• Journal of radiological science and technology
• /
• v.43 no.5
• /
• pp.383-388
• /
• 2020

High-energy proton accelerators continue to be increasingly used in medical, research and industrial settings. However, due to the high energy of protons, a large number of secondary radiation occurs. Among them, neutrons are accompanied by difficulties of shielding due to various energy distribution and permeability. So In this study, we propose a shielding method that can shield neutrons most efficiently by using multiple-shielding material used as a decelerating agent or absorbent as well as a single concrete shielding. The flux of secondary neutrons showed a greater decrease in the flux rate when heavy concrete was used than in the case of ordinary concrete, and the maximum flux reduction was observed at the front position when using multiple shields. Multiple shielding can increase shielding efficiency more than single shielding however, As the thickness of the multiple shielding materials increased, the decline in flux was saturated. The mixture material showed higher shielding results than the polyethylene when using boron carbonate.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.9-15
• /
• 1977

The author observed the effect of X-ray irradiation on the secondary palate formation of the rat fetuses. The mothers were exposed to X-radiation on the 10½th, 11½th and 12½th day of gestation with respectively 150, 200, 250, 300 and 350 rads. The fetuses were removed from mothers on 15½h, 16½th and 18½th day of gestation. Morphological changes in palate formation were examined and histochemical preparations were made. 1. In control fetuses, the secondary palates were fully developed on the 15½th to 18½th day of gestation. But in experimental fetuses, many cleft palates were observed in accordance with increase of X-radiation dose. 2. Frequency of incidence of horizontal position of both palated shelves in cleft palate was highest. 3. Accordig to the dislocation of palatal processes, the stain ability of palatal crest was varied. 4. The thickened area of palatal epithelium of palatal crest showed intense methyl green-pyronin and PAS reaction 5. Mesenchymal cell condensation was appeared under the thickened epithelium of palatal process and this mesenchymal tissue showed strong colloidal iron reaction. 6. The stain ability of alizarin red S and alkaline phosphatase reaction of tectal ridge were decreased, in accordance with increase of irradiation doses.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1097-1103
• /
• 2006

Community structure varies not only in space but also in time. We stand in one position which located at Sinhung-ri, Sacheon-ci and observe the flora of area as time passes. This area begins after disturbance on sites where organisms are already present like secondary succession. In 2001, there are invaded by Trapa japonica, Salvinia natans, and Potamogon cristatus. Four or five years later, this abandoned areas support of clover, pine, and oak, resulting in a shifting pattern of species dominance and diversity through time. Patterns of community structure such as species composition and ecological diversity have shown through seasons and five years, that is the topic of this study. The values of turnover (TO) were changes through time intervals at three regions. The gradual and seemingly directional change in the structure of the community through time from aquatic like to field. Thus, we can observe the process of secondary succession at Sinhung-ri in the very short time.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.305-314
• /
• 2022

In this paper, we propose a "social mentality" of primary and secondary school teachers in Anshan City, China. To conduct the study, 298 teachers in Ansan City were selected and a survey was conducted. This study adopted the method of combining literature research and questionnaire survey. The results showed that the overall level of "social mentality" of primary and secondary school teachers in Anshan was relatively high. Teachers' social support levels differed significantly from educational background, teaching section, administrative position, and school location. The path model shows the interaction mechanism between variables. It appeared that general self-efficacy and job involvement play an important role in the mechanism.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.69-78
• /
• 2022

A high-resolution camera is a precise optical system. Its vibrations during transportation and launch, together with changes in temperature and gravity field in orbit, lead to different degrees of defocus of the camera. Thermal refocusing is one of the solutions to the problems related to in-orbit defocusing, but there are few relevant thermal refocusing mathematical models for systematic analysis and research. Therefore, to further research thermal refocusing systems by using the development of a high-resolution micro-nano satellite (CX6-02) super-resolution camera as an example, we established a thermal refocusing mathematical model based on the thermal elasticity theory on the basis of the secondary mirror position. The detailed design of the thermal refocusing system was carried out under the guidance of the mathematical model. Through optical-mechanical-thermal integration analysis and Zernike polynomial calculation, we found that the data error obtained was about 1%, and deformation in the secondary mirror surface conformed to the optical index, indicating the accuracy and reliability of the thermal refocusing mathematical model. In the final ground test, the thermal vacuum experimental verification data and in-orbit imaging results showed that the thermal refocusing system is consistent with the experimental data, and the performance is stable, which provides theoretical and technical support for the future development of a thermal refocusing space camera.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.42-48
• /
• 2023

Abstract: In this study, an induction heating system using resonance is developed to remove remaining moisture and contaminations which could be generated during fabricating secondary batteries. This system is composed of power supply and induction coil. Power supply needs an oscillator, zero crossing detection, frequency tracking function, and induction coil needs a dummy coil to obtain a uniform temperature distribution. It is very important to obtain a uniform heating temperature distribution of battery cell case in the induction heating system before pouring electrolyte into battery cell. Experimental results show a temperature distribution deviation of below 1℃ in the external position of battery cell cases. As well, the temperature of battery cell itself shows distribution of 40℃±3℃.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.49-56
• /
• 2008

In order to reduce energy consumption, secondary controlled system has been applied to many types of equipments. In lifting equipments or press machines using hydraulic cylinder, a hydraulic transformer is used as a control component instead of a valve for motion control and a component for recovering potential energy of load. The transformer is a combination of a variable displacement pump/motor as a secondary controlled element and a fixed displacement pump/motor. In this paper the effect of transformer is studied. Multiple closed loop controllers with displacement feedback of variable pump/motor, speed feedback and position feedback of cylinder are used. The efficiency and energy consumption when cylinder is driven up and down is calculated by simulation. Simulation results show that considerable energy saving is achieved by choosing load ratio, circuit type and supply pressure.

• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.223-243
• /
• 1983

palaeomagnetism is a major implement to define tectonic provinces and to estimate their past relative position quantitatively. In this sort of investigation it is tacitly assumed that the magnetization of the rocks under study was acquired at the time of their formation. However, because of the possibility of secondary alteration and/or replacement of magnetic minerals, this assumption is not always legitimate. To secure reliable palaeomagnetic data it is therefore fundamental to identify the carrier mineral of magnetization. This paper reviews magnetic mineralogy relevant to palaeomagnetism of terrestrial rocks. Under the heading of each mineral its genesis, crystal structure, magnetic properties, criteria for ore microscopic determination and secondary alteration are summerized. This paper should also be helpful in application of magnetic mineralogy to geothermometry and oxygen barometry in igneous petrology, diagenesis and provenance study in sedimentary petrology, metamorphic temperature determination and genesis study of ore deposits.

• Journal of The Korean Association For Science Education
• /
• v.24 no.4
• /
• pp.675-686
• /
• 2004

The enhancement of the quality of the teaching practice is a major factor in securing better schooling opportunities for students. In this article, initial teacher preparation of secondary school Earth science teachers, in-service science teacher education, and improving teacher policy are discussed. Data from in-depth interviews with exemplary science teachers were used to explore how to improve the quality of science teacher education in Korea. In terms of preservice teacher education, most exemplary teachers contended that teacher education programs should provide preservice teachers with practical knowledge by translating theory into practice. Their suggestions for how to improve in-service education are also discussed. Regarding directions of improving teacher policy in Korea, the teachers proposed an alternative teacher-promotion structure that incorporates the master-teacher position. Implications for introducing action research courses into teacher (re)education programs are also discussed.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.28-30
• /
• 1998

In the case of long secondary (applied in long distance), as it is established horizontal, the defects of droop arises resulting damage of entire system. Actually, it is difficult to expect reasonable characteristics and desirable operating in that case. This paper is about numerical analysis of secondary droop, non-symmetric and position displacement problems. In the base of this paper, the correction of mechanical difficulties in practical manufacturing and optimal design of TLIM considering these aspects can be progressed successively.