• KIEAE Journal
• /
• v.13 no.6
• /
• pp.121-128
• /
• 2013

This study attempted to explore the MC design methods of modular construction using discontinuous double module grids and further, the design methods of walls. Modular construction is generally characterized with multiple units called modules with a module dimension of 3M(300mm) appearing in the form of double grids. The discontinuous double grids including correction values and gap values occurs inevitably in the modular construction where units are joined horizontally. Therefore, it is desirable to carry out the MC design taking into account these discontinuous double grids. In this study, the MC design was applied to the plane of wooden houses in modular construction, going through a process of setting the size of pillars and inside dimensions, of determining the dimension of discontinuous double grids that occur during the assembly of units, and of setting the dimension of outer walls in conjunction with the derived dimensions. The dimension of outer walls was applied differently depending on the range of regional use by analyzing the energy performance with the materials used. Consequently, the materials and components of factory-produced buildings can be used directly without processing, and the suitability of the outer wall design can be pre-determined by previewing the calculation of the cross-sectional configuration and heat transmission coefficients of outer walls in modular construction, allowing to be used as a decision-making tool of design.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.379-388
• /
• 2002

For the success of dental implant, accurate radiographic evaluation is prerequisite for planning the location of the osseointegrated implants and avoiding injury to vital structures. CT/MPR(computed tomography/multiplanar reformation) shows improved visualization of inferior alveolar canal. In order to obtain cross-sectional images parallel to the teeth, the occlusal plane is used to orientate for the axial plane. If the direction of axial plane is not parallel to the occlusal plane, the reformatted cross-sectional scans will be oblique to the planned fixture direction and will not show the actual dimension of the planned fixture's location. If the available bone height which measured in the cross-sectional view is much greater than the actual available bone height, penetration of canal may occur. The aim of this study is to assess the effect of the axial plane to measurement of available bone height for dental implant in computed tomography of the mandible. 40 patients who had made radiographic stents and had taken CT were selected. The sites that were included in the study were 45 molar regions. In the central panoramic scan, the length from alveolar crest to superior border of inferior alveolar canal(available bone height, ABH) was measured in direction of reformatted cross-sectional plane(uncorrected ABH). Then, length from alveolar crest to superior border of canal was measured in direction of stent(corrected ABH). The angle between uncorrected ABH and corrected ABH was measured. From each ABH, available fixture length was decided by $Br{{\aa}}nemark$ system. The results were following ; the difference between two ABHs was statistically significant in both first and second molar(p< 0.01). The percentage of difference more than 1 mm was 8.7% in first molar and 15.5% in second molar. The percentage of difference more than 2 mm was 2.0% in first molar and 6.6% in second molar. The maximum value of difference was 2.5 mm in first molar and 2.2 mm in second molar. The correlations between difference of 2 ABHs and angle was positive correlations in both first and second molar. The correlation coefficient was 0.534 in first molar and 0.728 in second molar. The second molar has a stronger positive correlation. The percentage of disagreement between 2 fixture lengths from two ABHs was 24.4% in first molar and 28.9% in second molar.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.955-962
• /
• 2000

Scanning Probe Microscope (SPM) such as Scanning Tunneling Microscope (STM) and Atomic Force Microscope (AFM) was shown to be the powerful tool for nano-scale characterization of a fracture surface . AFM was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths (SW) and heights (SH) were measured from the cross sectional profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) Coincidence of the crack growth rate with the striation width was found down to the growth rate of 10-5 mm/cycle. (2) The relation of SH=0.085(SW)1.2 was obtained. (3) The ratio of the striation height to its width SH/SW did not depend on the stress intensity factor range K and the stress ratio R. (4) Not only the SW but also the SH changed linearly with the crack tip opening displacement (CTOD) when plotted in log-log scale. From these results, the applicability of the AFM to nano-fractography is discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1047-1054
• /
• 2001

Atomic Force Microscope (AFM) was used to study cross sectional profiles and dimensions of fatigue striations in 2017-T351 aluminum alloy. Their widths(SW) and heights (SH, SH(sub)h, SH(sub)ι) were measured from the cross sectional profiles of three-dimension AFM images. The following results that will be helpful to understand the fatigue crack growth mechanism were obtained. (1) The relation of SH=$\alpha$(SW)(sup)1.2 was obtained. (2) The ratio of the striation height to its width SH/SW, SH(sub)h/SW and SH(sub)ι/SW did not depend on the stress intensity factor range ΔK and the stress ratio R( =P(sub)min/P(sub)max = K(sub)min/K(sub)max). (3) Effect of precipitate on the morphology of striation was changed by the relative dimensional difference between the striation width SW and the precipitates. From these results, the applicability of the AFM to nano-fractography is discussed.

• The Research Journal of the Costume Culture
• /
• v.30 no.5
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.4
• /
• pp.57-66
• /
• 2023

PURPOSE: This research investigated clinical hazardous components and analyzed the proportion of sarcopenia among young Korean women. METHODS: The cross-sectional study included 1,236 women aged 20 to 29 years, categorized into two groups according to their skeletal muscle mass index (SMI). Of these, 20 participants were placed in the sarcopenia group, while 1,216 were included in the normal group. The analysis involved hazardous components including body dimensions, clinical indicators, and behavioral trait variables: height, weight, body mass index, waist circumference, skeletal muscle mass index, systolic and diastolic blood pressure, blood laboratory tests assessing fasting glucose, triglycerides, total cholesterol, as well as smoking habits and alcohol consumption. Complex sampling analysis was used to analyze the proportion and hazardous components of sarcopenia. RESULTS: The proportion of sarcopenia was at 1.76% (95% of CI: 1.08-2.83). Anthropometric measurements, such as height, BMI, and WC, exhibited significant differences between the groups (p < .05). However, there was no significant difference in weight (p > .05) between the two groups. Among the clinical indicators, SBP, DBP, FBG, serum triglycerides, and total TC found to be significant hazardous components for sarcopenia within both groups (p < .05). Smoking status as a behavioral trait was significant as well (p < .05), unlike alcohol consumption (p > .05). CONCLUSION: This study discerned both the proportion of sarcopenia and the hazardous components associated with it among community-dwelling women of a young age.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.17.1-17.7
• /
• 2016

Objectives This study aimed to evaluate the relationship between residential district of people, such as power plant, steel-mill and petrochemical industries, and health-related quality of life (HRQoL). Methods Using a cross-sectional study design, we randomly recruited participants for our study from industrial areas (thermoelectric power plant, steel-mill, petrochemical industry) and rural areas. Logistic regression analysis was used to identify the relationships between Euro quality of life-5 dimension (EQ-5D) scores and living region, while controlling for sociodemographic characteristics. Results In adjusted model, quality of life decreased with increasing category of age and were lower for females than males. EQ-5D scores of people living in the vicinity of thermoelectric power plant were significant lower than those of people living the vicinity of comparison region (odds ratio, 1.59; 95% confidence interval, 1.00 to 2.53). Conclusions Living region of thermoelectric power plant, was strongly associated with scores on the EQ-5D. More research is needed to elucidate the mechanisms which makes the relationship with the living regions and HRQoL.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.997-1009
• /
• 1999

Silica particle formation and growth process including chemical reaction, coagulation and sintering was studied in a counterflow diffusion flame burner. The counterflow geometry provides a one dimensional flow field, along the stagnation point streamline, which greatly simplifies interpretation of the particle growth characteristics. $SiCl_4$ has been used as the source of silicon in hydrogen/oxygen/argon flames. The temperature profiles obtained by calculation showed a good agreement with experiment data. Using one and two dimensional sectional method, aerosol dynamics equation in a flame was solved, and these two results were compared. The two dimensional section method can consider sintering effect and growth of primary particle during synthesis, thus it showed evolution of morphology of non-spherical particles (aggregates) using surface fractal dimension. The effects of flame temperature and chemical loading on particle dynamics were studied. Geometric mean diameter based on surface area and total number concentration followed the trend of experiment results, especially, the change of diameters showed the sintering effect in high temperature environment.

• Structural Engineering and Mechanics
• /
• v.49 no.3
• /
• pp.285-296
• /
• 2014

Material damping affects the dynamic behaviors of engineering structures considerably, but up to till now little research is maintained on influence factors of material damping. Based on the damping-stress function of steel, the material damping of steel beams is obtained by calculating the stress distribution of the beams with an analytical method. Some key influence factors of the material damping, such as boundary condition, amplitude and frequency of excitation, load position as well as the cross-sectional dimension of a steel beam are analyzed respectively. The calculated results show that even in elastic scope, material damping does not remain constant but varies with these influence factors. Although boundary condition affects material damping to some extent, such influence can be neglected when the maximum stress amplitude of the beam is less than the fatigue limit of steel. Exciting frequency, load position and cross-section dimension have great effects on the material damping of the beam which maintain the similar changing trend under different boundary conditions respectively.

• Wind and Structures
• /
• v.22 no.5
• /
• pp.573-594
• /
• 2016

Simultaneous pressure measurements on 2D square prisms with various corner modifications were performed in uniform flow with low turbulence level, and the testing Reynolds numbers varied from $1.0{\times}10^5$ to $4.8{\times}10^5$. Experimental models were a square prism, three chamfered-corner square prisms (B/D=5%, 10%, and 15%, where B is the chamfered corner dimension and D is the cross-sectional dimension), and six rounded-corner square prisms (R/D =5%, 10%, 15%, 20%, 30%, and 40%, where R is the corner radius). Experimental results of drag coefficients, wind pressure distributions, power spectra of aerodynamic force coefficients, and Strouhal numbers are presented. Ten models are divided into various categories according to the variations of mean drag coefficients with Reynolds number. The mean drag coefficients of models with $B/D{\leq}15%$ and $R/D{\leq}15%$ are unaffected by the Reynolds number. On the contrary, the mean drag coefficients of models with R/D=20%, 30%, and 40% are obviously dependent on Reynolds number. Wind pressure distributions around each model are analyzed according to the categorized results.The influence mechanisms of corner modifications on the aerodynamic characteristics of the square prism are revealed from the perspective of flow around the model, which can be obtained by analyzing the local pressures acting on the model surface.