• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.35-41
• /
• 2005

We investigated the effects of skin hydration and anti-irritation of exopolysaceharide (GF-glucan) produced from submerged culture of Grifola frondosa. The moisturizing effects and trans-epidermal water loss (TEWL) of GF-glucan in cosmetic products (O/W emulsion) were clinically studied. GF-glucan showed good skin hydration effects when compared with sodium hyaluronate which is a commonly using moisturizer. The skin protective effects of GF-glucan against sodium lauryl sulfate (SLS) were also found. Twice a day application of the CF-glucan to skin reduced local inflammation remarkably. Irritant reactions were assessed by various aspects of skin function, erythema (skin color reflectance), hydration (electrical capacitance) and TEWL. In the human skin test, 5-day treatment of the GF-glucan was found to reduce SLS-induced skin erythema and Improve bier regeneration. Taken all together, GF-glucan should be a very useful cosmetic ingredient, as a moisturizer, and a protecting agent for various skin irritations.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.9-18
• /
• 2019

Concrete, which is the most widely used building material in modern times, has been improved not only in strength but also in structural performance such as increase in toughness and ductility, weight reduction, and improvement in quality of human life. Due to the surge in demand for the building, there is a tendency to be used variously from architectural panel and architecture to interior accessories. In Korea, a light-transmitting concrete, LEFC(Light Emotion Friendly Concrete), that insert plastic rods to stimulate emotional sensation through the combination of light and concrete has developed. In previous research, it was confirmed that the use of a synthetic foam agent rather than an animal foam agent did not cause a fogging phenomenon. In this study, lightweight by applying foaming agent to LEFC and two types of fiber (Nylon Fiber, Polyvinyl Alcohol) were compared to achieve to investigate the fiber to be applied in future. An equation that can predict the loss and adhesion reduction of the concrete section according to the diameter of the rod (5mm, 10mm) and the interval (10mm, 15mm, 20mm) was proposed.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.520-533
• /
• 2021

It is necessary to increase the blasting efficiency in order to minimize the economic loss caused when the excavation cross section is reduced due to the stability problem of underground mining development, and for this, a new blasting design is proposed. In this study, the blasting efficiency of the general design in the field, the suggestion designI, which added two columns to production blasting, and the suggestion design II, which added one column to create asymmetry, is compared. Advance rate and fragmentation were selected as the evaluation index of the blasting efficiency. In the case of advance rate, compared to the normal, the suggestionI improved by 6.07% and the suggestionII improved by 4.65%. In the case of fragmentation, based on P80, compared to the normal, the suggestionI reduced about 58% and the suggestionII was about 47%. Accoording to the evaluation index, the suggestion designI shows better blasting efficiency than the suggestion designII. But considering the additional work time and cost required for the suggestion designI due to the insignificant difference in the evaluation index results, the asymmetry V-cut, the suggestion designII, is judged to be a more suitable blasting design for the site.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.363-372
• /
• 2022

Precast concrete is an effective method to increase the construction quality and construction speed by optimizing and making the manufacturing conditions similar. In order to more effectively produce a fireproof material-integrated precast duct slab, the purpose of this study was to determine whether the fire resistance performance of the fireproof layer is maintained when a method of increasing the curing rate using a hardening accelerator is used. As a result of performing a fire resistance performance test on specimens classified according to whether or not the hardening accelerator was included, increase of temperature inside the specimen was high in the specimens using the hardening accelerator, and the section loss of the fireproof layer occurred locally on the surface exposed to fire heating. In conclusion, it is judged that the fireproof layer in the case where the strength at 3th day of age is gained within 1 day curing age using a hardening accelerator does not guarantee sufficient fire resistance performance in the conditions used in this study.

• Journal of Christian Education in Korea
• /
• v.68
• /
• pp.175-216
• /
• 2021

This essay aims to seek an alternative model of catechesis, as this form of education faces various challenges from the Korean Church especially during COVID-19 pandemic. For a long time, catechesis in the Korean Church narrowly focused on the act of producing Christians who would be loyal to the local church, rather than focusing on nurturing members loyal to Christ, an issue that has been problematized in recent publications on catechesis. Thus, the loss of social trust in the Korean Church and the decline of its public image exemplify how this type of catechesis as disciple-making for local church's benefit, mostly nurtures a vertical dimension of faith. The current teaching and learning method mostly employs a unilateral transfer of doctrine from the teacher to the learner and emphasizes the memorization of doctrine. This type of instruction renders the catechesis as the most lackluster and outdated form of Christian education. This essay aims to reconceptualize the traditional model of catechesis. This essay first critically evaluates current situations of catechesis and presents several alternative meanings on the concept of doctrine. Then it explores the theories of catechesis through different models posed by Christian educators such as John Westerhoff III and Richard Osmer. The final section is devoted to presenting an alternative form of catechesis that focuses on seeking holistic faith.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.2
• /
• pp.48-55
• /
• 2022

The color image of the brand comes first and is an important visual element that leads consumers to the consumption of the product. To express more effectively what the brand wants to convey through design, the printing market is striving to print accurate colors that match the intention. In 'offset printing' mainly used in printing, colors are often printed in CMYK (Cyan, Magenta, Yellow, Key) colors. However, it is possible to print more accurate colors by making ink of the desired color instead of dotting CMYK colors. The resulting ink is called 'spot color' ink. Spot color ink is manufactured by repeating the process of mixing the existing inks. In this repetition of trial and error, the manufacturing cost of ink increases, resulting in economic loss, and environmental pollution is caused by wasted inks. In this study, a deep learning algorithm to predict printed spot colors was designed to solve this problem. The algorithm uses a single DNN (Deep Neural Network) model to predict printed spot colors based on the information of the paper and the proportions of inks to mix. More than 8,000 spot color ink data were used for learning, and all color was quantified by dividing the visible light wavelength range into 31 sections and the reflectance for each section. The proposed algorithm predicted more than 80% of spot color inks as very similar colors. The average value of the calculated difference between the actual color and the predicted color through 'Delta E' provided by CIE is 5.29. It is known that when Delta E is less than 10, it is difficult to distinguish the difference in printed color with the naked eye. The algorithm of this study has a more accurate prediction ability than previous studies, and it can be added flexibly even when new inks are added. This can be usefully used in real industrial sites, and it will reduce the attempts of the operator by checking the color of ink in a virtual environment. This will reduce the manufacturing cost of spot color inks and lead to improved working conditions for workers. In addition, it is expected to contribute to solving the environmental pollution problem by reducing unnecessarily wasted ink.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.87-96
• /
• 2023

There are a lot of difference between the surface settlement and the differential settlement measured at the Busan New Port, where the dredged and reclaimed clay layer exists and below the clay is originally thickly distributed. To find the cause and solution of this, the actual conditions of each differential settlement used for the soft ground improvement, characteristics, installation method, measurement frequency, measurement data management, and data analysis of each type were considered. In the deep soft ground improvement work where large deformation occurs, the bending deformation of the screw-type differential settlement gauge is less than that of other types of measuring instruments, so there is less risk of loss, and the reliability of data is relatively high as the instruments are installed by drilling for each stratum. Since the greater the amount of high-precision settlement measurement data, the higher the settlement analysis precision. It is necessary to manage with higher criteria than the measurement frequency suggested in the standard specification. For the data management of the differential settlement gauge, it is desirable to create graphs of the settlement and embankment height of the relevant section over time, such as surface, differential, and settlement of pore water pressure gauge for each point. In the case of multi-layered ground with different compression characteristics, it is more appropriate to perform settlement analysis by calculating the consolidation characteristics of each stratum using a differential settlement data.

• Science of Emotion and Sensibility
• /
• v.25 no.4
• /
• pp.119-128
• /
• 2022

This study analyzes the effects of the number of angles and bends on resistance in a conductor-embroidered stitch circuit for efficient power transfer through a conductor of wearable energy harvesting to study changes in power lost through connection with actual solar panels. In this study, the angle of the conductive stitch circuit was designed in units of 30˚, from 30˚ to 180˚, and the resistance was measured using an analog Discovery 2 device. The measured resistance value was analyzed, and in the section of the angle where the resistance value rapidly changes, it was measured again and analyzed in units of 5˚. Following this, from the results of the analysis, the angle at which the tension was applied to the stitch converges was analyzed, and the resistance was measured again by varying the number of bends of the stitch at the given angle. The resistance decreases as the angle of the stitch decreases and the number of bends increases, and the conductor embroidery stitch can reduce the loss of power by 1.61 times relative to general embroidery. These results suggest that the stitching of embroidery has a significant effect on the power transfer in the transmission through the conductors of wearable energy harvesting. These results indicate the need for a follow-up study to develop a conductor circuit design technology that compares and analyzes various types of stitches, such as curved stitches, and the number of conductors, so that wearable energy harvesting can be more efficiently produced and stored.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.5
• /
• pp.615-624
• /
• 2010

This study was conducted to investigate the use of sugar alcohols as alternative sweeteners for replacing sucrose in sponge cake. The sponge cakes were prepared with only sucrose or a 50% replacement of sucrose with various sugar alcohols (erythritol, sorbitol, and xylitol). The specific gravity of cake batter containing only sucrose was significantly higher and the viscosity was significantly lower than those containing sugar alcohol (p<0.001). Among sugar alcohols, xylitol was the most similar to sucrose. The thermal characteristics, as assessed by differential scanning calorimetry, showed that sucrose delayed gelatinization of cake batter more than sugar alcohol, as the onset temperature and the peak temperature of cake batter containing only sucrose were higher than those containing sugar alcohol. The moisture content of cake containing sorbitol was the highest and that containing only sucrose was the lowest among cakes. The specific volume of cakes containing only sucrose and xylitol were higher and the baking loss rate of those were lower than other sugar alcohols. The volume and symmetry index of cake containing only sucrose were the highest among cakes (p<0.001), and xylitol was similar to sucrose for the above indices. The redness (a) and yellowness (b) values of crust containing only sucrose were significantly higher than those containing sugar alcohols (p<0.001). The a and b values of crumb containing erythritol were the lowest among cakes, showing a pale yellowish color. The microstructure, as assessed by scanning electron microscopy, showed that the cake containing only sucrose had more uniformly and finely distributed pores and a smoother cross section than that containing sugar alcohols. Cake containing xylitol was similar to cake containing only sucrose. Hardness, chewiness, and gumminess of cake containing only sucrose were higher than those containing sugar alcohols, whereas the adhesiveness of cakes containing sugar alcohols were higher than those containing only sucrose (p<0.01). Among sugar alcohols, xylitol was the most similar to sucrose in textural properties. In a sensory quality test, the tenderness and moistness of cakes containing sorbitol and erythritol were higher than those containing only sucrose and xylitol. The overall acceptance of cakes containing xylitol and only sucrose were higher than those containing sorbitol and erythritol (p<0.001). Thus, xylitol is more appropriate as a 50% replacement for sucrose than erythritol and sorbitol when preparing sponge cake.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.2
• /
• pp.63-75
• /
• 2024

Drinking water is an essential element to ensure the basic human right to live, and the quality of clean water must always be ensured. However, domestic water facilities, which were installed intensively in the early 2000s, are deteriorating. The accidents such as discoloration of water such as chromaticity and turbidity as well as leakage of substances frequently occur. However, since it is virtually impossible to replace all water pipes, the detailed standards for maintenance of water pipe network facilities established in 2021 require water pipe cleaning. The swab pig method, one of the water pipe cleaning methods, is a method of physically removing substances in pipes and is evaluated as having the highest cleaning efficiency. However, Swab is highly likely to be damaged or deformed during the cleaning process, and may even be lost. Therefore, in this study, the material of the pig was changed to a material with high compressibility, and it was made as close as possible to the inner wall of the water pipe. And, to maximize cleaning efficiency, a rotation swab pig with a rotation blade was developed. In addition, high-strength wire and winding equipment were additionally developed to eliminate the possibility of loss and to determine the location of the pig. The inlet and outlet are connected with wires, and after verifying the performance of each detailed technology, the technology was applied on a test bed with a 30m section. As a result of the application, the performance of the technology was verified by measuring the process time and evaluating applicability.