• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.233-243
• /
• 2010

A method is proposed of estimating Muskingum-Cunge parameters for natural streams using cross-sectional and longitudinal channel geometry and roughness coefficient data. Firstly, for various water-surface levels at a cross section cross-sectional areas and hydraulic radii are calculated. Corresponding discharges are then calculated using Manning's equation. This procedure is repeated for all cross-sections in the reach. Finally, routing parameters are estimated from the calculated cross-sectional area and discharge value pairs by regression analysis. The procedures for estimating Muskingum-Cunge parameters are applied to the South Han River. Flows calculated by Muskingum-Cunge model with estimated parameters showed much better agreement with those by dynamic wave model in peak discharge, time to peak discharge, and normalized RMS errors than those calculated by the HEC-1 Muskingum-Cunge model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.4
• /
• pp.183-190
• /
• 2018

This paper presents optimization of the main spar of Human-Powered Aircraft (HPA) wing. Mass minimization was attempted, while considering large torsional deformation of the beam. Sequential Quadratic Programming (SQP) method was adopted as a relevant tool to conduct structural optimization algorithm. An inner diameter and ply thicknesses of the main spar were selected as the design variables. The objective function includes factors such as mass minimization, constant tip bending displacement, and constant tip twist of the beam. For estimation of bending and torsional deformation, the geometrically exact beam model, which is appropriate for large deflection, was adopted. Properties of the cross sectional area which the geometrically exact beam model requires were obtained by Variational Asymptotic Beam Sectional Analysis (VABS), which is a cross sectional analysis program. As a result, maintaining tip bending displacement and tip twist within 1.45%, optimal design that accomplished 7.88% of the mass reduction was acquired. By the stress and strain recovery, structural integrity of the optimal design and validity of the present optimization procedure were authenticated.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.55-63
• /
• 2016

Nowadays, large container ships are continually developed and that's why the bow and stern structural stability problems by slamming become a significant more and more. However, due to the complexity of slamming, it is difficult to consider those problems at the design stage. For this reason, we attempt numerical analysis through SNUFOAM by generating the bow and stern two-dimensional cross-sectional grid in WILS JIP experiment at KRISO. Unlike the conventional method for the computation time saving, by setting the inlet flow conditions referred to the model test, we analyzed the slamming without applying the grid deformation method. As a result, when the stern model, as in the previous studies, it was possible to obtain quantitatively the fluid impulse is close to the experimental results. When the bow model, we can found the change by the position of force sensors which are derived for the bulbous bow and obtained fluid impulse and flow shape at slamming similar to the model test.

• Journal of Korean Academy of Nursing
• /
• v.40 no.4
• /
• pp.580-588
• /
• 2010

Purpose: The purpose of this study was to examine effects of decreased locomotor activity on mass, Type I and II fiber cross-sectional areas of ipsilateral and contralateral hindlimb muscles 21 days after establishing the Parkinson's disease rat model. Methods: The rat model was established by direct injection of 6-hydroxydopamine (6-OHDA, 50 ${mu}g$) into the left substantia nigra after stereotaxic surgery. Adult male Sprague-Dawley rats were assigned to one of two groups; the Parkinson's disease group (PD; n=17) and a sham group (S; n=8). Locomotor activity was assessed before and 21 days after the experiment. At 22 days after establishing the rat model, all rats were anesthetized and soleus and plantaris muscles were dissected from both ipsilateral and contralateral sides. The brain was dissected to identify dopaminergic neuronal death of substantia nigra in the PD group. Results: The PD group at 21 days after establishing the Parkinson's disease rat model showed significant decrease in locomotor activity compared with the S group. Weights and Type I and II fiber cross-sectional areas of the contralateral soleus muscle of the PD group were significantly lower than those of the S group. Conclusion: Contralateral soleus muscle atrophy occurs 21 days after establishing the Parkinson's disease rat model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1598-1607
• /
• 2006

The purpose of this study was to analyze the proportion of gathered skirts using a three-dimensional measurement system. And in this experiment, we have attempted to accumulate three-dimensional data of wearing model and find out adequate methods for analyzing shape of clothes. The experimental design consists of two factorial designs. We established three different kinds of fabrics, ratio of gathers. The measurement tool for three-dimensional model was whole body 3D scanner(Exima-WBS2H). Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. As the results show, there were different effect of gather and proportion of shapes among the measurements of width, thickness and areas made by different lines of vision in cross-sectional silhouette. And there were difference shapes of section area at each part of gathered skirts between vertical-outline silhouette and vortical-plane silhouette made by gathering conditions. And also the cross-sectional silhouettes and vertical silhouettes were related to shape of clothes.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.19-24
• /
• 2000

Effects of the cross-sectional dimension and moisture profile of wood specimens on the ultrasonic sound velocities of radiata pine heartwood and sapwood. Each moisture profile model specimen was made by composing five wood pieces with various moisture contents. As the cross-sectional dimensions decreased the ultrasonic velocities of both heartwood and sapwood decreased by 4~8%. In the ultrasonic signals transmitted through the specimens low frequency components more dominated than high frequency components as the dimension of cross section increased. The specimens with the same average MCs and different moisture profiles showed different ultrasonic velocities. By plotting the ultrasonic velocities against the average moisture contents of the inner three pieces of the moisture profile model specimens it was revealed that three distinct plot patterns existed.

• Structural Engineering and Mechanics
• /
• v.32 no.3
• /
• pp.447-457
• /
• 2009

A general analytical method for computing the joint stiffness from the sectional properties of the members that form the joint is derived using Vlasov's thin-walled beam theory. The analytical model of box T-joint under out-of-plane loading is investigated and validated using shell finite element results and experimental data. The analytical model of the T-joint is implemented in a beam finite element model using a revolute joint element. The out-of-plane displacement computed using the beam-joint model is compared with the corresponding shell element model. The results show close correlation between the beam revolute joint model and shell element model.

• Health Policy and Management
• /
• v.19 no.4
• /
• pp.33-52
• /
• 2009

Health promotion policies have needed to assess in detailed and evidence-based work to set a policy goal and clear future directions of health promotion in Korea. To identify the major factors related with health promotion, we assessed the associations between public health outcome (potential years of life loss, PYLL) and national health determinants. For this purpose, we used a pooled cross sectional time-series regression analysis with corrected fixed effect models involving sixteen member countries of the Organisation for Economic Cooperation and Development during the period 1970 to 2001. The PYLL was positively associated with tobacco and alcohol consumption (model 1 and 2) and calories intake (model 2 and 3) while the PYLL was negatively associated with GDP, fruit and vegetable intake (model 2), number of doctors (model 3), coverage rates of health care security, and elderly population rates (model 4). In conclusion, health behaviors related with tobacco, alcohol, and nutrition were significant health determinants for health outcome. Overall analysis results of this study will provide a guidance toward improved macro- and micro-policy development for future health promotion policy in Korea.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.275-281
• /
• 2001

We used the discrete-sectional model to analyze the particle growth by coagulation of particles in silane plasma reactor, considering the Gaussian distribution function for particle charges. The effects of process conditions such as monomer size and mass generation rate of monomers on particle growth in plasma reactor were analyzed theoretically/ Based on the Gaussian distribution function of particle charges, the large particles of more than 40 nm in size are almost found to be charged negatively, but some fractions of small, tiny particles are in neutral state or even charged positively. As the particle size and surface area increase with time by particle coagulation, the number of charges per particle increases with time. As the large particles are generated by particle coagulation, the particle size distribution become bimodal. The results of discrete-sectional model for the particle growth in silane plasma reactor were in close agreement with the experimental results by Shiratani et al. [3] for the same plasma conditions. We believe the model equations for the particle charge distribution and coagulation between particles can be applied to understand the nano-sized particle growth in plasma reactor.

• Wind and Structures
• /
• v.12 no.5
• /
• pp.413-424
• /
• 2009

A series of wind tunnel free-decay sectional model dynamic tests were conducted to examine the effects of torsional-to-vertical natural frequency ratio of 2DOF bridge dynamic systems on the aerodynamic and dynamic properties of bridge decks. The natural frequency ratios tested were around 2.2:1 and 1.2:1 respectively, with the fundamental vertical natural frequency of the system held constant for all the tests. Three 2.9 m long twin-deck bridge sectional models, with a zero, 16% (intermediate gap) and 35% (large gap) gap-to-width ratio, respectively, were tested to determine whether the effects of frequency ratio are dependent on bridge deck cross-section shapes. The results of wind tunnel tests suggest that for the model with a zero gap-width, a model to approximate a thin flat plate, the flutter derivatives, and consequently the aerodynamic forces, are relatively independent of the torsional-to-vertical frequency ratio for a relatively large range of reduced wind velocities, while for the models with an intermediate gap-width (around 16%) and a large gap-width (around 35%), some of the flutter derivatives, and therefore the aerodynamic forces, are evidently dependent on the frequency ratio for most of the tested reduced velocities. A comparison of the modal damping ratios also suggests that the torsional damping ratio is much more sensitive to the frequency ratio, especially for the two models with nonzero gap (16% and 35% gap-width). The test results clearly show that the effects of the frequency ratio on the flutter derivatives and the aerodynamic forces were dependent on the aerodynamic cross-section shape of the bridge deck.