• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.135-147
• /
• 2000

Section design of vehicle structure has been developed by two methods. One is the section property method which uses section property as a design variable. This method shows the tendency of an optimum section approximately. The other method is the section shape method which utilizes geometric parameter of section as a design variable. Practical solutions are obtained by this method. However, it is very expensive for large-scale problems due to the large number of geometric parameters. These two methods are compared through several sample problems. The finite element method is used for the structural and sensitivity analyses. The results are analyzed based on the number of function evaluations, the quality of cost function, the complexity of programing, and etc. The applications of both methods are also discussed.

• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1661-1666
• /
• 2003

The purpose of this study is to develop the simplified model of the crankshaft in the large marine engine for dynamic analysis. Because the actual engine system is under complex dynamic loading condition and it has multi-cylinder, the dynamic analysis is purchased at a high computation cost. In spite of this burden, the dynamic analysis must be perfonned to assure structural integrity of operating marine engine. Therefore, simplification of the analytic model is necessary for dynamic analysis. Beam-mass model, which is generated with the section property method, is the model simplified effectively. Section property method can provide desired section information by optimization technique. By applying beam-mass model to the crankshaft in the large marine engine, the usefulness of the proposed method was proven.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.202-209
• /
• 2007

Vehicle body frame stiffness affects the dynamic and static characteristics. Vehicle frame structural performance is greatly affected by crossmember and joint design. While the structural characteristics of these joints vary widely, there is no known tool currently in use that quickly predicts joint stiffness early in design cycle. This paper presents the joint design factors affecting on low frequency vibration. The joint factors are joint panel thickness, section property, flange width and weld point space. To study the effect on vehicle low frequency vibration, case studies for these factors are performed. And Sensitivity analysis for section property is performed. The result can present design guide for high-stiffness vehicle.

• Architectural research
• /
• 제10권2호
• /
• pp.37-42
• /
• 2008

This study is to get the proper evaluation of the residual property of reinforced concrete beam exposed to fire. This study focused on the strength resistance and analytical evaluation of RC members exposed high temperature. And this study is the basis analytical research to conduct the other studies. To analysis by the finite element method, the Total-RC program was used to analysis it and the Total-Temp program was also used to analysis the temperature distributions at the section. All of results were compared with the pre-existing experimental data of simple supported beam. Using it, the parameters influencing the structural capacity of the high temperature-damaged RC members and residual strength estimation are investigated. The temperature distribution and the structural capacity at the section are calculated in this step. An application of this method is compared with the heating test result and residual property test for simple supported beam which is subjected to ISO 834 test fire. The results of this study are as follows; 1) The loads-displacement relationship of RC beam, considering initial thermal stress of cross section and heat transfer analysis are estimated comparing analytical value with pre-existing experimental results. 2) by the heating time (0, 1, 2 hours), the results of analysis with parameters show that the load capacity exposing at fire is affected.

• 산업경영시스템학회지
• /
• 제19권40호
• /
• pp.329-339
• /
• 1996

This study presents the eigen ethnic function and mathematical processing method of human information. Human information can be definded as the overlap area taking the superposition property composed of intuition and sensory in stimulus/response (S/R) model, In S/R model, the intuition and sensory eigen ethnic function acts on the forming of perception. Perception process by the superposition property of intuition and sensory analogy to the basic neural network model. This analogy model extends to the analysis method. As an analysis method, optimal ratio number induced to the golden section ratio. Golden section ratio drived out by diverse source and implicated to the sensory and intuitive context such as beauty, harmony, optimality etc. This numerical orders can be applied to analysing the Perception process and extended to pursue the Potential human behavior, On the basic of proposed applying method, an illustrative mathematical examples are presented.

• 한국공간구조학회논문집
• /
• 제7권5호
• /
• pp.83-87
• /
• 2007

비대칭 및 대칭 변단면 압축재( = m)의 임계하중을 수치 해석법의 하나인 유한 요소법으로 결정하였다. 해석에서 고려한 변수는 taper parameter(=a) 와 단면 성능 변수 m이다. 구조설계 및 구조의 안전 검토에 임하는 구조 기술자들의 편의를 위하여 유한요소법으로 결정한 임계하중의 계수 변화는 하나의 대수식으로 표시하였다. 대수식에 나타나는 계수들은 회귀분석법으로 결정하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3201-3207
• /
• 2011

This paper reviewed wave propagation of train vibration based on the study of high speed railway soft ground section with pile slab construction. In a filed of railway, concrete track has been adapted in a railway construction. And in order to maintain its track, soil improving method was required to control residual settlement. Within many soft ground settlement prevention techniques, pile slab method has an effect of minimizing residual settlement of soft ground. This is possible using support embankment load method by construct pile slab or cap the upper soft ground. This paper reviewed vibration wave characteristic of soft ground section with pile slab using numerical analysis application through finite element analysis. Pile slab method is established between high stiffened soft ground and embankment this creates a possibility of vibration block or slab amplification. Thus analyzed of wave propagation was done with roadbed and structure property to confirm application performance of pile slab method of high speed railway structure.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.238-246
• /
• 2000

In this paper, an optimization method of thin walled beam structures is proposed, Stiffnesses of a thin walled beam are characterized by the thickness of thin plates and the shape of the typical section of the beam. Explicit formula for section properties such as area, area moment of inertia, and torsional constants are derived using the response surface method. The explicit formula can be used for the optimal design of a structural system which consists of complicated thin walled beams. A vehicle structural system is optimized to demonstrate the proposed method.

• International Journal of Automotive Technology
• /
• 제3권3호
• /
• pp.117-122
• /
• 2002

Joint stiffness can affect the vibration characteristics of car body structures. Therefore, it should be included in vehicle system model. In this paper, a numerical approximation of joint stiffness is presented considering joint flexibility of thin walled beam-jointed structures. Using the proposed method, it is possible to optimize joint structures considering the change of section shapes in vehicle structures. The numerical approximation of joint stiffness is derived using the response surface method in terms of beam section properties. The study shows that joint stiffnesses can be effectively determined in designing vehicle structures.

• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.523-533
• /
• 1997

현존하는 매립형 합성기둥의 한계상태설계법은 합성재로서의 단면과 재료의 성능을 정의하는 설계식에 비논리적이며 모호한 부분을 내포하고 있다. 본 연구는 기존의 설계식을 제정하는데 사용한 과거의 연구자료를 조사하며 비논리적이며 모호한 점들을 분석하였다. 즉, 합성단면으로서의 항복강도와 탄성계수의 환산, 좌굴강도를 산정하는데 영향을 주는 설계식에서 단면2차모멘트 대신에 단면적의 사용. 강재 단면과 콘크리트 단면의 단면2차반경 중에서 큰 값의 적용등을 분석하였다. 본 연구는 기존의 설계식을 개선하며 두 가지 방법의 설계식을 제안하였으며 이 방법들은 실무 설계에 곧바로 적용될 수가 있다.