• Journal of Ginseng Research
• /
• v.18 no.2
• /
• pp.134-136
• /
• 1994

The effects of soil phosphorus level on seed emergence, seedling mortality, plant and root development of American ginseng (Panax quinquefolium L.) were evaluated in a newly planted commercial ginseng garden. Phosphorus levels were increased from 58 ppm to 100, 150 and 200 ppm with triplephosphate (0-45-0). Higher phosphate levels increased, seed emergence and reduced seedling mortality. Root length, diameter, fresh root weight and total leaflet length were not affected by phosphate levels.

• Korean journal of applied entomology
• /
• v.44 no.4 s.141
• /
• pp.299-306
• /
• 2005

Soybean seed injury was analyzed in the experiments that soybean pods were allowed to be sucked by adults of the bean bug, R. clavatus, and were picked with a specimen pin. While attack by the bean bug at podding stage of soybean caused the increase of empty pods and completely-undeveloped seeds, attack at full seed stage caused the increase of seeds wi distinct injury mark on seed-coat. The ratio of deformed seed was lower than those of injury-marked seed and undeveloped seed when attacked during all stages. In at full bloom stage hardly produced injury-marked seeds and deformed seeds. When the injured seeds were dyed with acid-fuchsine solution, stylet sheaths of R. clavatus formed on seed-coat were observed in 83% of undeveloped seeds formed under attack during podding stage and in 91% of injury-marked seeds formed during full seed stage. In pods injured with a specimen pin at full seed and full maturity stages, no healthy seeds could be obtained from the pods. And the more picked at full seed stage, the more deformed seeds were produced and the higher weight reduction of injury-marked seed occurred. However, pin-injury at full maturity stage didn't give rise to weight reduction of seeds.

• Journal of Biosystems Engineering
• /
• v.25 no.6
• /
• pp.463-470
• /
• 2000

For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

• The Plant Pathology Journal
• /
• v.18 no.2
• /
• pp.68-73
• /
• 2002

The influence of fungicidal spray was assessed on powdery mildew epidemics caused by Erysiphe polygoni D.C. and on yield-attributing characters of mungbean [Vigna radiata (L.) Wilczek]. Mildew attack adversely affected the yield-attributing characters of mungbean and exhibited negative significant correlation with pod length (-0.57), pods/plant (-0.74), pod weight (-0.68), 100 seeds weight (-0.69), 100 seeds swell weight (-0.59), and seed germination (-0.71). These characters had direct or indirect effects on grain yield, which was also adversely affected due to mildew attack (-0.89). Powdery mildew was significantly retarded due to the single spray of carbendazim (0.05%) at 30-day-old crop, where the apparent rate of infection (r) was minimum at 0.0095/ unit/day and with low (11.44%) powdery mildew intensity. Other fungicides like tridemorph (0.075%) and penconazole (0.05%) were equally effective against the mildew disease where the disease intensity was less than 20% and the values of r were 0.0134 and 0.039/unit/day respectively, as compared with the control at 0.267/unit/day. Fungicide spray influenced the yield-attributing characters besides controlling the disease. Such effects were more pronounced in carbendazim (0.05%)-treated plots due to its phytotonic nature where pod length (7.59cm), pods/plant (29.75), pod weight (8.16 g), 100 grain weight (3.94 g), and swell weight of 100 seed (9.49 g) were maximum resulting to the highest yield (480 kg/ha) as compared with that of control (224 kg/ha). Spray of carbendazim also improved seed germination (74.5%). Spray of other fungicides like carbendazim with copper oxychloride in 1:1 ratio, tridemorph (0.075%), and penconazole (0.05%) was equally effective against powdery mildew of mungbean. These fungicides also exhibited positive effects on yield-attributing characters of the crop and finally increased yield. These systemic fungicides were more effective in controlling powdery mildew disease of V. radiata in the rainy season compared with wettable sulphur.

• Journal of Plant Biotechnology
• /
• v.43 no.3
• /
• pp.332-340
• /
• 2016

Seed size traits are controlled by multiple genes in crops and determine grain yield, quality and appearance. However, the molecular mechanisms controlling the size of plant seeds remain unclear. We performed functional analysis of BrPATL4 encoding Sec14-like protein to determine the genetic architecture of seed size, shape and their association analyses. We used 60 $T_3$ transgenic rice lines to evaluate seed length, seed width and seed height as seed size traits, and the ratios of these values as seed shape traits. Pleiotropic effects on general architecture included small seed size, erect panicles, decreased grain weight, reduced plant height and increased sterility, which are common to other mutants deficient in gibberellic acid (GA) biosynthesis. To test whether BrPATL4 overexpression is deleterious for GA signal transduction, we compared the relative expression of GA related gene and the growth rate of second leaf sheath supplied with exogenous $GA_3$. Overexpression of BrPATL4 did not affect GA biosynthesis or signaling pathway, with the same response shown under GA treatment compared to the wild type. However, the causal genes for the small seed phenotype (D1, SRS1, and SRS5) and the erection of panicles showed significantly decreased levels in mRNA accumulation compared to the wild type. These results suggest that the overexpression of BrPATL4 can control seed size through the suppression of those genes related to seed size regulation. Although the molecular function of BrPATL4 is not clear for small seed and erect panicles of BrPALT4 overexpression line, this study provides some clues about the genetic engineering of rice seed architecture.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.50-55
• /
• 2006

When the monodisperse polystyrene(PS)/HDDA polymer particles were synthesized via one-step polymerization using polystyrene seed particles by dispersion polymerization, the effects of 1) the molecular weight of seed polymer particles, 2) the ratio of the absorbed HDDA to the seed polymer particles (swelling ratio) and 3) seeded polymerization rate on the surface morphology of PS/HDDA polymer particles were investigated. It was observed that the creation of the crater shaped defect on the surface of PS/HDDA polymer particles was irrespective of the molecular weight of seed polymer ant swelling ratio. But its surface morphology could be controlled by the change of the seeded polymerization rate.

• Plant Resources
• /
• v.6 no.3
• /
• pp.178-182
• /
• 2003

This study was conducted to investigate the relationship between yearly variations of climatic elements and yearly variations of productivity in perilla. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1991 to 2000. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly variation of the amount of precipitation in September was large with coefficients of variation(c. v.) of 11.1%, but the coefficient of variance(c. v.) in July and August were relative small with 1.8, 2.1%, respectively. Number of cluster per hill and weight of 1,000 grains were greatly with c. v. of 76.1, 79.3%, respectively, but the coefficients of variance(c. v.) of plant height and seed yield were more less with 9.58, 10.60%, respectively. Correlation coefficients between precipitation of September and seed yield were positively significant correlation at the level of 5.1%, respectively, but the duration of sunshine in September and seed yield were negatively significant at the level of 5.1%, respectively. Correlation coefficients of these, the plant height, number of branches per plant, cluster length, number of cluster per hill, weight of 1,000 grains and seed yield were positively significant at the level of 5.1% respectively.

• Korean Journal of Plant Resources
• /
• v.20 no.6
• /
• pp.504-510
• /
• 2007

GE interaction is the expression of differential genotypic adaptation across environments. GE interactions through different stability parameters and performance of the traits of genotypes were studied. The traits were days to maturity, pod length, number of pods/ plant, 100-seed weight and seed yield/plant in ten soybean genotypes across five environments. Significant differences were observed for genotypes, environments and GE interactions. Stability analysis after Eberhart and Russell's model suggested that the genotypes used in this study were all more or less responsive to environmental changes. Most of the genotypes perform better in Env.3. Based on phenotypic indices(Pi), regression ($S^2di$) genotype Garurab was found fairly stable for days to maturity. BS-23 and G-2120 may be considered as stable genotype for pod length. All the genotypes except G-2120 showed that the genotypes were relatively unstable under environmental fluctuation for the number of pod/plant. Genotype BS-23 was found most stable among all the genotypes for 100-seed weight. BS-3 and Gaurab was the most stable and desirable genotypes for seed yield in soybean.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.5
• /
• pp.11-25
• /
• 2019

Extraction of oil from Moringa oleifera seed using Response Surface Methodology (RSM) was investigated. Effects of three factors namely: sample mass, particle size and extraction time on the response, Moringa oleifera a volume extracted, were determined. The Box-Behnken design of RSM was employed which resulted in 15 experimental runs. Extraction was carried out in a 250 ml Soxhlet extractor with Hexane and Ethanol as solvent. The Moringa oleifera seed powder was packed inside a muslin cloth placed in a thimble of the Soxhlet extractor. The extraction was carried out at 60℃ using thermostatic heating mantle. The solvent in the extracted oil was evaporated and the resulting oil further dried to constant weight in the oven. This study demonstrates that Moringa oleifera oil can be extracted from its seed using ethanol and acetone as extraction solvent. The optimum process variables for both solvent (ethanol and acetone) was determined at sample weight of 40 g, particle size of 325 ㎛ and extraction time of 8 hours. It can be deduced that using acetone as solvent produces a higher yield of oil at the same optimum variable conditions compared to when ethanol was used.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.3
• /
• pp.171-176
• /
• 2008

The agronomic traits, such as days to flowering and maturity, plant height, 100-seed weight and seed filling period, are quantitatively inherited and important characters in soybean(Glycine max L. Merr.). A total of 126 $F_5$ recombinant inbred lines(RILs) developed from the cross of PI 171451$\times$Hwaeomputkong were used to identify quantitative trait loci(QTLs) for days to flowering(FD), days to maturity(MD), plant height(PH), 100-seed weight(SW), number of branches(NB) and seed filling period(FP). A total of 136 simple sequence repeat(SSR) markers segregated in a RIL population were distributed over 20 linkage groups(LGs), covering 1073.9 cM of the soybean genome with the average distance between adjacent markers of 7.9 cM. Five independent QTLs were identified for FD, three for MD, two for PH, three for SW, one for NB and one for FP. Of these, three QTLs were related to more than two traits of FD, MD, PH, NB and FP and mapped near the same positions on LGs H and O. Thus, these traits could be correlated with biologically controlled major QTLs in this soybean RIL population.