• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.151-156
• /
• 2009

Forward modelling of ground penetrating radar (GPR) data is implemented using a new finite element ray tracing technique. The method is different from conventional ray tracing techniques in that the radar cross section of buried targets, the effective area of the receiving antenna, and the attenuation along the raypath are computed. The forward models are used to understand radar signatures measured across various ground structures which are important in detecting engineering hazards at construction sites, void spaces beneath simulated road beds, as well as a learning tool to avoid pitfalls in radargram interpretation. Forward modelling of radar data also can be used in predicting possible structures present at cultural property sites.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3158-3163
• /
• 2021

Chromium material is commonly used for fusion plasma facing applications because of the low neutron activation property. The Monte Carlo method is one of the useful ways to investigate the ion-target interactions. In this study, Chromium target irradiated by protons was investigated using Monte Carlo based simulation tools. In this context, the calculations of radiation damage on Chromium material irradiated with protons at 17.9 and 22.3 MeV energies were carried out using GEANT4 and SRIM codes. Besides, the cross sections for proton interaction with Chromium target were calculated by the TALYS 1.9 code using CTM + FGM, BSFGM, and GSFM level densities. As a result, GEANT4, SRIM and TALYS 1.9 codes provide a suitable tool for the predictions of radiation damage and cross cross section with proton irradiation.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.215-224
• /
• 2019

최근 복잡해지는 토목 공사 현장에서 요구되는 수요에 적합한 다기능 지오텍스타일의 개발이 요구되고 있다. 본 연구에서는 5종류의 위킹사를 섬유의 특성을 분석하고 요구 특성에 만족하는 위킹사를 선택하였고, 이 중에서 2종류의 위킹사를 적용하여 수평 위킹 배수 특성을 지니면서 보강에 적합한 지오텍스타일을 시제품을 개발하여 인장 강도, 2% 시컨트 모듈러스, 수직 투수율, 유효구멍크기, 직접 전단법에 의한 마찰 특성 및 수직·수평 위킹 시험을 수행하였다. 본 연구를 통해서 개발 된 수평 배수 특성과 분리 및 보강 성능을 지닌 지오텍스타일을 실내 토조실험을 통하여 수평배수능력에 따른 풍화토 함수비 변화를 관찰하였으며, 개발된 지오텍스타일의 위킹성능에 의한 수평배수능력을 검증하였다. 실내 토조 실험 결과 위킹사를 적용하여 직조된 지오텍스타일은 수평방향으로의 과잉간극수를 배출하는 기능을 충분히 발휘하는 것을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.250-255
• /
• 2003

The position of a 3-dimensional(3D) point can be measured by using calibrated stereo camera. To obtain more accurate measurement ,more accurate camera calibration is required. There are many existing methods to calibrate camera. The simple linear methods are usually not accurate due to nonlinear lens distortion. The nonlinear methods are accurate more than linear method, but it increase computational cost and good initial guess is needed. The multi step methods need to know some camera parameters of used camera. Recent years, these explicit model based camera calibration work with the development of more precise camera models involving correction of lens distortion. But these explicit model based camera calibration have disadvantages. So implicit camera calibration methods have been derived. One of the popular implicit camera calibration method is to use neural network. In this paper, we propose implicit stereo camera calibration method for 3D reconstruction using support vector machine. SVM can learn the relationship between 3D coordinate and image coordinate, and it shows the robust property with the presence of noise and lens distortion, results of simulation are shown in section 4.

• 전산구조공학
• /
• 제8권2호
• /
• pp.115-121
• /
• 1995

고강도콘크리트(압축강도 400-700kgf/cm/sup 2)를 이용한 구조물의 강도성능과 휨변형을 정확히 구하는 해석방법을 제안하는 것이 본 연구의 목적으로서, 재료특성을 모델화하기 위하여 희귀분석을 이용한 고강도콘크리트의 응력-변형률관계와 사다리꼴 응력모델을 검토하여 그 적용성을 확인하였다. 내력과 변형의 해석방법으로서는 단면을 요소분할하여 재료의 응력-변형률관계를 이용한 모멘트-곡률관계의 해석을 이용하였다. 여기서 본 연구는 재료특성의 불확정 변수와 해석시의 반복계산에 의한 오차를 최소화하기 위하여 확률적 개념을 이용한 몬테카를로 시뮬레이션의 방법을 도입하여 내력 및 변위성능을 합리적으로 평가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.799-802
• /
• 2002

Korea Aerospace Research Institute has been developing a 50-meter class airship to demonstrate the technology to be used in the development of a stratospheric airship, and importance of accurate prediction of the dynamic behavior of an airship before flight test is widely conceived. The added mass has large impact on the dynamic characteristics of an airship unlike for an airplane and the added mass of the airship with empennage is predicted in this paper. At first, the usability of the strip theory is examined which integrates the analytic two dimensional results in the cross section along the longitudinal axis. A panel method with the surface distribution of sources is developed and its validity is also examined. Finally, the panel method with both source and doublet distributions is implemented, and it is validated and applied for the calculation of the added mass of a 50-meter class airship. Using the methods developed, the influence of empennage and control surface deflection on the added mass property of the airship is studied.

• 복합신소재구조학회 논문집
• /
• 제2권2호
• /
• pp.20-25
• /
• 2011

본 논문에서는 2차원 콘크리트 슬래브 철도교량을 특별직교이방성 복합적층판 이론으로 해석하였다. 슬래브의 해석에 있어 단면의 기하학적, 물리적 특성이 중립면에서 휨-연계강성 $B_{ij}$ = 0 이고, $D_{16}=D_{26}=0$임을 고려하였다. 교량상판은 특별직교이방성 판으로 거동한다. 이러한 경계조건을 갖는 단면 혹은 불규칙한 단면을 갖는 시스템은 해석적 해를 구하기가 매우 어렵다. 이러한 문제에 대한 해석을 위해서 유한차분법이 이용되었다. 본 논문에서는 보 이론과 유한차분법이 해석을 위해 사용되었다.

• Composites Research
• /
• 제22권5호
• /
• pp.24-29
• /
• 2009

본 논문에서는 포스트텐션된 철근콘크리트 슬래브를 특별직교이방성 복합적층판 이론으로 해석하였다. 슬래브의 해석에 있어 단면의 기하학적, 물리적 특성이 중립면에서 휨-연계강성 $B_{ij}=0$ 이고, $D_{16}=D_{26}=0$ 임을 고려하였다. 철근콘크리트 슬래브는 특별직교이방성판으로 거동한다. 이러한 경계조건을 갖는 단면 혹은 불규칙한 단면을 갖는 시스템은 해석적 해를 구하기가 매우 어렵다. 이러한 문제에 대한 해석을 위해서 유한차분법이 이용되었다. 본 논문에서는 유한차분법과 보 이론을 해석을 위해 사용되었다. 그 결과 보 이론에 의한 해석 값이 판 이론의 값에 근접함을 알 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1764-1773
• /
• 2011

This study is about how to handle very soft grounds consisted of coal and household garbage(organic soil), clay, silt and so on, through examining Seoul-Busan High-Speed railway 6-2nd section. The soft soil might induce long term settlement and lead to structure's differential settlement eventually. So, we performed the boring test for characteristic of railway ground, laboratory test and field survey for mechanical property. And we also collected the engineering data of ground and the data for the establishment arrangement. These data were examined thoroughly considering residual settlement and strength by high-speed railway design standard. As a result of this study, we can say high-speed railway ground must have enough bearing capacity and be settled under allowable residual settlement(10cm). And also it needs to replace soft ground with high quality sand for the fundamental solution. With the application of replacement method on this study, we expect enough condition to construct stable high-speed railway.

• Steel and Composite Structures
• /
• 제14권3호
• /
• pp.295-312
• /
• 2013

In this paper, a simplified approach based on critical temperature for fire resistance design of steel-concrete composite beams is proposed. The method for determining the critical temperature and fire protection of the composite beams is developed on the basis of load-bearing limit state method employed in current Chinese Technical Code for Fire safety of Steel Structure in Buildings. Parameters affecting the critical temperature of the composite beams are analysed. The results show that at a definite load level, section shape of steel beams, material properties, effective width of concrete slab and concrete property model have little influence on the critical temperature of composite beams. However, the fire duration and depth of concrete slab have significant influence on the critical temperature. The critical temperatures for commonly used composite beams, at various depth of concrete and fire duration, are given to provide a reference for engineers. The validity of the practical approach for predicting the critical temperature of the composite beams is conducted by comparing the prediction of a composite beam with the results from some fire design codes and full scale fire resistance tests on the composite beam.