• 한국지구과학회지
• /
• 제26권6호
• /
• pp.511-523
• /
• 2005

본 연구에서는 한국 지구과학 올림피아드 문항의 질 향상 방안을 모색하고자 1회와 2회 예선 및 본선 문항을 다양한 측면에서 분석하였다. 문항 분석을 위해 내적 및 외적 문항 분류틀을 구안하여 적용하였다. 고전 검사이론을 적용하여 문항의 난이도와 변별도, 상관계수, 그리고 신뢰도를, 일반화가능도 이론을 적용하여 일반화가능 도를 각각 추정하였다. 문항 분류틀 적용 결과는 다음과 같다: (1) 내용 차원에서는 지질 영역과 천문 영역에, 지식 및 탐구과정 차원에서는 자료 분석 및 해석에 집중되는 경향을 보였다. 또한 맥락 차원에서는 거의 대부분의 문항이 교과서적인 상황을 토대로 한 것이었다. (2) 요구 사고 수준에서 예선과 본선간의 차이를 발견할 수 없었다. (3) 문항 표현 범주에서는 그림의 사용 비율이 가장 높았고, 문항 유형 범주에서는 예선은 선다형과 단답형의 비율이, 본선은 서술형의 비율이 높았다. 또한 문항 형식 범주에서는 중학부와 예선은 단독형의 비율이 높고, 고교부와 본선은 복합형의 비율이 높았다. 문항을 분석한 결과는 다음과 같다: (1) 중학부는 대체로 난이도가 낮고, 변별도는 적절하였다. 그러나 고교부는 일반고와 과학고간에 상당한 차이가 있었다. (2) 중학부는 대기 영역과 총점과의 상관이, 고교부는 천문 영역과 총점과의 상관이 가장 높았다. (3) 양호한 문항이 가장 많은 일반고부의 문항 내적 일관성신뢰도와 일반화가능도가 가장 높았다. (4) 일반 고는 출제된 문항 수로 적정 수준의 일반화가능 도에 도달되나, 중학부나 과학고는 출제된 문항보다 2배 이상 많은 문항수가 필요한 것으로 나타났다.

• 대한가정학회지
• /
• 제20권4호
• /
• pp.1-12
• /
• 1982

This study was to investigate the changes of shape of the lower limb surface, the rate of the measurement of expansion and contraction and correlation coefficient between variables caused by hip joint and knee joint movements. The results of the investigation are as follows; 1. According to the development figure of shell when the leg was raised $45^{\circ}$forward($M_{2}$), total length of F.L shortened while B.L lengthened. This result is contarary to $M_{3}$raising the leg $15^{\circ}$ backward. In both $M_{2}$, $M_{3}$movements, the rate of expansion and contraction to the course direction was insignificant. When hip joint was bent $15^{\circ}$ with knee joint $120^{\circ}$bent ($M_{4}$) and hip joint was bent $30^{\circ}$ with knee joint $90^{\circ}$ bent($M_{5}$), upper section of back hip expanded while the front hip section contracted slightly. In the Movement of sitting on the chair($M_{6}$), abdomen, front hip section and upper thight section contracted to the wale direction remarkably while the back hip section expanded conspicuously. 2. According to the rate of expansion and contraction of skin (surface) by the somatometry. In $M_{2}$, C.F.L. upper and middle thight girth contracted and B.L, C.L, L.L expanded. This fact is contarary to M3. In M4, M5, C.F.L showed remarkable contraction and C.B.L expanded remarkably. In $M_{6}$, C.B.L contracted most of all the items measured and knee girth, F.L, L.L, C.B.L, hip girth expanded conspicuously. 3. According to the correlation coefficient between variables. In various movements, the correlation among girth items commonly showed a high or middle grade, the correlation among length items also commonly showed a low grade and that girth and length items showed a very low grade commonly. Waist girth, hip grith, F.L, B.L, L.L items showed that there were significant correlation.

• 대한간호학회지
• /
• 제20권2호
• /
• pp.131-141
• /
• 1990

Recently, the rate of cesarean section in Korea has been increasing. The results of several previous studies in foreign countries on the emotional responses of cesarean section mothers showed that they might experience difficulties in the mother- infant interaction due to fatigue, lack of early mother - infant interaction, disappointments, anger, feelings of loss of control, and other factors. Human behavior is said to be determined by one's self concept, and self concept is influenced by both internal and external environmental factors. A scale to measure the self concept of cesarean section mothers was needed in order to identify those who might have difficulties in the mother- infant interactions in future. The purposes of this study were to develop a measuring scale, and to test its reliability and validity. The process of this study was as follows. A structured interview was done with 50 cesarean section and vaginal delivery mothers to find their state of emotional reaction after giving birth to their babies. Based on the results of the interviews, a 50 items Likert scale was developed. The self concept of 268 cesarean section and vaginal delivery mothers who were hospitalized at six hospital in seoul were measured, during the period between Feb. 1 and April 30. Reviewing the discriminating power of each item by means of crosstabulation, ten items were selected for the final scale. The reliability and validity of this ten item scale were tested by Cronbach's alpha and t-test, using spss pc＋package. The results of this study and recommendation are as follows. 1. The ten selected items were as follows. I feel pains in my breast. (－) I have a good appetite now. (＋) I feel pains in my flank. (－) I feel fine now. (＋) My body seems to have returned to its prepregnant state. (＋) Thinking of the delivery process, I feel sorry. (－) I want to hold my baby in my arms. (＋) I want to keep my own life, even if I became a mother. (－) I want to delegate the care of the baby to my mother / mother in law. (－) I think baby is my alter ego. (＋) 2. The reliability of this scale was tested by Cronbach's alpha, and the coefficient of this scale was .8066. 3. The construct validity of this scale was tested by means of known group methods. The value of self concept for cesarean section mother was significantly lower than for vaginal delivery mothers(t＝-5.51, df＝266, p＝0.007). 4. The criterion validity of this scale was tested indirectly. Though this scale could discriminate the differences in the self concept between cesarean section and vaginal delivery mothers, the five items on the personal self concept scale didn's show any differences between cesarean section and vaginal delivery mothers. Therefore, the study indicates that those who shows lower values in the personal self concept measurement, that is, lower than 12.03 points, could be regaled as “risk mothers” 5. Further studies using this scale to clarify the influencing factors on negative self concept are strongly recommended.

• 한국간호교육학회지
• /
• 제4권1호
• /
• pp.66-80
• /
• 1998

With the opening of healthcare market, the health care environment in Korea is anticipating a drastic change. In this Internationally open market environment, it is necessary to introduce a systematic health care plan and DRG system which offer qualitative medical services as well as reduced cost. Purpose of this study is to develop and test the critical pathway for Cesarean section patient in the way to be possible the integrated inpatient management. It was adopted the process of six phases to develop the critical pathway as the theoretical framework implemented by Johns Hopkins Hospital, Maryland, U.S.A. In the first phase, make a selection of diagnosis/procedures to develop. In the second phase, organize a development team consisted of eight expertises working in maternity nursing area. In the third phase, analyze the overall medical service offered to patient through review medical records and decided the service content and the implementation period for the Cesarean section patient. In the forth phase, make out a preliminary critical pathway after verification of expert group on content validity. In the fifth phase, validity operate to ten Cesarean section patients to test implementation in practice by using the preliminary critical pathway, In the sixth phase, defined the final critical pathway. The result of this study was as follows. 1. There were classified 8 categories as monitoring/assesment, treatment, medication, activity, diet, test, consult, education/discharge plan for vertical axis and showed hospital stayed from admission to discharge for horizontal axis of critical pathway through analysis 68 Cesarean section patients medical records. 2. After critical review 68 medical records to make out a preliminary critical pathway, hospital stays for horizontal axis were showed 6 days, mean hospital stays were 7.5 days, 2.1 days were to be taken operation after admission and 4.2 days were stayed until discharge after operation. 3. After making out a questionare in 90 items of a medical service content of eight categories and verifying the content validity of expertises, the 85 items of the preliminary critical pathway were selected by expertises agreement over 88% and modified or deleted 5 items showing agreement below 75%. 4. After verifying a validity to 10 patients for 4 weeks, hospital stays were 5.9 days. There were deleted 1 item and modified or supplemented the 9 items of the 10 items.

• 한국실내디자인학회논문집
• /
• 제18권1호
• /
• pp.99-107
• /
• 2009

In order to prepare future green hospital architecture authentication system, this study is a comparative year report to Korean, the United States, Japanese, British, Canadian and Australian green building authentication systems. Also, the United States and Australian Green hospital authentication systems were examined, and the authentication items of hospitals were compared with those of civil architecture. Though the examination and analysis, the portion of indoor environmental quality section commonly shows the average of 20.7 percent in all 6 countries. Especially, IAQ(Indoor Air Quality) among inside IEQ(Indoor Environment Quality) is overwhelmingly much treated in Korea, the U.S.A, Canada and Australia. In Japan, heat, light and sound are the important factors for authentication evaluation, while in the U.K light are more emphasized for the authentication. 'LEED for Healthcare' as a hospital evaluation authentication system subdivided currently most. The system includes the detailed and extensive evaluation items ranging from hospital management, traffic, emission, water resources utilization to integrated design and furnishing. These overseas systems should be carefully investigated, researched and analyzed for an appropriate improvement of domestic green hospital authentication system. Also the current evaluation method of IEQ section of Korean GBCC needs to be modified. That's why the method puts too much importance on IAQ in IEQ section.

• 패션비즈니스
• /
• 제8권6호
• /
• pp.25-38
• /
• 2004

The purpose of this study is to develop a dress form for elderly women according to their somatotype to be used for improving the fit of garments and patterns. Analyzing each somatotype, there was a significant difference among the 4 somatotypes in most of measure items. Bend-forward Group had shorter front length items. Abdomen-fat Group had lower upper-body values than Average Group and similar lower-body values to Fat Group. In most items except height, Fat Group had the biggest values. Analyzing the mean cross-section according to the section measurement parts, no difference existed in shoulder part and under bust part. However, in upper bust, bust, waist, abdomen, high hip, and hip parts, a significant difference existed. Also, according to the results of the mean cross-section as well as the average cross overlap section for each somatotype, there was a significant difference among the four somatotypes. Thus, Abdomen-fat Group and Fat Group were similar, while Bend-forward Group and Average Group were alike. According to the increase of age, lower body tended to have more conspicuous changes. Analyzing the profile of somatotypes, there existed a obvious significant difference among the 4 somatotypes, implying that the characteristics of somatotype need to be reflected when to develop dress forms for elderly women. Therefore, these differences must be an essential factor in pattern design. Comparing the current dress form with the dress form developed with simulation, we could find that a dress form developed for elderly women which reflects the characteristics of body shape is much better than a dress form developed by simple size variation such as small, medium and large size divisions to improve the fit of garments and pattern designs.

• ETRI Journal
• /
• 제16권1호
• /
• pp.59-72
• /
• 1994

In this paper, a new N-way hybrid power combiner for improving the graceful degradation performance has been proposed. The proposed combiner has been configured with two dummy transmission lines per each section, where each dummy transmission line has a different characteristic impedance, of the standard combiner. Under this proposed configuration, a detailed theoretical analysis has been performed to show the general function of a power combiner. When any M amplifiers among N identical amplifiers are suffering the failure mode in a power combining circuit or system, the graceful degradation performance has been improved due to the separation of a transmission line and an internal resistor in every failed section from the proposed combiner by simultaneously operating two shorting devices. Simulation results for all the items which can be measured from all the items which can be measured from the proposed combiner with an eight-way configuration have been presented.

• 한국건설관리학회논문집
• /
• 제12권6호
• /
• pp.160-167
• /
• 2011

본 연구는 공동주택 내에 설치되는 주민복지시설의 활성화를 위해 사전 타당성 평가 모델 구성을 목적으로 수행되었다. 이를 위해 D신도시에 위치한 공동주택 단지 5곳을 사례대상으로 선정한 후 주민복지시설의 현황을 조사하였다. 그리고 타당성 평가 항목 조사를 위해 선정된 사례대상 공동주택 5곳의 거주자 및 이용자를 대상으로 설문조사를 수행하여 기획단계, 설계단계, 운영단계로 구분하여 타당성 평가 항목을 도출하였다. 기획단계, 설계단계, 운영단계에 대한 타당성 평가 항목 도출 결과를 바탕으로 AHP기법을 활용하여 평가 항목에 대한 중요도를 분석하였다. 중요도 분석 결과 값의 검증을 위해 관련 전문가의 설문을 통해 중요도 분석 결과 값을 비교하였다. 상기와 같은 목적과 방법에 따라 도출된 결과를 정리하면 다음과 같다. 공동주택 단지 내 주민복지시설의 활성화를 위한 사전 타당성 평가 항목의 중요도 분석 결과 기획단계(P-1)의 경우 이용시설구성, 사용자조사, 시설배치 항목이 가장 높게 분석되었으며, 설계단계(P-2)의 경우 실별 평면배치, 동선계획, 교구비품 항목이 가장 높게 분석되었다. 그리고 운영단계(P-3)의 경우 운영비, 운영일정, 이용시설검토 항목이 가장 높게 분석되었다.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.15-21
• /
• 2008

Purpose : This epidemiological research was conducted to investigate the relationship between the groups of TMD and the behavioral, psychological, and physical symptoms through RDC/TMD. Subjects and Methods : The subjects of this research were the 286 patients who had visited Seoul National University Bundang Hospital; their common chief complaint was temporomandibular discomfort. The mean age of the patients was 32.9 from 11 to 85, and the number of men and women was 67 and 219, respectively. The patients were examined through clinical and radiological methods and diagnosed by 1 investigator. They were divided into 3 groups: myogenous group (group 1), arthrogenous group (group 2), and combined group (group 3). The behavioral, psychological, and physical symptoms were evaluated through questionnaires on RDC/TMD. Specific items were selected to calculate the graded chronic pain (characteristic pain intensity, disability points), jaw disability, depression, and non-specific physical symptoms (pain items included/excluded) in the questionnaire. One-way ANOVA, Kruskal-Wallis test, and chi-square test were applied as statistical methods. Results : As a result of classifying temporomandibular disorder in this study, the patients were distributed as follows: 9.1% of group 1, 79.7% of group 2, and 11.2% of group 3. In the analysis of graded chronic pain (characteristic pain intensity, disability points), jaw disability, and non-specific physical symptoms (pain items included/excluded), group 3 had the highest score, and the difference was significant (p<0.001). Moreover, the depression score of group 3 was significantly higher than groups 1 and 2 (p<0.05). Note that that the second order of jaw disability score was group 2, on the other hand, those of the other groups were group 1. Conclusion : Myofascial pain could be assumed to be related closely to the behavioral, psychological, and physical symptoms except jaw disability compared to joint pain through RDC/TMD.

• 공학교육연구
• /
• 제22권3호
• /
• pp.3-10
• /
• 2019

The purpose of this study is to analyze the educational needs of the industry for engineering education using the engineering competency scale. For needs assessment, t-test, Borich Needs Assessment and the Locus for Focus(LFF) were conducted using 400 employees' answers of industry. The results of this analysis are as follows. First, there was a significant difference between the level of importance and actual level. Second, all items were ranked using the Borich's needs assessment formula. Third, as a result of LFF model, 19 items were placed in the highest priority HH section. Fourth, 17 items with the highest priority in engineering education were selected. Finally, the highest educational needs were 6 items related with interpersonal skills, 2 items related with leadership, and 9 items related with professional attitude and ability. Based on the results of this paper, it is necessary to develop and operate an education program to reduce the gap between the industry requirement and the current level of engineering students.