• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.829-836
• /
• 2003

Understanding of heat generation in semiconductor devices is important in the thermal management of integrated circuits and in the analysis of the device physics. Scanning thermal microscope was used to measure the temperature and the electric potential distribution on the cross-section of an operating metal-oxide-semiconductor field-effect transistor (MOSFET). The temperature distributions were measured both in DC and AC modes in order to take account of the leakage current. The measurement results showed that as the drain bias was increased the hot spot moved to the drain. The density of the iso-potential lines near the drain increased with the increase in the drain bias.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.66-72
• /
• 2014

The local heat transfer and pressure drop of developed turbulent flows in the smooth convergent/divergent channels with rectangular and square cross-sectional areas along the axial distance have been investigated experimentally. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000. The channel hydraulic diameter ratios of 0.67 and 1.49 in the rectangular channel with 2 inclined walls and the ratios 0.75 and 1.33 in the square channel with 4 inclined walls are considered. The comparison showed that among the four channels the square divergent channel has the highest thermal performance at the identical mass flow rate, at the identical pumping power, and at the static pressure drop.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.113-119
• /
• 1998

Ship structures and aircraft structures are consisted of thin sheet alloy, so it is very important to understand the characteristics of fatigue crack propagation of that material and to establish the data base. The data for fatigue crack propagation behavior scatter very much even under identical experimental conditions with constant loading. The behavior of fatigue crack propagation under regular and irregular cyclic loadings is known to be highly affected by complicated factors such as plastic zone developed at the vicinity of crack tip and reduction of cross sectional area. In this paper, the controlled stress amplitude and overload fatigue crack propagation tests have been conducted to investigate the effect of varying factors such as plastic zone size near the crack tip and area reduction factor (AF) on the fatigue crack propagation behavior A better simulation of fatigue crack propagation behavior is found to be obtainable by using Wheeler and Willenborg models with AF effect.

• Journal of the Korean Society of Visualization
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2010

An experimental investigation of the flow around a vertical fence was carried out using a PIV velocity field measurement technique. The vertical fence was embedded in a turbulent boundary layer. The instantaneous velocity fields measured at cross-sectional planes reveal complex longitudinal vortices that vary in size and strength, developing from the upstream location. In the instantaneous vorticity and velocity field data, the shear flow separated from the fence top is highly turbulent and shows unsteady flow characteristics. The topography of the ensemble averaged velocity fields, especially the separation bubble formed behind the fence, shows that the spatial distributions of streamwise velocity (U) and vertical (V) are symmetric, the spanwise velocity (W) is skew-symmetric with respect to the central xy-plane(z=0).

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.272-273
• /
• 2004

Optical connector is prone to take environment attack since it is exposed to various environmental conditions. As the data bit rate is increased in the modern optical communication system. the stability of optical connector becomes more important issue in complex network comprising of many connection by connectors. In this research, to estimate the influence of defects of connector, especially surface scratches, on the transmission, surface scratches were intentionally introduced on the cross sectional surface of optical connector and the insertion loss, return loss. and BER were measured as functions of geometry and density of scratches, Environmental conditioning was also performed onto these connectors and the variations of basic optical characteristics mentioned above were measured. Based on this measurement the lifetime of connectors was estimated by statistical prediction method.

• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.131-138
• /
• 1998

Flame characteristics in a double concentric burner has been studied experimentally. Air is supplied through a central nozzle, methane/air premixture is supplied in a inner annular part, and coflowing shield air is supplied to minimize outside disturbances. Depending on flow rate and concentration, various flame shapes can be observed. As the flow rate difference between central air jet and annular premixed jet is varied, several distinctive flames are observed. Conditions of partially premixed flames are further investigated; nozzle attached rich premixed flame, inner lifted flame, and outer lifted flame. Using the Abel transformation of digitized images of flames, cross- sectional images of flames can be obtained, from which overall structure of flames can be identified. PLIF measurement of OR radical was also conducted. OR radicals were mainly distributed in diffusion flame region. From the difference of OR distribution between nozzle attached and lifted flames, similarity of OR distribution between tribrachial flame and lifted flames in this study are observed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1014-1019
• /
• 2003

It seems inevitable for residential buildings to be high-rise and allocated near traffic roads due to the overcrowding in urban area. Acoustic environment in those area has been seriously deteriorated by the increase of traffic vehicles. Commonly used sound barriers have a limitation in controlling noise due to diffraction noise of sound barrier. Hence sound barrier is not effective to attenuate noise especially for the residential units in high level. This work aims at evaluating noise reduction according to the tunnel section shape by using 1/5 scale model. We carried out a number of field measurements for 1/5 scale model of Noise Barrier Tunnel with various sectional shape. The results from predictions and the measurement show generally good agreement.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.99-103
• /
• 2002

A field test was peformed to estimate the thermal performance of the forced convection electric air heater by the experiment. Air temperature, flow rate and electrical power input were measured with the related measurement sensors, and acquisition methods for the measured data were studied to effectively estimate the thermal performance of the tested air heater. To determine the mean air temperature at the flow cross-section, measuring positions were chosen by considering the flow velocity profile and the equally divided cross-sectional area. From the experimental results, thermal efficiency is obtained as an indication of the tested electric air heater performance.

• Proceedings of the KSPS conference
• /
• 2005.11a
• /
• pp.185-188
• /
• 2005

We presents a new method for the measurement and analysis of the volume of the vocal tract using 3D magnetic resonance image. The relative ratios of volume A, B, and C, which are divided by the 2constriction points formed on the horizontal and vertical plane in vocal tract, take a decisive role indiscriminating Korean monophthong. Together with Fl-F2 and the minimum cross sectional area in the vocal tract, the relative ratios of the regional volumes were proved to be significant parameter in statistic viewpoint.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.876-876
• /
• 2001

Axisymmetric finite element model is developed to determine sound propagation characteristics in a circular duct lined with a poroelastic foam. The foam and air models are derived based on the Biot's theory and the Helmholtz equation respectively and finally result in a quadratic eigenvalue problem in the wave number. Some cross sectional mode shapes are shown and sound attenuations and phase speeds of some acoustic modes are given. Those of fundamental modes are compared with those by forced response solutions and those from measurement results. The influence of lining thickness is also described on sound propagation characteristics.