
• pp.220-228
• /
• 2004

Dynamic headspace purge conditions were investigated to obtain minimum loss of high volatile compounds by breakthrough and maximum recovery of low volatile components of roasted perilla seed oil (RPSO). A response surface methodology was applied to evaluate the effect of purge temperature, purge time, and sample weight on $\ell$ n (total peak area), breakthrough ratio, and peak area of perilla ketone the least volatile component of RPSO. Sample weight was the most important factor on the $\ell$ n (total peak area) but it did not affect peak area of perilla ketone. All process variables significantly influenced breakthrough ratio. The optimum condition was determined by superimposing contour plots at purge temperature of 48$^{\circ}C$ for 12 min purge time at sample weight of 0.60 g. 2-Propanone, 2-butanone, acetic acid, 2-methyl propanal were main breakthrough compounds in RPSO flavor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.2
• /
• pp.105-118
• /
• 2015

This study was conducted to obtain proper amount of solid swine manure and poultry manure in the beginning phase of Cornus kousa growth by investigating the initial germination, seedling growth increment, dry weight, chlorophyll content change, body nutrient uptake and chemical changes of soil according to the concentration of solid swine manure and poultry manure fertilization. When treated with solid swine manure and poultry manure, seed germination rate was the highest in the control. However germination rate showed a tendency to decrease when treated with high concentration of swine manure and poultry manure. The survey results of the growth increment were all higher than that of the control. At the 1.0% treatment of both swine and poultry manure, the seedling height growth was highest. Poultry manure treatment made higher result than swine manure treatment at each treatment. Dry weight was the highest at the 1.0% treatment by both swine and poultry manure. Dry amount declined sharply at the 2.0% treatment. Poultry manure was higher in weight than swine manure at every treatment. Chlorophyll content was the highest at the 1.0% treatment by both swine and poultry manure, but declined sharply at the 2.0% treatment. The survey content was higer than that of the control. The amount of nutrients absorbed in the seedling body was generally high at the 1.0% treatment of swine manure and poultry manure. For the planting soil of Cornus kousa the higher concentration of swine manure and poultry manure was, the lower pH became. However, nitrogen, got higher. available phosphoric acid, exchangeable K, Na, and Mg got higher.