• Economic and Environmental Geology
• /
• v.24 no.1
• /
• pp.43-55
• /
• 1991

The Imgye area, in the NE Taebaegsan Region, consists of Precambrian granites and schist complex at the base and Paleozoic sedimentary rocks and amphibolite at cover. The granites in the area were previously thought to be Paleozoic in age, but recent geochronological data yields isotopic age ranging from $1837{\pm}82Ma$ to $2108{\pm}82Ma$ by Rb-Sr whole rock method. Therefore, basement-cover relations in the area should be reexamined. During the study, mylonite zone recognized along the contact boundary between Precambrian granites and Cambrian Jangsan Quartzite Formation. Mylonite zone has 150 - 250 m in width. Mylonitic rocks can divide into two groups; quartz mylonite derived from Jangsan Formation and mylonitic granites from Precambrian granites. Intensity of mylonitic foliation decreased toward the north. Amphibolite occurs as an intrusive sills within mylonite zone. Mineral fabrics and small scale shear zones are commonly seen in amphibolite. It indicates that intrusive age of amphibolite is synchronous to the formation of mylonite zone. Mylonite zone was reactivated as ductile thrust faults and forms the hinterland dipping imbricate zone during the Cretaceous Bulkuksa Orogeny. The near parallelism of mineral stretching lineation and long axis of strain ellipes indicates that the area is affected by a homogeneous pure shear flattening together with the variable components of simple shear.

• Economic and Environmental Geology
• /
• v.33 no.3
• /
• pp.173-180
• /
• 2000

Main aims of this study are to clarify petrochemistry of the granitic gneiss in the Durye-Suncheon area. The origin of the metamorphic rock is evaluated from the abundance of $Na_2O$, the $TiO_2$/$Al_2O_3$ratios, the Harker variation diagram and $Al_2O_3$($Na_2O$ +$K_2O$ + CaO) ratios of the major elements. and the frequency distribution and average abundance of the trace elements . The trace elements of the granitic gneiss in the studied area are compared with those of the granitic rocks with shales in the other areas. The abundance of $Na_2O$ is lower than 3.27% and the $TiO_2$/$Al_2O_3$ ratio is 0.04. Also the Harker's variation diagram indicate this granitic gneiss correspond to sedimentary origin or S-type granite. The average abundance for trace elements of the granitic gneiss is similar to that of the shale, and the frequency distribution shows extensive distribution and irregularly . But xenolith are observed in the field survey, it is evidence of igneous origin , and then origin of the granitic gneiss in studied area is S-type granite.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.87-99
• /
• 2012

Targeting 9 types of rocks, which have high frequency of excavation, the researcher has analyzed decreasing behaviors of elastic modulus due to water content. The elastic modulus decreasing behaviors have been classified into 5 steps by uniaxial compressive strength. The results indicate that all of 5 sedimentary rocks and andesite show single decreasing behavior and granite, rhyolite, and gneiss demonstrate another decreasing behavior. Moreover, sensitivity of water content in granite, rhyolite, gneiss is almost twice as fast as that of the other rocks and their residual value of elastic modulus is very low.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.21-35
• /
• 2008

Oil shale is a fine-grained sedimentary rock that includes organic matter called "kerogen". When the kerogen is heated at moderate temperature, petroleum-like liquids are produced through the kerogen. Although it has been reported that oil shale reserves are enormous in amount, totaling at least 2.9 trillion barrels of oil, a great deal of its reserves still remain untapped. This report presents the viability and recent state of oil shale development, which will further validate the feasibility of oil shale development as well as pertinent technology.

• Korean Journal of Remote Sensing
• /
• v.5 no.2
• /
• pp.109-122
• /
• 1989

The ISODATA method, which is one of the most famous of the square-error clustering methos, has been applied to two Chungju multivariate data sets in order to evaluate the effectiveness of the regional lithological mapping. One is an airborne radiometric data set and the other is a mixed data set of the airborne radiometric and Landsat TM data. In both cases, the classification of the Bulguksa granite and the Kyemyongsan biotite-quartz gneiss are the most successful. Hyangsanni dolomitic limestone and neighboring Daehyangsan quartzite are also classified by their typical lowness of the radioactive intensities, though it is still confused with some others such as water-covered areas and nearby alluvials, and unaltered limestone areas. Topographically rugged valleys are also classified as the same cluster as above. This could be due to unavoidable variations of flight height and the attitude of the airborne system in such rugged terrains. The regional geological mapping of sedimentary rock units of the Ockchun System is in general confused. This might be due to similarities between different sediments. Considarable discrepancies occurred in mapping some lithological boundaries might also be due to secondary effects such as contamination or smoothing in digitizing process. Further study should be continued in the variable selection scheme as no absolutely superior method claims to exist yet since it seems somewhat to be rather data dependent. Study could also be made on the data preprocessing in order to reduce the erratic effects as mentioned above, and thus hoprfully draw much better result in regional geological mapping.

• Journal of Korean Society of Forest Science
• /
• v.54 no.1
• /
• pp.25-35
• /
• 1981

Some physical and chemical properties of forest soils in Korea were analyzed for providing the reasonable management methods of forest lands, Among 375 soil series surveyed until 1979, 93 soil series of forest soils were classified and analyzed according to their characteristics. Firstly soil data were classified into 5 categories by weathered products and secondly were classified and analyzed by parent rocks. The results are as follows: 1) In forest soils characterized by weathered products volcanic ash soils were proved to be the most fertile and alluvial soils were turned out to be the most infertile soils. Residual soils on mountain and hill were mostly on the average in all kinds of soil properties analyzed except total soil depth. 2) Igneous rocks developed rather infertile soils containing large amount of organic matter and available $P_2O_5$ with relatively deep soil depth and strong acidity. On the other hand sedimentary rocks produced rather shallow soils containing small amount of organic matter and available $P_2O_5$ but they were relatively fertile with weak acidity. 3) Among igneous rocks basalt and trachyte produced very fertile soils and granite and andesite produced slightly infertile soils. 4) Among sedimentary rocks limestone soils had high fertility neutral in acidity but low amount of available $P_2O_5$ 6) Alluvial sand produced generally very infertile soils with great soil depth comparing with the arable alluvial land with high fertility.

• The Korean Journal of Petroleum Geology
• /
• v.4 no.1_2 s.5
• /
• pp.27-39
• /
• 1996

In the Cretaceous, the Gulf Coast Basin evolved as a marginal sag basin. Thick clastic and carbonate sequences cover the disturbed and diapirically deformed salt layer. In the Cretaceous the salinities of the Gulf Coast Basin probably matched the Holocene Persian Gulf, as is evidenced by the widespread development of supratidal anhydrite. The major Lower Cretaceous reservoir formations are the Cotton Valley, Hosston, Travis Peak siliciclastics, and Sligo, Trinity (Pine Island, Pearsall, Glen Rose), Edwards, Georgetown/Buda carbonates. Source rocks are down-dip offshore marine shales and marls, and seals are either up-dip shales, dense limestones, or evaporites. During this period, the entire Gulf Basin was a shallow sea which to the end of Cretaceous had been rimmed to the southwest by shallow marine carbonates while fine-grained terrigengus clastics were deposited on the northern and western margins of the basin. The main Upper Cretaceous reservoir groups of the Gulf Coast, which were deposited in the period of a major sea level .rise with the resulting deep water conditions, are Woodbinefruscaloosa sands, Austin chalk and carbonates, Taylor and Navarro sandstones. Source rocks are down-dip offshore shales and seals are up-dip shales. Major trap types of the Lower and Upper Cretaceous include salt-related anticlines from low relief pillows to complex salt diapirs. Growth fault structures with rollover anticlines on downthrown fault blocks are significant Gulf Coast traps. Permeability barriers, up-dip pinch-out sand bodies, and unconformity truncations also play a key role in oil exploration from the Cretaceous Gulf Coast reservoirs. The sedimentary sequences of the major Cretaceous reseuoir rocks are a good match to the regressional phases on the global sea level cuwe, suggesting that the Cretaceous Gulf Coast sedimentary stratigraphy relatively well reflects a response to eustatic sea level change throughout its history. Thus, of the three main factors controlling sedimentation (tectonic subsidence, sediment input, and eustatic sea level change) in the Gulf Coast Basin, sea-level ranks first in the period.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.25-31
• /
• 1995

In Dongnam area, Cretaceous igneous rocks, such as diorite, porphyritic granite, and quartz porphyry intruded Paleozoic sedimentary rocks, such as Myobong slate and Pungchon limestone. The Dongnam Fe-Mo skarn deposits were imposed on the diorite(endoskarn) and the Myobong slate(exoskarn). The ore deposits consist mainly of magnetite and molybdenite with small amounts of sulfides, such as galena, sphalerite, pyrite, chalcopyrite, and pyrrhotite. The igneous rocks show nearly constant $^{206}Pb/^{204}Pb(18.80{\sim}19.06)$ and $^{207}Pb/^{204}Pb(15.71{\sim}15.72)$ ratios. Their $^{207}Pb/^{204}Pb$ ratios higher than the typical ratios of orogene suggest that the igeneous rocks were formed from lower crust(or mantle) - derived magma excessively contaminated by upper crustal materials such as high radiogenic Precambrian basement rocks. The lead isotopic compositions of the igneous rocks, the Pungchon limestone, and the ore minerals show a well defined linear in $^{206}Pb/^{204}Pb$ - $^{207}Pb/^{204}Pb$ plot. The lead isotopic compositions of the igneous rocks are similar to those of magnetite and galena, which were formed at early skarn stage and significantly lower than those of altered quartz porphyry, molybdenites, and pyrite, which were formed at late epithermal alteration stage. Considering the systematic variation of the lead isotopic compositions in the ore minerals according to hydrothermal stages, the variation may be due to a relative variation in surrounding rock(Pungchon limestone) involvement in hydrothermal ore solution leaching the surrounding rock. Therefore, the variation of the lead isotopic compositions in ore minerals can be modeled in terms of the mixing of the leads derived from the igneous rocks as low radiogenic source and the surrounding rock(Pungchon limestone) as high radiogenic source.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.71-88
• /
• 2001

The Geochemica] and isotope studies on the $CO_2$-rich water from the Shinchon area were carried out. The Shinchon $CO_2$-rich water belongs to Ca(Na)-$HCO_3$ type showing very high $P_{CO_{2}}$ ( $10^{-0.35}$ ~ $10^{0.29}$ atm) and TDS (835-3,144 mg/L). The results of geochemical and isotope analysis indicate that $CO_2$ gas is originated from the deep seated source such as mantle or magmatic gases. The $CO_2$-rich water was evolved by interaction with deep-seated granite and major water-rock interaction was dissolution of p]agioclase resulting high Na content of $CO_2$-rich water. Precipitation and dissolution of secondary calcite might be accompanied with the dissolution of plagioclase maintaining Na/Ca ratio. High contents of K and $SO_4$ indicate that the geochemical characteristics of $CO_2$-rich water were partially affected by interaction with upper sedimentary rock during uprising to surface. N03 and tritium contents suggest that the $CO_2$-rich water was mixed with low $CO_2$ groundwater at some locations. The oxygen-hydrogen isotopes show that all water samples were derived from meteoric waters and the $CO_2$-rich water was isotopically re-equilibrated with lighter $CO_2$ gas. Although some carbon isotope data show isotopically heavy values, carbon isotope data indicate that the $CO_2$ gas was possib]y derived by deep source.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.455-469
• /
• 2007

The study area, Bonggil-ri, Gyeongju, SE Korea, is composed of Cretaceous sedimentary rocks, and Tertiary igneous rocks and dykes. A research on fracture developing history and density distribution was carried out on well exposed Tertiary granites. The fractures developed in this area have the following sequence; NW-SE trending duo-tile shear bands (set a), NNW-SSE trending extensional fractures (set d), WNW-ESE trending extensional or normal fractures (set b), NE-SW trending right-lateral fractures (set c), WNW-ESE trending reverse fault reactivated from normal faults (set e) and NW-SE trending left-lateral faults reactivated from shear bands (set a) under brittle condition. According to the result of fracture density analysis, the fracture density in this area depends on rock property rather than rock age, and also higher fracture density is observed around fault damage zones. However, this high fracture density may also be related to the cooling process associated with dyke intrusion as well as rock types and fault movement. Regardless of the reason of the high fracture density, high fracture density itself contributes to fluid flow and migration of chemical elements.