• 한국진공학회지
• /
• 제16권3호
• /
• pp.215-220
• /
• 2007

[ $Pt/SBT/Seed/Pt/Ti/SiO_2/Si$ ]의 구조로 $SBT(SrBi_2Ta_2O_9)$ 박막을 Self-seed layer를 사용하여 R.F. Magnetron sputter를 이용하여 증착을 하였다. Self-seed layer는 기판온도 RT(room temperature)와 $600^{\circ}C$에서 두께 30 nm으로 증착하였다. Self-seed layer의 결정화 온도를 알아보기 위해 열처리온도를 변화시켰고 이를 XRD를 통하여 결정화 유무를 확인하였다. Self-seed layer 위에 증착한 SBT를 XRD와 전기적 측정을 통해 특성을 관찰하였다.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.401-406
• /
• 2018

We investigated the effect of ZnO seed layer thickness on the density of ZnO nanorod arrays. ZnO has been deposited using two distinct processes consisting of the seed layer deposition using ALD and subsequent hydrothermal ZnO growth. Due to the coexistence of the growth and dissociation during ZnO hydrothermal growth process on the seed layer, the thickness of seed layer plays a critical role in determining the nanorod growth and morphology. The optimized thickness resulted in the regular ZnO nanorod growth. Moreover, the introduction of ALD to form the seed layer facilitates the growth of the nanorods on ultrathin seed layer and enables the densification of nanorods with a narrow change in the seed layer thickness. This study demonstrates that ALD technique can produce densely packed, virtually defect-free, and highly uniform seed layers and two distinctive processes may form ZnO as the final product via the initial nucleation step consisting of the reaction between $Zn^{2+}$ ions from respective zinc precursors and $OH^-$ ions from $H_2O$.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.198-205
• /
• 2003

R.F. Magnetron Sputtering법을 이용하여 Pt/Ti/ $SiO_2$/Si기판 위에 seed-layers와 $Ba_{0.66}$S $r_{0.34}$Ti $O_3$박막을 제조하였다. 다양한 기판온도에 따른 BST 박막의 전기적인 특성(정전용량과 누설전류)과 seed-layer층이 BST 박막에 미치는 영향을 조사하였다. BST 박막은 seed-layer층을 삽입함으로써 박막의 결정성이 향상되었고, 박막의 기판온도(결정화온도)도 상당히 낮출 수 있었다. 순수한 BST에 비하여 seed-layer를 삽입한 BST는 높은 유전상수와 낮은 유전손실 및 낮은 누설전류를 가지는 우수한 전기적 특성을 나타내었다. BST 박막의 전기적 특성은 기판온도에 따라 영향을 받고, seed-layer에 의해 향상됨을 알 수 있었다.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.186-193
• /
• 2014

A thin Cu seed layer for electroplating has been employed for decades in the miniaturization and integration of printed circuit board (PCB), however many problems are still caused by the thin Cu seed layer, e.g., open circuit faults in PCB, dimple defects, low conductivity, and etc. Here, we studied the effect of heat treatment of the thin Cu seed layer on the deposition rate of electroplated Cu. We investigated the heat-treatment effect on the crystallite size, morphology, electrical properties, and electrodeposition thickness by X-ray diffraction (XRD), atomic force microscope (AFM), four point probe (FPP), and scanning electron microscope (SEM) measurements, respectively. The results showed that post heat treatment of the thin Cu seed layer could improve surface roughness as well as electrical conductivity. Moreover, the deposition rate of electroplated Cu was improved about 148% by heat treatment of the Cu seed layer, indicating that the enhanced electrical conductivity and surface roughness accelerated the formation of Cu nuclei during electroplating. We also confirmed that the electrodeposition rate in the via filling process was also accelerated by heat-treating the Cu seed layer.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.802-809
• /
• 2001

Electroplating is an attractive alternative deposition method for copper with the need for a conformal and conductive seed layer In addition, the Cu seed layer should be highly pure so as not to compromise the effective resistivity of the filled copper interconnect structure. This seed layer requires low electrical resistivity, low levels of impurities, smooth interface, good adhesion to the barrier metal and low thickness concurrent with coherence for ensuring void-free fill. The electrical conductivity of the surface plays an important role in formation of initial Cu nuclei, Cu nucleation is much easier on the substrate with higher electrical conductivities. It is also known that the nucleation processes of Cu are very sensitive to surface condition. In this study, copper seed layers deposited by magnetron sputtering onto a tantalum nitride barrier layer were used for electroplating copper in the forward pulsed mode. Prior to electroplating a copper film, the Cu seed layer was cleaned by plasma H$_2$ and $N_2$. In the plasma treatment exposure tome was varied from 1 to 20 min and plasma power from 20 to 140W. Effects of plasma pretreatment to Cu seed/Tantalum nitride (TaN)/borophosphosilicate glass (BPSG) samples on electroplating of copper (Cu) films were investigated.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.125-126
• /
• 2007

Polycrystalline silicon thin-film-transistors (Poly-Si TFT's) with a amorphous-$Si_xGe_y$ seed layer have been fabricated to improve the performance of TFT. The dependence of crystal structure and electrical characteristics on the the Ge fractions in $Si_xGe_y$ seed layer were investigated. As a result, the increase of grain size and enhancement of electrical characteristics were obtained from the poly-Si TFT's with amorphous-SixGey seed layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.204-205
• /
• 2007

Self-seed 층을 이용한 PLZT(9/65/35), 강유전체 박막을 Sol-Gel 법을 이용해 Pt/Ti/$SiO_2$/Si 기판 위에 증착한 후, Self-seed 층에 의한 PLZT(9/65/35) 박막의 구조적, 전기적 특성을 고찰하였다. Seed 층을 도입하지 않은 PLZT 박막의 경우 다결정 상으로 형성되는 것을 알 수 있었으며, seed 층을 도입한 PLZT 박막은 (110) 방향으로 우선 배향됨을 알 수 있었다. 증착된 PLZT(9/65/35) 박막의 유전율 및 유전손살은 10kHz에서 유전율 205, 유전손살 0.029 이었으며, Self-seed layer를 도입한 PLZT 박막의 경우 seed layer를 도입하지 않은 PLZT 박막보다 낮은 온도에서 결정화 되는 것을 관찰 할 수 있었다. Self-seed layer가 도입된 PLZT(9/65/35) 박막의 경우 잔류분극 ($P_r$) 값은 $9.1{\mu}C/cm^2$, 항전계($E_c$)는 47 kV/cm을 나타내었다.

• Journal of Plant Biology
• /
• 제29권4호
• /
• pp.295-315
• /
• 1986

Structure and differentiation mechanism of the seed coat of Panax ginseng are studied with light and electron microscopes to clarify the developmental processes of seed coat and the structural changes during the differentiation of the seed. The seed coat of ginseng is differentiated from the inner cell layers of ovary wall, which can be compared with the seed coat differentiated from integument(s) in other plants. The single integument is differentiated into endothelium, which is degenerated to one layer of 4${\mu}{\textrm}{m}$ in thickness, composed of remants of cell wall components in fully ripened seed. The ripened seed coat is composed of three layers; fringe layer, inner layer and palisade layer, and all of the them are crossed at right angles with one another. This may be the cause of protection of the kernel from other mechanical injuries. The thickness of fully ripened seed coat is about 300~600 ${\mu}{\textrm}{m}$, and arrangements of sclereids are irregular. However, the raphe region of seed coat is thin about 200 ${\mu}{\textrm}{m}$ in thickness and sclereids in that region are arranged regularly. This is the important cause for the cleavage of the seed coat during post-maturation process. The vascular bundles on the raphe are still remaining after sarcocarps are removed, and one of the branches of vascular bundles entered into the seed coat through the hilum and extended to chalazal region. During post-maturation process, the supply of water being necessary for growth of embryo may be accompolished by the vascular bundles entered into the seed coat through the opened hilum.

• 한국환경과학회지
• /
• 제20권1호
• /
• pp.127-135
• /
• 2011

This study was carried out in each three study areas of Pinus densiflora community and Quercus mongolica community from March 5th, 2008 to October 15th, 2010 to analyze the relationship between seed bank and the actual vegetation of the lower layer. Based on the relationship between the lower layer of actual vegetation and the germination of seed bank, all of three study areas, the similarity of the actual vegetation of the lower layer and seed bank were high in Plot 1 (84.62%) and Plot 3 (89.91%). As for Quercus mongolica community, the similarity was high between the actual vegetation of the lower layer and seed bank in Plot 4 (82.24%) and Plot 6 (89.47%). Especially, the germination of the pine seed banks in the Pinus densiflora community compared to other tree species appeared in all. In Quercus mongolica community, Quercus mongolica did not appear among the seeds germinated in the seek bank, but the other tree species constituting the under layer of the community. In case of the restoration based on the actual vegetation, it is desirable to sue the lower layer of vegetation as the model for the making of its alternatives for restoration works of the species.