• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.12-20
• /
• 2021

Unsafe working environments slow down working speed in that it takes a lot of time to respond in case of an accident, greatly reducing the productivity of construction work. Therefore, proper safety management that does not impede the productivity of construction works is a very important factor for successful construction project. However especially in mega project, the mutual effects of safety management and productivity are complex. Therefore, this study establishes a causal model between safety management and productivity influencing factors based on effectiveness metrics, and analyzes the effect of increased site congestion due to excessive personnel input, irregular safety measures and inefficient change of work schedules. The result of this study, is expected to contribute to enhancing the competitiveness of the construction industry as the basis for establishing a safety management plan that can secure appropriate productivity.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.6
• /
• pp.393-402
• /
• 2020

In the membrane process, it is important to improve water treatment efficiency to ensure water quality and minimize membrane fouling. In this study, a pilot study of membrane process using reservoir water was conducted for a long time to secure high flux operation technology capable of responding to influent turbidity changes. The raw water and DAF(Dissolved Air Flotation) treated water were used for influent water of membrane to analyze the effect of water quality on the TMP (Trans Membrane Pressure) and to optimize the membrane operation. When the membrane flux were operated at 70 LMH and 80 LMH under stable water quality conditions with an inlet turbidity of 10 NTU or less, the TMP increase rates were 0.28 and 0.24 kPa/d, respectively, with minor difference. When the membrane with high flux of 80 LMH was operated for a long time under inlet turbidity of 10 NTU or more, the TMP increase rate showed the maximum of 43.5 kPa/d. However, when the CEB(Chemically Enhanced Backwash) cycle was changed from 7 to 1 day, it was confirmed that the TMP increase rate was stable to 0.23 kPa/d. As a result of applying pre-treatment process(DAF) on unstability water quality conditions, it was confirmed that the TMP rise rates differed by 0.17 and 0.64 kPa/d according to the optimization of the coagulant injection. When combined with coagulation pretreatment, it was thought that the balance with the membrane process was more important than the emphasis on efficiency of the pretreatment process. It was considered that stable TMP can be maintained by optimizing the cleaning conditions when the stable or unstable water quality even in the high flux operation on membrane process.

• The Southeast Asian review
• /
• v.28 no.4
• /
• pp.197-221
• /
• 2018

The Cambodian People's Party swept all 125 assembly seats with 76.78% of the vote in 2018 general elections. The Cambodian National Rescue Party, having been dissolved by court, was excluded from the election and attempted to nullify the legitimacy of the election by demanding its supporters to boycott the election. The Cambodian People's Party launched a campaign encouraging to vote in a desperate need to thwart the boycott movement. The election then became an unprecedented kind of competition the winner of which is decided not by the percentage of the vote but by turnout. The Cambodian People's Party was the winner with the high turnout of 82.89%, securing the means to defend the legitimacy of the election. The potential supporters of the Cambodian National Rescue Party spread out with about a million voters switching to support the Cambodian People's Party. Over a half million invalid votes that unequivocally voiced opposition to the Cambodian People's Party were not sufficient to deny the legitimacy of the election. Having experienced the fierce competition in the 2013 general elections that threatened to end its rule, the Cambodian People's Party decided to secure its power in the upcoming election and executed a tactic designed to remove the rival party through legal means. Competition being removed, the Cambodian political system decayed back to hegemonic electoral authoritarianism from competitive electoral authoritarianism to which it had mad gradual progress through the general elections in the past.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2009

Recently, in the security token based authentication system, there is an increasing trend of using fingerprint for the token holder verification, instead of passwords. However, the security of the fingerprint data is particularly important as the possible compromise of the data will be permanent. In this paper, we propose an approach for secure fingerprint verification by distributing both the secret and the computation based on the fuzzy vault(a cryptographic construct which has been proposed for crypto-biometric systems). That is, a user fingerprint template which is applied to the fuzzy vault is divided into two parts, and each part is stored into a security token and a server, respectively. At distributing the fingerprint template, we consider both the security level and the verification accuracy. Then, the geometric hashing technique is applied to solve the fingerprint alignment problem, and this computation is also distributed over the combination of the security token and the server in the form of the challenge-response. Finally, the polynomial can be reconstructed from the accumulated real points from both the security token and the server. Based on the experimental results, we confirm that our proposed approach can perform the fuzzy vault-based fingerprint verification more securely on a combination of a security token and a server without significant degradation of the verification accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.449-455
• /
• 2020

Inventory management is one of the important business functions for manufacturing companies to determine market responsiveness. Customers' needs are diversifying, and the life cycle of products is decreasing, thus increasing the importance of inventory management. However, for small-scale manufacturing companies, investing in an IT system for inventory management is practically difficult. In this study, we introduce an inventory and warehouse management model that can be applied simply and quickly in small-scale manufacturing companies. Firstly, we introduce the concept of the properties of inventory and provide an analytical methodology based on the age and quantity of the inventory. Secondly, in accordance with the properties of the inventory, we introduce location management rules for warehouse operation. To apply the proposed model, we studied a wallpaper manufacturing company and verified the applicability of the proposed methods in the field. The proposed model can be applied immediately as part of on-site improvement activities by small-scale manufacturing companies, and inventory management activities are expected to reduce bad long-term inventory and further secure storage capacity for warehouses.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.32 no.1
• /
• pp.391-413
• /
• 2021

Policy study information is the essential source of information in every step of decision making process to plan, execute and assess the national operation policy. The policy study subject of a national policy research center from study design the performance assessment on its practical effect is managed via thorough process to secure its effectiveness and efficiency. However, the directly exposed information to the practical user or the public who are in need of actual policy study information is the resource published in a form of policy study report, the final result. NKIS operated by the National Research Council for Economics, Humanities and Social Sciences under the Office for Government Policy Coordination, Prime Minister's Secretariat is a public information offering service that conduct integrated management on study reports from cooperative study among institutes along with policy outcome from 27 national policy research centers. This study aims to introduce the current status of operation and information management of NKIS, apprehend the management characteristics of policy study information resources of national policy research center, and deduce remarks that need to be considered for API with external service for the derivation of standardized sharing data element.

• Journal of Korea Water Resources Association
• /
• v.55 no.6
• /
• pp.461-469
• /
• 2022

It is very important to ensure the reliability of dam inflow data, which is critical in planning and managing the supply and demand of water resources in a basin. However, the simple water balance model sometimes results in negative inflows and does not consider the actual inflow characteristics. In this study, to address these issues, the existing water balance formula was modified by considering evaporation which is available for calculation among other outflows. The modified water balance formula was applied to the Soyang Dam. The results showed that the rate of negative inflows decreased in the re-evaluated dam inflow data and it was possible to secure consistency for the total inflow volume. In addition, investigating the water availability in the Soyang Dam watershed based on the water balance concept considering evaporation, it was found that direct water use in the human aspect was about 60%, and the indirect water use in the natural aspect was about 40%. In drought years, it was also confirmed that the proportion of indirect use of water resources increased.

• Journal of Space Technology and Applications
• /
• v.1 no.1
• /
• pp.23-32
• /
• 2021

The high-level Space Situational Awareness (SSA) objective is to provide to the users dependable, accurate and timely information in order to support risk management on orbit and during re-entry and support safe and secure operation of space assets and related services. Therefore the risk assessment for the re-entry of space objects should be managed nationally. In this research, the Software for Re-Entry Prediction of space objects (SREP) was developed for national SSA system. In particular, the rate of change of the drag coefficient is estimated through a newly proposed Drag Scale Factor Estimation (DSFE), and is used for high-precision orbit propagator (HPOP) up to an altitude of 100 km to predict the re-entry time and position of the space object. The effectiveness of this re-entry prediction is shown through the re-entry time window and ground track of space objects falling in real events, Grace-1, Grace-2, Tiangong-1, and Chang Zheng-5B Rocket body. As a result, through analysis 12 hours before the final re-entry time, it is shown that the re-entry time window and crash time can be accurately predicted with an error of less than 20 minutes.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.7
• /
• pp.299-306
• /
• 2022

In recent, sensors embedded in robots, equipment, and circuits have become common, and research for diagnosing device failures by learning measured sensor data is being actively conducted. This failure diagnosis study is divided into a classification model for predicting failure situations or types and a regression model for numerically predicting failure conditions. In the case of a classification model, it simply checks the presence or absence of a failure or defect (Class), whereas a regression model has a higher learning difficulty because it has to predict one value among countless numbers. So, the reason that regression modeling is more difficult is that there are many irregular situations in which it is difficult to determine one output from a similar input when predicting by matching input and output. Therefore, in this paper, we focus on input and output data with periodicity, analyze the input/output relationship, and secure regularity between input and output data by performing sliding window-based input data patterning. In order to apply the proposed method, in this study, current and temperature data with periodicity were collected from MMC(Modular Multilevel Converter) circuit system and learning was carried out using ANN. As a result of the experiment, it was confirmed that when a window of 2% or more of one cycle was applied, performance of 97% or more of fit could be secured.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.8
• /
• pp.29-36
• /
• 2022

The importance of subsurface information is becoming crucial in urban area due to increase of underground construction. The position of underground facilities should be identified precisely before excavation work. Geophyiscal exporation method such as ground penetration radar (GPR) can be useful to investigate the subsurface facilities. GPR transmits electromagnetic waves to the ground and analyzes the reflected signals to determine the location and depth of subsurface facilities. Unfortunately, the readability of GPR signal is not favorable. To overcome this deficiency and automate the GPR signal processing, deep learning technique has been introduced recently. The accuracy of deep learning model can be improved with abundant training data. The ground is inherently heteorogeneous and the spacially variable ground properties can affact on the GPR signal. However, the effect of ground heterogeneity on the GPR signal has yet to be fully investigated. In this study, ground heterogeneity is simulated based on the fractal theory and GPR simulation is carried out by using gprMax. It is found that as the fractal dimension increases exceed 2.0, the error of fitting parameter reduces significantly. And the range of water content should be less than 0.14 to secure the validity of analysis.