• Title/Summary/Keyword: Seed 주입량

Search Result 9, Processing Time 0.021 seconds

Fluoride Removal Using Ready-Mixed Concrete Sludge (레미콘 슬러지를 이용한 불소제거)

  • Kang, Min-Koo;Shin, Gwan-Woo;Lee, Sang-Ill
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.11
    • /
    • pp.803-808
    • /
    • 2013
  • The purpose of this study was performed to investigate the optimum conditions of pH, concrete sludge, seed dosage, mixing intensity, operation time in treating fluoride-containing wastewater as $CaF_2$ using the ready-mixed concrete sludge. Considering fluoride removal, water content, that pH 6, concrete sludge dosage of 10 g/L, Seed dosage ($CaF_2$) of 2 g/L, mixing intensity of 100 rpm and operation time of 60 min were found to be optimum. Correspondingly, removal of fluoride and water content was about 85% and 64%, respectively. Increase in amount of seed dosage did not affect fluoride removal efficiency. but the result that the water content is decreased was shown up in occuring the solid-liquid separation well.

Effects of $CaF_2$ dosage, pH and Treated Water Recirculation on Fluoride Removal in Treating Semiconductor Wastewater with Fluidized bed Reactor (FBR) (유동상 반응기를 이용한 반도체 폐수 내 불소 처리 시 $CaF_2$ 주입량, pH 및 처리수 재순환의 영향)

  • An, Myeong-Ki;Kim, Jin-Sik;Kim, Keum-Yong;Ryu, Hong-Duck;Lee, Sang-Ill
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.32 no.6
    • /
    • pp.593-598
    • /
    • 2010
  • The optimum condition for fluoride removal, water content reduction, and $CaF_2$ purity was determined in treating semiconductor waste water in which ammonia nitrogen, phosphorus, and fluoride are existed simultaneously using a fluidized bed reactor. Effects of pH, seed dosage, and recirculation of treated water were investigated through lab-scale experiments. Considering fluoride removal, sludge purity, and water content, that pH 5 and seed dose of 150 g were found to be optimum. Correspondingly, removal of fluoride and phosphate (${PO_4}^{3-}$-P) was 94.24% and 8.97%, respectively, with water content ratio of 12.94%. Increase in an amount of seed dosage not only enhance fluoride removal efficiency, but also buffer fluoride removal-reducing effect due to the variation of recirculation ratio of treated water and pH.

Treatment of N, P of Auto-Thermal Thermophilic Aerobic Digestion Filtrate with Struvite Crystallization (Struvite 결정화 반응을 이용한 고온 소화 여과액의 N, P 처리 특성)

  • Choo, Yeon-Duk;Kim, Keum-Yong;Ryu, Hong-Duck;Lee, Sang-Ill
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.11
    • /
    • pp.783-789
    • /
    • 2011
  • Recently, auto-thermal thermophilic aerobic digestion (ATAD) has a great attention for destruction of wasted sludge biomass in wastewater treatment plant. Reduction of sludge concentration has been successfully achieved with pilot scale ATAD and ceramic filtration process in field condition. However, high concentration of COD, total nitrogen (TN) and total phosphorus (TP) was observed in filtrate, which should be treated before recirculation of filtrate to biological wastewater treatment plant. This study was focused on removal of nitrogen and phosphorus contained in the filtrate of ATAD, using struvite crystallization method. The effect of operational and environmental parameters (such as, N, P and Mg ion concentration and molar ratio, pH, reaction time, agitation strength, seed dosage, and reaction temperature) on the treatment of TN and TP with struvite crystallization were evaluated. Magnesium (as $MgCl_26H_2O$) and phosphorus (as $K_2HPO_4$) ions were, if necessary, added to increase nitrogen removal efficiency by the crystal formation. Average concentration of $NH_4^+-N$ and $PO_4^{3-}-P$ of the filtrate were 1716.5 mg/L and 325.5 mg/L, respectively. Relationship between removal efficiencies of nitrogen and phosphorus and molar ratios of $Mg^{2+}$ and $PO_4^{3-}-P$ to $NH_4^+-N$ was examined. Crystal formation and nitrogen removal efficiencies were significantly increased as increasing molar ratios of magnesium and phosphorus to nitrogen. As molar ratio of $Mg^{2+}:PO_4^{3-}-P:NH_4^+-N$ were maintained to 2 : 1 : 1 and 2 : 2 : 1, removal efficiencies of nitrogen and phosphorus were 71.6% and 99.9%, and 93.8% and 98.6%, respectively. However, the effect of reaction time, mixing intensity, seed dose and temperature on the struvite crystallization reaction was not significant, comparing to those of molar ratios. Settled sludge volume after struvite crystallization was observed to be reduced with increase of seed dose and to be increased at high temperature.

Studies on the soybean varieties in Korea. -IV relationships between the seed yields and some characteristics on the several sowing dates- (대두의 품종에 관한 연구 -제4보 파종기별 수량과 제특성과의 관계-)

  • Kwon-Yawl Chang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.2
    • /
    • pp.30-37
    • /
    • 1964
  • Experiments were carried out to clarify the relationships between seed yields and some ecological characteristics, seed yields and some morphological characteristics, and the relationships among the varietal yields on the several sowing plots when grown under different climatic conditions. Twenty-four soybean varieties were used as the material, selected at random from 138 varieties which were cultivated the year before. These varieties were grown in the Experimental Farm, Chinju Agricultural College, Kyung Sang Namdo, Korea, and seed sowing was conducted at 5 times, from April to July, in 1962 and 1963. The results obtained are summarized as follows: 1. Correlations between seed yields and some ecological characteristics on the sowing date bases are shown in Table 1. Among some ecological characteristics, it was observed that there wert close relationships between seed yields and days to flowering, and between seed yields and the total growing length, except on the late sowing, i.e. July sowing plots, However, there was no clear correlation between seed yields and durations of flowering, and between seed yields and days from flowering to maturity. 2. Correlations between seed yields and some morphological characteristics on the sowing date bases are shown in Table 2. From this table, it was also observed that there were some close relationships between seed yields and branch number for plant, stem diameter, plant weight, pod number per plant, and grain number per plant, but there was no clear relationship between seed yields and stem length, and between seed yields and 100 grain weight, on every sowing plot. 3. Relations between varietal yields and the sowing dates are shown in Table 3. Our leading varieties such as Ulsan, Sangdoo, Changdan Backmok, Iksan, Haman, Barchongdeo, and Anion Daerip, which belong to the maturity groups of IV, V, and VI, have been significantly high in yield at each sowing date plot, but the extreme early varieties, that frequently are damaged by insects, moisture and diseases, and the extreme late varieties, that frequently are caught by frost suffering reduced yield, are showed a lower yield than the others. However, extreme early varieties, for instance, Black Hawk, an American variety, and Chung Buk Baek, a Korean early variety, showed high productivity on the late sowing, June and July sowing plots, and Do san No. 6, which is late Japanese variety, showed a high yield on the extreme early sowing, i.e. April sowing plots. 4. Relations between seed yields and the sowing dates on the varietal bases are shown in Table 4. It was observed that, the early varieties did not differ much in yields at the various sowing dates while the yields of late varieties decreased progressively with subsequent dates. However, the extreme late varieties, such as Tamanishiki, that frequently are caught by frost suffering reduced yield, may be difficult to harvest at this location. The results in these experiments showed that in most cases maximum yields were obtained when leading varieties, which are medium or late varieties, were shown in Mid-May, and progressively lower yields were produced from June and July sowings. On the other hand, the late sowings of the early varieties, such as Black Hawk and Chung Buk Baek, in these experiments showed favorable yields compared with the others. From these results, we can predict that our local medium or late varieties produce higher yields at this location than was produced by early varieties in most of the sowing dates, especially the May sowing, and early varieties such as Black Hawk and Chung Buk Baek should be used in the late sowing, June sowing time.

  • PDF

Template-free Hydrothermal Synthesis of High Phase Purity Mordenite Zeolite Particles Using Natural Zeolite Seed for Zeolite Membrane Preparation (제올라이트 분리막 제조를 위한 유기주형 없는 고순도 모데나이트 제올라이트 입자 수열합성에 관한 연구)

  • Lee, Du-Hyoung;Alam, Syed Fakhar;Lee, Hye-Rheon;Sharma, Pankaj;Cho, Churl-Hee;Han, Moon-Hee
    • Membrane Journal
    • /
    • v.26 no.5
    • /
    • pp.381-390
    • /
    • 2016
  • In this study, the natural mordenite (MOR) zeolite seeds were used for the synthesis of high purity mordenite crystals. The effect of seed concentration and crystallization time on the phase purity and surface morphology of MOR crystals has also been reported. The diffraction, elemental and scanning analysis of MOR zeolite particles obtained from 100 g hydrothermal solution batch containing 3 g natural seed, hydrothermally treated at $140^{\circ}C$ for 72 h reveal the high phase-purity of as-synthesized sample having crystals of uniform size ($1-2{\mu}m$). Moreover, high seed concentration leads to the production of mesoporous MOR particles composed of needle shape primary nano crystallites. The gases adsorption performances of as-synthesized MOR particle were carried out at $25^{\circ}C$ and 0-1 bar. Surprisingly, MOR particles show good adsorption potential for $CO_2$ (97.19 mg/g) compared to other gases. Thus it confirms that high purity MOR particles can be synthesized without using any organic template which gives an advantage of separation performance at lower price.

Quality properties of texturized vegetable protein made from defatted soybean flour with different soybean seed coat contents (대두껍질 함량에 따른 탈지대두분말 식물조직단백의 품질 특성)

  • Chan Soon Park;Mi Sook Seo;Sun Young Jung;Seul Lee;Boram Park;Shin Young Park;Yong Suk Kim
    • Food Science and Preservation
    • /
    • v.30 no.5
    • /
    • pp.896-904
    • /
    • 2023
  • The texturization characteristics of textured vegetable protein (TVP) were investigated based on the extent of soybean decoating during the pretreatment of defatted soybean flour used for TVP. The raw materials for TVP consisted of 50% defatted soybean flour, 30% gluten, and 20% corn starch. The weight ratios of soybean seed coat to soybean flour were 9%, 6%, 3%, and zero. Extrusion was performed using an extruder equipped with a cooling die, maintaining a barrel temperature of 190℃ and screw speed of 250 rpm, Water was injected at a rate of 9 rpm using a metering pump. Regarding the textures of the extruded TVPs produced from defatted soybean flour, an increase in the soybean seed coat content led to a decrease in the apparent fibrous structural layer and an increase in hardness. However, there were no significant changes in elasticity and cohesion. Moreover, as the soybean seed coat content increased, the pH of TVPs decreased. A higher soybean seed coat content also tended to lower the moisture content, increasing water absorption, solids elution, and turbidity. These results suggest that an increased seed coat content reduces the proportion of protein, and the fibers present in the seed coats prevent texturization.

Calcium Removal from Effluent of Electronics Wastewater Using Hydrodynamic Cavitation Technology (수리동력학적 캐비테이션을 이용한 전자폐수 처리수에 함유된 칼슘저감에 관한 연구)

  • Park, Jin-Young;Kim, Sun-Jip;Lee, Yong-Woo;Lee, Jae-Jin;Hwang, Kyu-Won;Lee, Won-Kwon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.29 no.6
    • /
    • pp.715-721
    • /
    • 2007
  • Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

The Content and Risk Assessment of Heavy Metals in Herbal Pills (유통 환제의 유해 중금속 함량 및 위해도 평가)

  • Lee, Sung-Deuk;Lee, Young-Ki;Kim, Moo-Sang;Park, Seok-Ki;Kim, Yeon-Sun;Chae, Young-Zoo
    • Journal of Food Hygiene and Safety
    • /
    • v.27 no.4
    • /
    • pp.375-387
    • /
    • 2012
  • The objective of this study is investigation of contamination levels and assessment of health risk effects of heavy metals in herbal pills. 31 Items and 93 samples were obtained for this investigation from major herbal medicine producing areas, herbal markets and on-line supermarkets from Jan to Jun in 2010. Inductively coupled plasma mass spectrometer method was conducted for the quantitative analysis of Pb, Cd and As. In addition, the mercury analyzer system was conducted for that of Hg without sample digestion. The average contents of heavy metals in samples were as follows : 0.87 mg/kg for Pb, 0.08 mg/kg for Cd, 2.87 mg/kg for As and 0.16 mg/kg for Hg, respectively. In addition, the average contents of heavy metals in different parts of plants, including cortex, fructus, herba, radix, seed, algae and others were 0.63 mg/kg, 3.94 mg/kg, 1.42 mg/kg, 1.05 mg/kg, 0.16 mg/kg, 22.31 mg/kg and 10.17 mg/kg, respectively. After the estimations of dietary exposure, the acceptable daily intake (ADI), the average daily dose (ADD), the provisional tolerable weekly intake (PTWI) and the relative hazard of heavy metals were evaluated. As the results, the relative hazards compared to PTWI in samples were below the recommended standard of JECFA as Pb 3.1%, Cd 0.9%, Hg 0.5%. Cancer risks through slope factor (SF) by Ministry of Environment Republic Korea and Environmental Protection Agency was $4.24{\times}10^{-7}$ for Pb and $3.38{\times}10^{-4}$ for As (assuming that the total arsenic content was equal to the inorganic arsenic). Based on our results, possible Pb-induced cancer risks in herbal pills according to parts used including cortex, fructus, herba, radix, seed, algae and others were $1.95{\times}10^{-7}$, $1.45{\times}10^{-6}$, $2.14{\times}10^{-7}$, $6.27{\times}10^{-7}$, $1.99{\times}10^{-8}$, $3.61{\times}10^{-7}$ and $9.64{\times}10^{-8}$, respectively. Possible As-induced cancer risks in herbal pills by parts used including cortex, fructus, herba, radix, seed, algae and others were $1.54{\times}10^{-5}$, $7.24{\times}10^{-5}$, $1.23{\times}10^{-4}$, $2.02{\times}10^{-5}$, $3.25{\times}10^{-6}$, $2.18{\times}10^{-3}$ and $5.67{\times}10^{-6}$ respectively. Taken together, these results indicate that the majority of samples except for some samples with relative high contents of heavy metals were safe.

Maturity Evaluation and Determination of Aeration Time Using Germination Index of Co-Digestates (발아지수를 이용한 혼합 혐기소화액의 부숙도 평가 및 폭기기간 설정)

  • Byeon, Ji-Eun;Lee, Hong-Ju;Hwang, Sun-Goo;Rhim, Tae-Jin;Ryoo, Jong-Won
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.28 no.2
    • /
    • pp.5-13
    • /
    • 2020
  • This study was conducted to evaluate the effect of optimal aeration time of livestock manure slurry with fruits pomace on germination index. Six co-digestates of livestock manure slurry with fruits was aerated with 0.1 ㎥ air/㎥·min for 54 days. The maturity of digestates was evaluated using the germination method. The germination index(GI) of co-digestate of SS + CS + MP was more than 70 at the 30th day of aeration. The GI of co-digestate of SS + CS was more than 70 at the 36th day of aeration. The GI of digestate of swine manure slurry alone was 70 at the 54th day of aeration. The co-digestate of SS + MP caused to shorten 24 days of aeration period to reach GI of 70, compared to swine manure digestate. These results suggest that the germination index of seed could be used to establish the optimal aeration time for co-digestate of liquid fertilizer.