• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.10 s.241
• /
• pp.1092-1100
• /
• 2005

In the present study, characteristics of steady state laminar flows of a straight duct connected to a 180$^{o}$ curved duct were examined in the entrance region through experimental and numerical analyses. For the analysis, the governing equations of laminar flows in the Cartesian coordinate system were applied. Flow characteristics such as velocity profiles and secondary flows were investigated numerically and experimentally in a square cross-sectional straight duct by the PIV system and a CFD code(STAR CD). For the PIV measurement, smoke particles produced from mosquito coils. The experimental data were obtained at 9 points dividing the test sections by 400 3m. Experimental and numerical results can be summarized as follows. 1) Reynolds number, Re was increased, dimensionless velocity profiles at the outer wall were increased due to the effect of the centrifugal force and secondary flows. 2) The intensity of a secondary flow became stronger at the inner wall rather than the outer wall regardless of Reynolds number. Especially, fluid dynamic phenomenon called conner impact were observed at dimensionless axial position, x/D$_{h}$=50.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.3
• /
• pp.19-26
• /
• 2010

This study is aimed to look into the craftsmanship non-educated constructors in Korean-style secondary stations(Gong-So) of Naepo region which is located in the northwestern Chungcheongnam-do. Although the area was persecuted as one of three cradles of Korean Catholicism, Catholic activities flourished there. The 13 cases of Korean-style secondary stations were selected through a survey report list about modern cultural assets of Chungcheongnam-do published in december 2004. This study examined the methods of plan layout and framework of Gong-So to look into craftsmanship of non-educated constructors, the results are as follows; The methods of plan layout are divided into three types according to existence and arrangement of inner column(Nae-Ju); 'Layout with Nae-Ju' is considered as the primary form of Korean-style Gong-So with using regular Nae-Ju. 'Layout with the different position of the center between Nae-Ju and exterior column(Oe-Ju)' and 'layout without Nae-Ju' is appeared in Korean-style Gong-So which is important to assembly and alter function. The methods of framework are appeared variously according to different plan layout for securing worship space. The unusal beam(Chung-Ryang) is used to solve different spans of altar and narthex. When space was formed widely without Nae-Ju, diagonal members and M letter type rafters are used, they are influenced by the technique of western wooden roof truss.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.284-286
• /
• 2009

In this paper, we consider a cognitive radio system operating as secondary user. It uses an empty channel that is not currently used by primary users having the license to the channel. In the previous works, secondary user looks for an empty channel by choosing any channel in order or randomly and by sensing the channel to distinguish whether primary users are using. But if primary user is fixed type, we will find an empty channel faster than the mentioned channel selecting methods by using a method considering prior information about cases that primary user used the channel, since it is possible to analogize the channel access possibility of primary user according to regular time and position. Therefore, we propose a channel searching method based on the channel list for the purpose of reducing the channel searching time and improving throughput of secondary users. Firstly, we determine a weighting value of each channel based on the history of channel activities of primary users. This value is added to current channel state buffer and we search an empty channel from channel with smallest value to one with the biggest value. Finally, we compare the performances of the proposed method with those of the sequential channel searching and the random channel searching methods in terms of the average channel searching time and the average number of transmissions of secondary user.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.453-458
• /
• 2000

The paper describes a study of the variation of the NO production emitted from turbulent propane flames established on a practical combustor where a primary and a secondary fuel lines are installed. The flowrate of the secondary fuel is pulsated or added in addition to that of the primary fuel which constrantly flows to the nozzle of the burner. Two modes depending on the positions of supplying the secondary fuel are performed; one is for its position to be placed at the center of the primary fuel tube and the other around the stabilization baffle. The mean concentrations of gas species, $O_2,\;Co\;CO_2,\;NO$, and HC(unburnt hydrocarbones) have been measured at the exit of the combustor. As equivalence ration $({\Phi})$ is increased the profile of the NO concentration on the latter mode rises slowly less than that on the former one. In the range of ${\Phi}=0.5$ to 0.54 the NO production is reduced by about 35% more on the latter mode than on the former one. The influence of pulsating the secondary fuel on the variation of the NO concentration doesn't appear at both modes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.8
• /
• pp.562-570
• /
• 2011

In this research, an experimental study is performed to investigate the effects of system operating variables on the cooling and heating characteristics of heat pump system using geothermal heat source and carbon dioxide as a refrigerant. System variables analyzed include compressor frequency, electronic expansion valve opening, refrigerant charge, secondary fluid temperature and flow rate. Results show that optimum refrigerant charge and electronic expansion valve opening position exist at the maximum point of COP curve, and both cooling and heating capacity increase but COPs decrease with the increase of compressor frequency. The change of a secondary fluid temperature leads to variation of overheat area and enthalpy difference in the evaporator and gas cooler. which again results in considerable variations of cooling and heating capacity and COP. In the case of effects of secondary water fluid flow rate, both cooling capacity and COP increase with the increase of secondary flow in evaporator or gas cooler, whereas heating capacity and COP decrease with the increase of flow rate in gas cooler.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.13-21
• /
• 2000

The advantages of the SITVC (Secondary Injection for Thrust Vector Control) technique over mechanical thrust vectoring systems include a reduction in both the nozzle weight and complexity due to the elimination of the mechanical actuators that are used in conventional vectoring. The optimal operating conditions of SITVC were investigated using in-house developed compressible flow analysis codes. Numerical experiments were used to examine the impact of the thrust vector direction with a variety of injection positions, mass flow rates, and injection angles on the two-dimensional expansion cone of a supersonic nozzle. The computational results showed that the optimal position of the secondary injection, with the maximum deviation angle and side thrust, was where the oblique shock generated by the secondary injection reached the end of the nozzle exit.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1154-1156
• /
• 2001

This paper presents the implementation of a positon sensorless vector control system of a PM linear synchronous motor by sliding mode observer based on TMS320F240 DSP controller. Sliding mode observer estimates the secondary velocity and position based on the measurement of current, and it shows very robust characteristic to parameter variation. Therefore, it improves the system performance deterioration caused by system parameter variations. Simulation and experimental considerations are presented to confirm the applicability of sliding mode observer to the sensorless position control of PMLSM.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1343-1348
• /
• 1990

The architecture and functions of a prototype free ranging AGV system are described in this paper. The system has single tricycle configuration - the front wheel is driven and steered simultaneously. The primary position measurement device of this system is the redundant encoder system - an absolute encoder for the steering angle measurement of the front wheel, two incremental encoders for the measurement of the rear wheel rotations. The secondary position measurement device is implemented to reduce the accumulatad error in encoder measurements. The extended Kalman filter is suggested to combine the conflict measurement data for the proper position estimation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.359-371
• /
• 2017

This study qualitatively examined the lives of non-tenured, secondary school teachers who are preparing for the teachers' exam. Semi-structured, face-to-face interviews were conducted with ten teachers and the data were analyzed using the consensual qualitative research method. Most of the participants had chosen a contract-based teaching position, believing that it would meet their financial needs, provide them with the satisfaction of being a teacher and, more importantly, afford practical help with their exam preparation. In practice, however, they suffered from low self-esteem and identity confusion due to discrimination by the school administrators. Ironically, this unfair treatment strengthened the participants' commitment to studying for the exam, in order to acquire a stable and secure position in school. However, they experienced a lot of study-related stress, including a lack of study hours, heavy study load, multiple life roles, physical exhaustion, the difficulties caused by the vague exam guide, and anxiety due to previous failure in the exam. Based on the findings of this study, directions for future research are suggested.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.465-470
• /
• 2008

Purpose: Reduction malarplasty is a popular aesthetic surgery for contouring wide and prominent zygoma. However a few patients complain postoperative results and want to revise the midfacial contour. We analyzed the etiology of unfavorable results and treated unsatisfied midfacial contours after reduction malarplasty. Methods: Total 53 patients were performed secondary operation for correction of unfavorable results after primary reduction malarplasty from elsewhere. Midfacial contour was evaluated with plain films and three-dimensional computed tomography. Unfavorable midfacial contours were corrected by secondary malarplasty. Flaring of zygomatic arch was reduced with infracturing technique and prominent zygomatic body was reduced with shaving. Drooped or displaced zygoma complex has been suspended to higher position and fixed with interosseous wiring. As adjuvant procedure, autologous fat injection has been performed in the region of depressed zygomatic body region. Results: The etiology of unfavorable midfacial contour after reduction malarplasty was classified into 7 categories: undercorrection of zygomatic arch(n=8), undercorrection of zygomatic arch and undercorrection of zygomatic body(n=6), undercorrection of zygomatic arch and overcorrection of zygomatic body(n=28), overcorrection of zygomatic body(n=3), simple asymmetry(n=4), malunion(n=2) or nonunion(n=2). Slim and balanced malar contour was achieved with treatment. And most of the patients were satisfied with the results of the surgery. Conclusion: To prevent the unfavorable results after reduction malarplasty, complete analysis of facial contour, choice of appropriate operation technique, precise osteotomy under direct vision, and security of zygoma position are important.