• 한국전자파학회지:전자파기술
• /
• 제5권3호
• /
• pp.14-21
• /
• 1994

본 논문에서는 임의의 형태와 매질성분을 갖는 3차원 물체의 RCS(Radar Cross Section)를 구하기 위한 수 치켜 방법을 제시한다 RSC는 3차원 경계요소볍(3-DBEM)을 사용하여 다충산란체에 관한 표면적분방정식을 해석함으로서 구한다. 본 논문에서는 3차원적 경계요소법의 타당성과 유용성을 보이기 위하여 산란체의 형태를 비스듬한 입사전계로 부터 다충 정6변체 및 직6면체를 선택하였으며, 손실을 갖는 유전체 및 자성체의 경우에도충분히 적용될수 있도록 고찰하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.311-315
• /
• 2008

Currently, in automobile industry. the efforts to reduce the manufacturing cost by changing the process of manufacturing are continually performed. In this paper, we proposed a new manufacturing process, the roll bending of a ring plate of automotive fuel tank instead of conventional press blanking process to reduce material loss and manufacturing cost. Finite element analysis was used to optimize the roll bending process to assure rectangular cross-section of the ring plate. Also, spring-back analysis after the roll bending was performed and dimension of the bending die considering spring-back was analyzed. Finally, we verified a possibility for realization of the proposed method shape with prototypes.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.100-106
• /
• 2009

As an effort to prevent environmental problems caused by ozone depletion and global warming, alternative refrigerants are being developed, and one of the candidates is carbon dioxide. To overcome slightly low efficiency of $CO_2$ refrigeration system, air-conditioning cycle using an ejector was suggested. Ejector compensates throttling loss in an expansion device by reducing compression work. In this study, the ejector refrigeration cycle using $CO_2$ as a refrigerant is investigated to understand the effect of the mixing section diameter and refrigerant charge amount on the performance. If mixing section diameter is too large or too small, either cases show low performance. The optimum refrigerant charge amount which gives the best performance is found for standard operating conditions. The air-conditioning cycle was analyzed for several operating conditions.

• Earthquakes and Structures
• /
• 제25권1호
• /
• pp.69-78
• /
• 2023

Life-cycle performance analysis of a reinforced concrete box section bridge was generated. Moreover, Monte Carlo simulation with important sampling (IS) was used to simulate the bridge material and load uncertainties. The bridge deterioration model was generated with the basic probabilistic principles and updated according to the measurement data. A genetic algorithm (GA) with the response surface model (RSM) was used to determine the deterioration rate. The importance of health monitoring systems to sustain the bridge to give services economically and reliably and the advantages of fiber-optic sensors for SHM applications were discussed in detail. This study showed that the most effective loss of strength in reinforced concrete box section bridges is corrosion of the reinforcements. Due to reinforcement corrosion, the use of the bridge, which was examined, could not meet the desired strength performance in 25 years, and the need for reinforcement. In addition, it has been determined that long-term health monitoring systems are an essential approach for bridges to provide safe and economical service. Moreover the use of fiber optic sensors has many advantages because of the ability of the sensors to be resistant to environmental conditions and to make sensitive measurements.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.444-450
• /
• 2024

Based on multiple measurements of ionization loss, the Time Projection Chamber (TPC) combines strong tracking ability with particle identification ability in a large momentum range, which is an important advantage of TPC detection technology over traditional ionization measurement technology. According to these two characteristics of TPC, applying it to the measurement of fission cross-section can greatly improve the measurement accuracy. During the measurement of the fission cross-section, the number of target nuclei is required to be accurately measured. So this paper introduces a method for measuring the number of ²³⁵U target nuclei using a fission TPC system. The measurement result agrees with the reference value, and relative error is around 1 %.

• ETRI Journal
• /
• 제46권1호
• /
• pp.59-70
• /
• 2024

We introduce a high-performance named entity recognition (NER) model for written and spoken language. To overcome challenges related to labeled data scarcity and domain shifts, we use transfer learning to leverage our previously developed KorBERT as the base model. We also adopt a meta-pseudo-label method using a teacher/student framework with labeled and unlabeled data. Our model presents two modifications. First, the student model is updated with an average loss from both human- and pseudo-labeled data. Second, the influence of noisy pseudo-labeled data is mitigated by considering feedback scores and updating the teacher model only when below a threshold (0.0005). We achieve the target NER performance in the spoken language domain and improve that in the written language domain by proposing a straightforward rollback method that reverts to the best model based on scarce human-labeled data. Further improvement is achieved by adjusting the label vector weights in the named entity dictionary.

• 한국터널지하공간학회 논문집
• /
• 제15권1호
• /
• pp.25-31
• /
• 2013

본 논문은 지하철 터널 유지관리 계측센서의 총 손망실율을 산정하기 위해 국내와 국외의 지하철 터널구조물에 설치되어 운영 중에 있는 유지관리 계측센서의 손망실 현황을 조사하고 분석을 실시하였다. 지하철 터널 유지관리 계측센서 설치 후 5~6년 경과된 시점을 기준하여 총 손망실율은 서울지하철5,6,7호선에서 14.2%, 서울지하철9호선1단계구간에서 14.8%, 영국의 Channel tunnel에서 13.9%로 모두 15%에 근접하게 나타났다. 따라서 지하철 터널 유지관리 계측센서의 총 손망실율은 잠정적으로 15%로 설정하여 설계에 반영하는 것이 타당한 것으로 판단되며, 향후 장기간의 경과년수에 따른 계측항목별 손망실율 연구가 필요할 것으로 판단된다.

• 대한간호학회지
• /
• 제20권2호
• /
• pp.131-141
• /
• 1990

Recently, the rate of cesarean section in Korea has been increasing. The results of several previous studies in foreign countries on the emotional responses of cesarean section mothers showed that they might experience difficulties in the mother- infant interaction due to fatigue, lack of early mother - infant interaction, disappointments, anger, feelings of loss of control, and other factors. Human behavior is said to be determined by one's self concept, and self concept is influenced by both internal and external environmental factors. A scale to measure the self concept of cesarean section mothers was needed in order to identify those who might have difficulties in the mother- infant interactions in future. The purposes of this study were to develop a measuring scale, and to test its reliability and validity. The process of this study was as follows. A structured interview was done with 50 cesarean section and vaginal delivery mothers to find their state of emotional reaction after giving birth to their babies. Based on the results of the interviews, a 50 items Likert scale was developed. The self concept of 268 cesarean section and vaginal delivery mothers who were hospitalized at six hospital in seoul were measured, during the period between Feb. 1 and April 30. Reviewing the discriminating power of each item by means of crosstabulation, ten items were selected for the final scale. The reliability and validity of this ten item scale were tested by Cronbach's alpha and t-test, using spss pc＋package. The results of this study and recommendation are as follows. 1. The ten selected items were as follows. I feel pains in my breast. (－) I have a good appetite now. (＋) I feel pains in my flank. (－) I feel fine now. (＋) My body seems to have returned to its prepregnant state. (＋) Thinking of the delivery process, I feel sorry. (－) I want to hold my baby in my arms. (＋) I want to keep my own life, even if I became a mother. (－) I want to delegate the care of the baby to my mother / mother in law. (－) I think baby is my alter ego. (＋) 2. The reliability of this scale was tested by Cronbach's alpha, and the coefficient of this scale was .8066. 3. The construct validity of this scale was tested by means of known group methods. The value of self concept for cesarean section mother was significantly lower than for vaginal delivery mothers(t＝-5.51, df＝266, p＝0.007). 4. The criterion validity of this scale was tested indirectly. Though this scale could discriminate the differences in the self concept between cesarean section and vaginal delivery mothers, the five items on the personal self concept scale didn's show any differences between cesarean section and vaginal delivery mothers. Therefore, the study indicates that those who shows lower values in the personal self concept measurement, that is, lower than 12.03 points, could be regaled as “risk mothers” 5. Further studies using this scale to clarify the influencing factors on negative self concept are strongly recommended.

• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.689-695
• /
• 2012

지지격자가 있는 봉다발과 축방향으로 평행한 유동에서, 봉다발 마찰계수와 지지격자 손실계수를 평가하였다. 시험부는 외경 9.5 mm, 길이 2000 mm 인 봉 25 개를 $5{\times}5$ 정사각 구조로 배열하여 제작하였으며, 봉 중심간 거리와 봉 외경의 비는 1.35 였다. 지지격자로는 plain 지지격자, split-vane 지지격자, hybrid-vane 지지격자를 이용하였다. 지지격자가 없는 봉다발의 마찰계수는 기존 상관식과 비교적 잘 일치하였다. 지지격자가 있는 봉다발 실험의 경우, hybrid-vane 지지격자에서 봉다발 마찰계수 및 지지격자 손실계수가 가장 크게 측정되었으며, 이는 지지격자의 유동단면 막음비 증가와 혼합날개 형상에 의한 유동 교란이 증가되기 때문인 것으로 판단된다. Re=$5{\times}10^5$ 조건에서 plain 지지격자, split-vane 지지격자, hybrid-vane 지지격자의 손실계수는 약 0.79, 0.80, 0.88 로 예측되었다.

• 대한기계학회논문집B
• /
• 제38권2호
• /
• pp.115-120
• /
• 2014

자동차용 터보차저 압축기의 성능 개선을 위해 원주방향의 볼류트 입구 높이들이 수정되었고 디퓨저를 포함한 볼류트에 대한 유동장이 상용 소프트웨어를 사용하여 조사되었다. 기본적으로 잘 설계된 볼류트는 높은 압력회복계수와 낮은 전압력손실계수를 보여주어야 한다. 본 연구에서는 동일한 단면형상과 설단면각(Tongue Angle)을 가지나 원주방향으로는 서로 다른 볼류트 입구 높이를 갖는 두 경우의 원형단면 볼류트가 선정되었다. 하나는 $90^{\circ}$ 원주방향에서는 단면 중앙으로 유입되나 이후의 원주방향에서는 볼류트 단면 최하단부들을 잇는 접선과 동일한 높이를 유지하면서 점진적으로 하단부로 유입되는 볼류트 형상이다(케이스 1 볼류트). 다른 하나는 설단면에서는 접선방향으로 유입되도록 모든 원주방향에 대하여 입구 높이를 2 mm 낮춘 형상이다(케이스 2 볼류트). 해석결과, 케이스 2 볼류트가 케이스 1 볼류트보다 높은 압력회복계수로 인한 높은 전압력비와 낮은 전압력손실계수로 인한 높은 등엔트로피 효율을 보여주었다.